18_FLY-X5(remote) RFExp r2

FCC ID: 2AUFZ-ZD6-1

RF Exposure Info

Download: PDF
FCCID_4446695

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE168647 Page: 1 of 3 RF Exposure Evaluation FCC ID: 2AUFZ-ZD6-1 1. Client Information Applicant : Shantou Fulaiying Toy Technology Co.,Ltd No.4, lane 1, Ronan Road, Toufen Village, Fengxiang Street, Chenghai Address : District, Shantou City, Guangdong Province, China Manufacturer : Shantou Fulaiying Toy Technology Co.,Ltd No.4, lane 1, Ronan Road, Toufen Village, Fengxiang Street, Chenghai Address : District, Shantou City, Guangdong Province, China 2. General Description of EUT EUT Name : Remote Control For Unmanned Aerial Vehicle FLY-X5, X54, X6HD, ZD6, ZD5, ZD6-GPS, ZD8, ZD8-GPS, Models No. : ZD9, X10MINI, GD-65A All these models are the same PCB, layout and electrical circuit, Model Difference : the only difference is change appearance, including in size and color Operation Frequency: 2405~2477 MHz Product Max. Out Power: 90.34dBuV/m (-4.91dBm)(0.3228mW) Description : Antenna Gain: FPC(2 dBi) Modulation Type: GFSK Power Supply DC power by AA battery. Power Rating DC 4*1.5V by AA Battery Software Version : N/A Hardware Version : N/A Connecting I/O : Please refer to the User's Manual Port(S) Note: More test information about the EUT please refer the RF Test Report. TB-RF-074-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE168647 Page: 2 of 3 Standard Requirement Portable Device According to §15.247(i) and §1.1307b(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. See KDB 447498 D01 General RF Exposure Guidance V6, section 4.3.1. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where ·f(GHz) is the RF channel transmit frequency in GHz ·Power and distance are rounded to the nearest mW and mm before calculation17 ·The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. TB-RF-074-1.0

Report No.: TB-MPE168647 Page: 3 of 3 Measurement Result: Test separation: 5mm Frequency Max Output Max Output Calculation Threshold (GHz) power (dBm) power (mW) Value (Note 1) Value 2.441 -4.91 0.3228 0.1008 3.0 Note: EIRP=E-104.8+20logD= 90.34 -104.8+20log3= -4.91dbm Note 1: Calculation Value =[(max. power of channel, mW)/(min.test separation distance, mm)] ꞏ[√f(GHz)]. Fox example: 0.3228/5*√2.441= 0.1008 ≤3.0 According to KDB447498 D01 V6, threshold at which no SAR required is ≤3.0 for 1-g SAR, separation distance is 5mm, and no simultaneous SAR measurement is required. Standard Applicable According to 2.1093 this is a portable device. According to KDB 447498 D01 V6, Appendix A SAR test exclusion thresholds for below table, the power level 10mW at 5mm. Measurement Result: This is a portable device and the Max. peak output power is -4.91dBm(0.3228mW) lower than low threshold 10mW at 5mm in general population category; The SAR measurement is not necessary. -----END OF REPORT----- TB-RF-074-1.0


Document Created: 2019-09-20 12:47:38
Document Modified: 2019-09-20 12:47:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC