18_TV-618ZD-2MP RFExp

FCC ID: 2ATUJ-TV618ZD2MP

RF Exposure Info

Download: PDF
FCCID_4377732

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE166896 Page: 1 of 4 Maximum Permissible Exposure Evaluation FCC ID: 2ATUJ-TV618ZD2MP 1. Client Information Applicant : Shenzhen Trisvision Technology Co.,Ltd. Chuangzeshi Science Park, 81 Xincun, Songyuanxia Community Address : Center, Guanhu Street, Longhua District, Shenzhen, China Manufacturer : Shenzhen Trisvision Technology Co.,Ltd. Chuangzeshi Science Park, 81 Xincun, Songyuanxia Community Address : Center, Guanhu Street, Longhua District, Shenzhen, China 2. General Description of EUT EUT Name : IP Camera Models No. : TV-618ZD-2MP, see NOTE(1) All models are in the same PCB layout interior structure and Model Different : electrical circuits, The only difference is model name for commercial purpose. Operation 802.11b/g/n(HT20): 2412MHz~2462MHz Frequency: 802.11n(HT40): 2422MHz~2452MHz RF Output Power: 802.11b: 16.90dBm 802.11g: 15.63dBm Product 802.11n (HT20): 14.91dBm : 802.11n (HT40):14.08dBm Description Antenna Gain: 5dBi FPC Antenna Modulation Type: 802.11b: DSSS(CCK, DQPSK, DBPSK) 802.11g/n: OFDM(BPSK,QPSK,16QAM, 64QAM) Power Supply : DC Voltage by AC/DC Adapter supplied(model:SAN-05015) Power Rating : Input: DC 5V1.5A Software Version : V3.4.1.1212 Hardware Version : BK-38-2.0-V1 TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE166896 Page: 2 of 4 Connecting I/O : Please refer to the User's Manual Port(S) NOTE: (1) Model(s) Series Model No. TV-982-2MP, TV-962-2MP, TV-622-2MP, TV-6024H-2MP, TV-6025H-2MP, TV-6026H-2MP, TV-6124H-2MP, TV-228ZD-2MP, TV-308ZD-2MP, TV-266ZD-2MP, TV-268ZD-2MP, TV-288ZD-2MP, TV-298ZD-2MP, TV-238ZD-2MP, TV-218ZD-2MP, TV-9825A-2MP, TV-9825B-2MP, TV-K520-2MP-AJ, TV-K530-2MP-AJ, TV-Q2-2MP-AJ TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE166896 Page: 3 of 4 MPE Calculations for WIFI 1. Antenna Gain: FPC Antenna: 5dBi. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Conducted Max tune up Power Turn-up ANT Gain Distance Density Power(max) power Mode Power (dBi) (cm) 2 (dBm) (dBm) (mW/ cm ) (dB) [G] [R] [P] [S] 802.11b 16.90 17±1 18 5 20 0.03970 802.11g 15.63 15±1 16 5 20 0.02505 802.11n 14.91 15±1 16 5 20 0.02505 (HT20) 802.11n 14.08 14±1 15 5 20 0.01989 (HT40) TB-RF-075-1.0

Report No.: TB-MPE166896 Page: 4 of 4 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For 802.11b/g/n:2412~2462 MHz MPE limit S: 1mW/ cm2 The MPE is calculated as 0.03970mW / cm2 < limit 1mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-075-1.0


Document Created: 2019-07-04 13:37:26
Document Modified: 2019-07-04 13:37:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC