A2784 UNIA19082806 Smacat V03 MPE Test Report

FCC ID: 2AUJH-V03

RF Exposure Info

Download: PDF
FCCID_4455883

FCC MPE TEST REPORT FCC ID: 2AUJH-V03 Product： Wireless Car Charger Trade Name： N/A Model Name： V03 V01, V02, V04, V05, V06, V07, V08, V09, Serial Model： V10, V11, V12, V13, V14, V15, V16, V17, V18, V19, V20, V21, V22, V23, V24, V25, V26, V27, V28, V29, V30 Report No.： UNIA19082806FR-02 Prepared for Shenzhen Smacat Electronic Technology Co., Ltd. 6th Floor, Building A1, Yangbei Industrial Zone, Huangtian Hangcheng, Baoan, Shenzhen, China Prepared by Shenzhen United Testing Technology Co., Ltd. 2F, Annex Bldg, Jiahuangyuan Tech P ark, #365 Baotian 1 Rd, Tiegang Community, Xixiang Str, Bao'an District, Shenzhen, China

TEST RESULT CERTIFICATION Applicant’s name .............. : Shenzhen Smacat Electronic Technology Co., Ltd. 6th Floor, Building A1, Yangbei Industrial Zone, Huangtian Address ................................ : Hangcheng, Baoan, Shenzhen, China Manufacture's Name ........ : Shenzhen Smacat Electronic Technology Co., Ltd. 6th Floor, Building A1, Yangbei Industrial Zone, Huangtian Address ................................ : Hangcheng, Baoan, Shenzhen, China Product description Product name ...................... : Wireless Car Charger Trade Mark ............................ : N/A V03, V01, V02, V04, V05, V06, V07, V08, V09, V10, V11, Model and/or type reference : V12, V13, V14, V15, V16, V17, V18, V19, V20, V21, V22, V23, V24, V25, V26, V27, V28, V29, V30 FCC KDB 680106 D01 RF Exposure Wireless Charging Standards ........................... : Apps v03 This device described above has been tested by Shenzhen United Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of UNI, this document may be altered or revised by Shenzhen United Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. Date of Test ......................................... : Date (s) of performance of tests ............ : Aug. 28, 2019 ~ Sep. 10, 2019 Date of Issue ........................................ : Sep. 10, 2019 Test Result............................................ : Pass Prepared by: Bob liao/Editor Reviewer: Kahn yang/Supervisor Approved & Authorized Signer: Liuze/Manager

Note: For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Channel List Channel Frequency(KHz) Channel Frequency(MHz) 01 125 The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. 1. SUMMARY OF TEST RESULTS 1.1 Test procedures according to the technical standards: FCC KDB 680106 D01 RF Exposure Wireless Charging Apps v03 FCC CFR 47 Standard Section Test Item Judgment Remark Electric Field Strength (E) (V/m) PASS FCC CFR 47 part1, 1.1310 KDB680106 D01 v03(3)(3) Magnetic Field Strength (H) (A/m) PASS Compliant with KDB680106 D01 RF Exposure Wireless Charging Apps v03 section 5,b: a) Power transfer frequency is less than 1 MHz. b) Output power from each primary coil is less than or equal to 15 watts. c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. d) Client device is placed directly in contact with the transmitter. e) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). f) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit.

1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y±U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Radiated Measurement (9KHz-30MHz) ±2.50dB 2 Temperature ±0.5°C 3 Humidity ±2% 1.3 Test Instruments Description Brand Model No. Frequency Range Calibrated Until Broadband Field Meter NARDA NBM-550 –– Jan. 01, 2020 Magnetic Field Meter NARDA ELT-400 1–400kHz Jan. 01, 2020 Magnetic Probe NARDA HF-3061 300kHz–30MHz Jan. 01, 2020 Magnetic Probe NARDA HF-0191 27–1000MHz Jan. 01, 2020 Broadband Field Meter NARDA NBM-550 –– Jan. 01, 2020 Electric Field Meter COMBINOVA EFM 200 5Hz–400kHz Jan. 01, 2020 E-Field Probe NARDA EF-0391 100kHz–3GHz Jan. 01, 2020 E-Field Probe NARDA EF-6091 100MHz–60GHz Jan. 01, 2020 NOTE: The calibration interval of the above test instruments is 12 months.

2. MAXIMUM PERMISSIBLE EXPOSURE 2.1 MAXIMUM PERMISSIBLE EXPOSURE Limit of Maximum Permissible Exposure Limits for Occupational / Controlled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) |E|²,|H|²or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Limits for General Population / Uncontrolled Exposure Frequency Range Electric Field Magnetic Field Power Density (S) Averaging Time (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) |E|²,|H|²or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180 / f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1 30 Note 1: f = frequency in MHz ; *Plane-wave equivalent power density. 2: For the applicable limit, see FCC 1.1310, 680106 D01 RF Exposure Wireless Charging Apps v03. 3: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. Page 5 / 8

2.2 TEST PROCEDURE For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be at 15 cm surrounding the device and 20 cm above the top surface. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair at 15 cm surrounding the device and 20 cm above the top surface. 2.3 SET UP 2.4 TEST PHOTO Page 6 / 8

3. RESULT OF MAXIMUM PERMISSIBLE EXPOSURE For Full load mode: E-Filed Strength at 15 cm surrounding the device and 20 cm above the top surface (V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.22 1.10 1.12 1.16 1.11 307 614 H-Filed Strength at at 15 cm surrounding the device and 20 cm above the top surface (A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.17 0.16 0.22 0.18 0.20 0.815 1.63 For Half Load for wrist band mode: E-Filed Strength at 15 cm surrounding the device and 20 cm above the top surface (V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.18 1.18 1.16 1.16 1.18 307 614 H-Filed Strength at 15 cm surrounding the device and 20 cm above the top surface (A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.18 0.16 0.20 0.21 0.22 0.815 1.63 Page 7 / 8

For Half Load for shopped mode: E-Filed Strength at 15 cm surrounding the device and 20 cm above the top surface (V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.18 1.16 1.15 1.15 1.16 307 614 H-Filed Strength at 15 cm surrounding the device and 20 cm above the top surface (A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.16 0.16 0.18 0.18 0.16 0.815 1.63 For No load mode: E-Filed Strength at 15 cm surrounding the device and 20 cm above the top surface (V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.16 1.18 1.20 1.21 1.18 307 614 H-Filed Strength at 15 cm surrounding the device and 20 cm above the top surface (A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.18 0.18 0.16 0.16 0.18 0.815 1.63 ※※※※※※THE END※※※※※※ Page 8 / 8


Document Created: 2019-09-24 14:26:00
Document Modified: 2019-09-24 14:26:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC