RF Exposure

FCC ID: 2AUHL-U0633

RF Exposure Info

Download: PDF
FCCID_4495382

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: 2AUHL-U0633 Maximum Permissible Exposure Report 1. Product Information FCC ID : 2AUHL-U0633 EUT : Mini 802.11ac Wireless USB Adapter Test Model : U0633 Power Supply : 5V/130mA Hardware version : V1.1 Software version : 1030.28 WIFI(2.4G Band) : Frequency Range : 2412MHz-2462MHz Channel Spacing : 5MHz Channel Number : 11 channels for 20MHz bandwidth (2412~2462MHz) 7 channels for 40MHz bandwidth (2422~2452MHz) Modulation Type : 802.11b: DSSS; 802.11g/n: OFDM Antenna Description : omni Antenna, 5dBi (Max.) WIFI(5.2G Band) : Frequency Range : 5180-5240MHz Channel Number : 4 Channels for 20MHz bandwidth(5180-5240MHz) 2 channels for 40MHz bandwidth(5190~5230MHz) 1 Channels for 802.11ac(VHT80) Modulation Type : 802.11a/n: OFDM Antenna Description : omni Antenna, 5dBi (Max.) SRD(5.8G Band) : Frequency Range : 5745-5825MHz Channel Number : 5 channels for 20MHz bandwidth(5745-5825MHz) 2 channels for 40MHz bandwidth(5755~5795MHz) 1 channels for 80MHz bandwidth(5775MHz) Modulation Type : IEEE 802.11a/n/ac: OFDM(64QAM, 16QAM, QPSK, BPSK) Antenna Description : omni Antenna, 5dBi (Max.) Exposure category : General population/uncontrolled environment EUT Type : Production Unit Device Type : Mobile Device This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 8

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: 2AUHL-U0633 2. Evaluation Method Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane-wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. 3. Limit 3. 1 Refer evaluation method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices. 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Electric Field Magnetic Field Power Density Averaging Time Range(MHz) Strength(V/m) Strength(A/m) (mW/cm²) (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 614 1.63 (100) * 6 3.0 – 30 1842/f 4.89/f (900/f2)* 6 30 – 300 61.4 0.163 1.0 6 300 – 1500 / / f/300 6 1500 – 100,000 / / 5 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Electric Field Magnetic Field Power Density Averaging Time Range(MHz) Strength(V/m) Strength(A/m) (mW/cm²) (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 614 1.63 (100) * 30 3.0 – 30 824/f 2.19/f (180/f2)* 30 30 – 300 27.5 0.073 0.2 30 300 – 1500 / / f/1500 30 1500 – 100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 8

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: 2AUHL-U0633 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Antenna Information VBOX7 can only use antennas certificated as follows provided by manufacturer; Internal Antenna Identification Antenna type and Operate frequency Maximum antenna Identification in Internal photos antenna number band gain 2.4G/5G Wifi 2.4GHz – 2.4835GHz Antenna Dipole Antenna 5.00 dBi /5.8GWIFI 5GHz – 6 GHz 6. Conducted Power 6.1 Test Setup Block Diagram 6.2 Test Procedure 1) The EUT was directly connected to the power meter and antenna output port as show in the Block diagram; 2) Reading average power in RMS detector. 6.3 Measurement Equipment Item Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. 1 Power Meter R&S NRVS 100444 2019-06-11 2020-06-10 2 Power Sensor R&S NRV-Z32 10057 2019-06-11 2020-06-10 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 8

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: 2AUHL-U0633 [2.4GHz WLAN] Frequency Peak Conducted Output Power Mode Channel (MHz) (dBm) 1 2412 7.12 IEEE 802.11b 6 2437 6.43 11 2462 6.80 1 2412 10.85 IEEE 802.11g 6 2437 11.19 11 2462 10.52 1 2412 12.81 IEEE 802.11n HT20 6 2437 12.51 11 2462 12.00 3 2422 14.88 IEEE 802.11n HT40 6 2437 14.91 9 2452 14.27 [5.2G WLAN] Frequency Average Conducted Output Power Mode Channel (MHz) (dBm) 36 5180 10.38 IEEE 802.11a 40 5200 9.67 48 5240 8.34 36 5180 10.08 IEEE 802.11n HT20 40 5200 9.06 48 5240 8.05 38 5190 9.29 IEEE 802.11n HT40 46 5230 8.08 36 5180 9.82 IEEE 802.11ac VHT20 40 5200 9.11 48 5240 7.93 38 5190 9.54 IEEE 802.11ac VHT40 46 5230 8.02 IEEE 802.11ac VHT80 42 5210 8.44 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 8

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: 2AUHL-U0633 [5.8G WLAN] Maximum Average Mode Channel Frequency (MHz) Conducted (dBm) 149 5745 13.50 IEEE 802.11a 157 5785 12.90 165 5825 12.25 149 5745 13.39 IEEE 802.11n HT20 157 5785 12.81 165 5825 12.06 151 5755 13.60 IEEE 802.11n HT40 159 5795 12.27 149 5745 13.15 IEEE 802.11ac VHT20 157 5785 12.96 165 5825 12.22 151 5755 13.65 IEEE 802.11ac VHT40 159 5795 13.03 IEEE 802.11ac VHT80 155 5775 11.99 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 8

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: 2AUHL-U0633 7. Manufacturing Tolerance 2.4GHz WLAN IEEE 802.11b (Peak) Channel Channel 1 Channel 6 Channel 11 Target (dBm) 7.0 7.0 7.0 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11g (Peak) Channel Channel 1 Channel 6 Channel 11 Target (dBm) 11.0 11.0 11.0 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11n HT20 (Peak) Channel Channel 1 Channel 6 Channel 11 Target (dBm) 12.0 12.0 12.0 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11n HT40 (Peak) Channel Channel 3 Channel 6 Channel 9 Target (dBm) 15.0 15.0 15.0 Tolerance ± (dB) 1.0 1.0 1.0 5.2G WLAN IEEE 802.11a (Average) Channel Channel 36 Channel 40 Channel 48 Target (dBm) 10.0 10.0 9.0 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11n HT20 (Average) Channel Channel 36 Channel 40 Channel 48 Target (dBm) 9.0 9.0 9.0 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11n HT40 (Average) Channel Channel 38 Channel 46 Target (dBm) 9.0 9.0 Tolerance ± (dB) 1.0 1.0 IEEE 802.11ac VHT20 (Average) Channel Channel 36 Channel 40 Channel 48 Target (dBm) 9.0 9.0 8.0 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11ac VHT40 (Average) Channel Channel 38 Channel 46 Target (dBm) 9.0 8.0 Tolerance ± (dB) 1.0 1.0 IEEE 802.11ac VHT80 (Average) Channel Channel 42 Target (dBm) 9.0 Tolerance ± (dB) 1.0 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 6 of 8

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: 2AUHL-U0633 5.8 WLAN IEEE 802.11a (Average) Channel Channel 149 Channel 157 Channel 165 Target (dBm) 13.0 13.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11n HT20 (Average) Channel Channel 149 Channel 157 Channel 165 Target (dBm) 13.0 13.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11n HT40 (Average) Channel Channel 151 Channel 159 Target (dBm) 13.0 13.0 Tolerance ± (dB) 1.0 1.0 IEEE 802.11ac VHT20 (Average) Channel Channel 149 Channel 157 Channel 165 Target (dBm) 13.0 13.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11ac VHT40 (Average) Channel Channel 151 Channel 159 Target (dBm) 13.0 13.0 Tolerance ± (dB) 1.0 1.0 IEEE 802.11ac VHT80 (Average) Channel Channel 155 Target (dBm) 12.0 Tolerance ± (dB) 1.0 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 7 of 8

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: 2AUHL-U0633 8. Measurement Results 8.1 Standalone MPE As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna refer to antenna information, the RF power density can be obtained. List maximum power Output power Antenna Antenna MPE Duty MPE Modulation Type Gain Gain Limits dBm mW Cycle (mW/cm2) (dBi) (linear) (mW/cm2) IEEE 802.11b 7.12 1.3305 5.00 1.9953 100% 0.0032 1.0000 IEEE 802.11g 11.19 37.4973 5.00 1.9953 100% 0.0083 1.0000 IEEE 802.11n HT20 12.81 90.1571 5.00 1.9953 100% 0.0120 1.0000 IEEE 802.11n HT40 14.91 95.2796 5.00 1.9953 100% 0.0195 1.0000 IEEE 802.11ac VHT20 13.15 92.6830 5.00 1.9953 100% 0.0130 1.0000 IEEE 802.11ac VHT40 13.65 25.8226 5.00 1.9953 100% 0.0146 1.0000 IEEE 802.11ac VHT80 11.99 29.1072 5.00 1.9953 100% 0.0099 1.0000 Remark: 1. Output power (Average) including turn-up tolerance; 2. Output power was adjust to duty cycle at 100% if measured duty cycle less than 98%; 3. MPE evaluate distance is 20cm from user manual provide by manufacturer. 8.2 Simultaneous Transmission MPE The sample only support one WLAN modular and one antenna, no need consider simultaneous transmission; 9. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. ----------------THE END OF REPORT--------------- This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 8 of 8


Document Created: 2019-10-21 17:11:48
Document Modified: 2019-10-21 17:11:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC