User manual

FCC ID: 2AUF5-HW10H

Users Manual

Download: PDF
FCCID_4440654

Note: When testing, the interface icon will flash,and the heart rate clock, find smartband/smartwatch,find mobile phone, First, you need to turn on the notification function of social ensure the smooth upgrade process, you need to ensure with the watch. If Bluetooth pairing prompt appears, click Lenovo Limited Warranty and Notice Warranty period and type of Warranty service >>Know the product When fully charged,the battery icon will stop scrolling and Note: For mobile phone system minimum requirements, you need to use Android 5.0 or IOS 9.0 and above, Bluetooth 4.2 or >>Use the watch LED of the watch will flash at the same time; the sensor should be sedentary reminder,drink water reminder, dial push and other APP on the phone. that: Pair. After successful pairing, Bluetooth symbol will appear FCC Statement This device complies with Part 15 of the FCC Rules. Operation is the charging is full. Set smart reminder Service and Support information Product Type:Accessory Note: Before connecting the charging base to the USB port, make above. Android users should strictly follow the prompts of the close to the skin during testing to avoid external light affecting the functions.Please refer to the help documentation in the Android phone: confirm the phone and watch are normally ①Internet network of the phone is normal; in the lower right corner of the standby interface screen, and subject to the following two conditions: sure that any 2 pins on the charging base are not connected to "Lenovo Life" app and ensure that all permission requests for After successfully binding the watch, you can set the smart test accuracy; the skin in contact with the heart rate sensor should Lenovo Life app for more information. connected, and turn on the corresponding permissions in the ②The watch power is more than 50% ; Lenovo Life APP will automatically display the date and time, The following information describes the technical support that is Environmental,recycling,and disposal inrormation (1)This device may not cause harmful interference. conductive materials such as nails and iron. After fully charging, the "Lenovo Life" app are allowed. Otherwise, the operation of reminder function to be turned on or off on the APP side, and be kept clean, sweat or stain will affect the test result.Open the Note: The “Lenovo Life” app and smart hardware will continue to be Settings of the phone after connecting. Allow "Lenovo Life" ③Keep the distance of mobile phone and watch within 3 sports data, heart rate data on the APP function page available for your product,during the 1 year warrany period or thr General recycling statement (2)This device must accept any interference received, including the APP may be abnormal, resulting in a problem that the watch choose to open the required reminder function (call method of automatically measuring heart rate: Open the “Lenovo upgraded, bringing more new features and a more stable experience synchronously.If the data cannot be synchronized interference that may cause undesired operation. remove the charging cable from the USB port. APP to access calls, messages and contacts, and keep meters and do not do anything other than upgrade. oughout the life of your product. Refer to the Lenovo Limited Wa connection fails, Bluetooth cannot communicate, and so on.After reminder, SMS reminder, QQ, WeChat, Facebook, etc.) when Life” APP, the homepage enters the “Heart Rate” column,click the Lenovo encourages owners of information technology (IT) equipm 2. Changes or modifications not expressly approved by the party to users. "Lenovo Life" APP running in the phone background; If the 6. The watch has no heart rate data successfully after the above steps, uninstall Lenovo Life APP rranty for a full explanation of Lenovo warranty terms. See “Leno the installation is complete, the icon of Lenovo Life appears on [Settings] button in the upper right corner of the page to operate responsible for compliance could void the user’s authority to Touch display the mobile phone desktop. Click on the “Lenovo Life” app and receiving a call or information push, the watch Alert the the automatic measurement switch, and set the heart rate warning >> Notes phone is equipped with security software, please add Watch wear should not be too loose, try to make the back after ignoring HW10H in the Bluetooth setting of the system, vo Limited Warranty notice”later in this document for details on ent to Responsibly recycle their equipment when it is no longer nee operate the equipment. vibration and display the relevant information. 1. Please do not wear the watch to shower or swim; "Lenovo Life" APP as trust. of the watch close to the skin of the arm, and then switch and then download and install Lenovo Life APP again. In the accessing The full warranty. ded.Lenovo offers a variety of programs and services to assist equip follow the tips of the APP to complete the user registration and line value. Note:This equipment has been tested and found to comply with Operation steps: Open Lenovo Life → Profile → HW10H → 2. Please do not remove, repair or modify the watch, replace Apple phone: if there is no reminder after connection, it is to the heart rate test interface to manually test the heart process, make sure to click on allow various authorization ment Owners in recycling their IT products. permission.Android phone users please pop up the first time <Sports interface> Click on the display to enter the sport Telephone technical support the limits for a class B digital device,pursuant to Part 15 of the FCC Smart Reminder. the built-in battery, etc.; suggested to restart the phone to reconnect. When rate. Try to stay calm during the test for heart rate accuracy. applications initiated by the APP. Then go to step 3 above. Home Key when installing the "Lenovo Life" app,please allow the "Lenovo mode selection interface. There are 7 sports modes for you Important WEEE information Rules. These limits are designed to provide reasonable protection Mobile Services" program is approved for installation. This Note: This product default smart reminder is set to off, users should 3. Please use standard USB port to charge the watch; connecting to the watch again, you must wait for the phone If you need to turn on the automatic heart rate test function, You can get help and information from the Customer Support Ce against harmful interference in a residential installation. enable this function through the APP settings.First you need to turn to choose. Click to enter the sport mode selection interface. service mainly allows the "Lenovo Life" APP to run in the 4. Please do not place the watch in high temperature and to pop up “Bluetooth pairing request”, then click “Pairing” to please turn on the automatic heart rate measurement nter by telephone.Before contacting a Lenovo technical support This equipment generates uses and can radiate radio frequence on the status bar notification feature of your phone. After selecting the corresponding sport mode,swipe from background. It has prevented the Android Android system from humidity for a long time; At the same time very low receive reminder. through the setting function of heart rate option on the representative，please have the following information available: energy and,if not installed and used in accordance with the bottom to top to pause, exit, and return to the current sport forcibly terminating the operation of the "Lenovo Life" APP <Home Interface> Display time information and basic motion model and serial number，the exact wording of any error messa instructions,may cause harmful interference to radio Magnetic charging base mode.Slide the display area of the motion interface to the temperature may have influences for the band function; 3. Does the Bluetooth connection need to be opened all the main interface of "Lenovo Life" APP. Electrical and electronic equipment marked with the s Lenovo Smart Watch >>Button description Home button: Long press to turn on the phone. When the Step 2: Power on and wear when you use the watch normally, causing the watch to be disconnected from the "Lenovo Life" APP and cannot be transmitted data. information and target achievement. Press and hold for about 2 seconds to enter the dial selection interface. There are three left to enter the next screen. <Weather Interface> This screen displays the weather 5. When the watch is wet, please wipe it dry with a soft cloth before charging, otherwise it will corrode the charging time? Is there data left after disconnection? Data is retained locally on the watch before synchronizing 7. Unable to connect the watch to the phone Following the right steps is the key to a successful ge,and a description of the problem. Your technical support repr esentative might want to walk you through the problem while yo ym bol of a crossed-Out wheeled bin may not be dispo sed as unsorted municipal waste. Waste of electrical communications.However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which dial styles for you to choose. Slide left in the display area to u are at your device during the call. HW10H Press and hold the power button for about 3 seconds to turn conditions of the day.After connecting the “Lenovo Life” contact point and lead to charging failure; data. When the Bluetooth connection between phone and connection. If you are unable to connect, read carefully and and electronic equipment (WEEE)shall be treated sepa can be determined by turning the equipment off and on,the user is watch is in the secondary interface, short press to return to Step 4: Connect the band with phone to go to the next one. 6. If you have sensitive skin or wear the band too tight, you follow these steps. the main interface; when in the third level interface, short the watch on. Put your watch on your wrist and lock the app, it will update the weather conditions of the day and watch is successful, the watch data will be automatically Worldwide Lenovo Support Telephone list rately Using the collection framework available to custo encouraged to try to correct the interference by one or more of synchronize information <Step Counting Interface> Display the cumulative amount of may feel uncomfortable; Step 1: Please confirm whether the watch has Bluetooth strap buckle in place. For the accuracy of the heart rate test the next two days.Slide left in the display area to go to the uploaded to the "Lenovo Life" APP. Generally, the watch can mers for the reurn,Recycling,and treatment of WEEE. the following measures: User Manual press will return to the previous interface. TConnect your smart watch to your smartphone properly, steps in real time on the day; long press on this interface to Important:Service Contact list are subject to change without data, keep the sensor close to the skin to avoid movement next screen. 7. If used regularly, recommend to clean the watch every keep the data for three days. Please timely synchronize the symbol first, the dial interface will display (long press for 2 • Reorient or relocate the receiving antenna. Touch display: After power on, slide left and right to switch make sure your phone's Bluetooth is turned on. After view the mileage and calorie consumption converted by the notice.The most up to date Service contact list is always available and light leakage. <Music Control Interface> Control the mobile phone music week. Wipe it with a damp cloth and remove grease or dust data to the "Lenovo Life" APP for backup seconds in the standby interface). If yes, please turn on your • Increase the separation between the equipment and receiver. between the interfaces. Single point and slide up and down opening the “Lenovo Life” APP login successfully → Set current step.The time of a day is defined as 24 hours at http:// support. Lenovo.com • Connect the equipment into an autlet on a circuit different from player to perform the previous, next, play, pause, etc. actions with a mild soap 4. If you need to stop using this watch on this phone, please smartphone's system Settings -Bluetooth-HW10H and click Service call :+86 400-6506-635 to turn the corresponding function on or off. Step 3: Download and install the smartphone app personal information → Click “Add Device” → Smart between 0:00 am and 0:00 am on the next day; the 8. The test data obtained by using this product is for the right button of HW10H and choose ignore. The that to which the receiver is connectec. Note: the screen can be lit up by raising your hand and sliding from while connected to the APP. Slide left in the display area to remove the binding relationship between the watch and the If the telephone number for your country or region is not listed Co Watch → Search for device name “HW10H” in “Profile” to cumulative number of steps during this 24-hour period will reference only. The test data are affected by many factors Bluetooth icon in the watch will disappear. Then go to step FCC ID: 2AUF5-HW10H • Consult the dealer or an experienced radio/TV technician for left to right under the display screen in the off screen state. go to the next screen. phone. ntact your Lenovo reseller or Lenovo marketing representative. help. bind. After the binding is successful, the app will be cleared at the next 0. Slide left in the display area to go and the test results may be different under different two. <Other function interface> Click this interface to enter more ① Open the "Lenovo Life" APP on the phone → in [Profile] → >>Start to use automatically synchronize the date, including the number to the next screen. rich functions: stopwatch, mute switch, photo control, conditions. Such as professional athletes, pregnant women, click HW10H→ unbind. If there is no Bluetooth symbol display: firstly, make sure the Warranty information The device has been evaluated to meet general RF exposure Check the product intact before using,peel off the protective of steps, distance, calorie consumption, sleep, heart rate <Sleep interface> Record the sleep time and sleep quality of and a few people with special physical conditions, the test Bluetooth of the phone is turned on (if any questions, please Lenovo Limited Warranty notice requirement. The devicecan be used in portable exposure condition brightness adjustment, factory reset, shutdown, etc. Click ② For Apple phone, in addition to the first step, but also without restriction. film on the screen and the bottom heart rate sensor. and other data on the watch. When the watch is the night, and press the touch to enter the next interface. data may have deviation. consult your smartphone manufacturer for the way to turn on This product is covered by the terms of the Lenovo Limited Warr “Home” to return to the previous menu.Slide left in the need to open the phone Bluetooth → click "HW10H" right connected to the mobile phone Bluetooth, the effective <Heart Rate Measurement> Click on the display to make a the Bluetooth of the phone). anty,Version L505-0010-02 08/2011. Read the Lenovo Limited W Step 1: Charge the watch display area to enter the main interface. FAQ button → ignore this device. RED DoC interaction distance of data transmission is within 10 heart rate measurement. Keep it calm when measuring.You Secondly, make sure you download and successfully install arranty (LLW)at http://www.lenovo.com/warranty/llw_02. You For the first time, remove the watch and charge the device Lenovo Life <More rich features> This product can be combined with the 1. How to charge the device? 5. How to upgrade the watch through OTA? meters. can also use the “Lenovo Life” app to set the heart rate Lenovo Life app on your smartphone. can view the LLW in a number of languages from this web site. If Decoration of Conformity: with the corresponding charging stand as picture below,insert supporting Lenovo Life APP software to achieve more rich This device uses contact charging, you just need to put the “Lenovo life” will remind you when a new version needs to be Please use the smartphone to scan the QR code, or open Note: When the Apple mobile phone connection watch is bound measurement automatically, and the heart rate measurement Thirdly, open Lenovo Life on the smart phone, click Profile -> you cannot view the LLW either form the Web site or from your “Hereby, Shenzhen Enjoy Technology Co.,Ltd, declares that this the other end of the charging cable into the charging stand. functions, such as: sleep, walking mileage, activity time device on the charging base correctly, and use 5V/1A power upgraded. Follow the instructions of "Lenovo Life" APP and the Google play store or Apple Store to search for the to the "Lenovo Life" app, you also need to click the Bluetooth function is automatically turned on every 5 minutes in the Add device -> Smart Watch ->HW10H. After searching device,contact your local Lenovo office or reseller to obtain a prin HW10H is in compliance with the essential requirements and other Connect the 5V output adapter or computer jack.When pairing request. statistics, calorie consumption statistics, automatic supply. Computer USB interface and adapter can support. complete OTA upgrade step by step. After the upgrade, “Lenovo Life” app for download and installation. automatic mode.Slide left in the display area to go to the HW10H smart watch, the phone will successfully connect ted version of the LLW. Note:Please take the purchase evidence relevant provisions of 2014/53/EU. charging, the battery icon on the watch screen will flash. synchronization of time and date, motion track, set alarm 2. Can’t receive the reminder after turning on reminder manually start the watch, and OTA upgrade is completed. To next screen. with you when you claim the service. The full text of the EU declaration of conformity is available at the function ? following internet address:support. Lenovo.com”


Document Created: 2019-09-11 11:45:15
Document Modified: 2019-09-11 11:45:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC