User manual

FCC ID: 2ATT9TQ1007

Users Manual

Download: PDF
FCCID_4355515

Safety Precautions Technical Specifications Action Description Bluetooth Pairing Step 1 Bluetooth Pairing Step 2 Right-Click on the computer screen, select”Search Device”, then FCC Statement: the headphone must be in the pairing mode (red and blue lights This equipment has been tested and found to comply with the limits for a flash alternately), then the device will search all nearby bluetooth Class B digital device, pursuant to part 15 of the FCC Rules. These limits are Bluetooth parameters 1. Turn on bluetooth headset and mobile phone (or other Pairing 2: one for two functions (to connect two bluetooth devices designed to provide reasonable protection against harmful interference in a For the correct and safe use of this headset, please read before use Read this manual, and Power: Off: Press the pause button switch connected devices) to a distance in the range of meter, the devices simultaneously) residential installation. This equipment generates, uses and can radiate radio keep it. Bluetooth version: Bluetooth V5.0 Double-click the computer search to the EK-MH1 bluetooth frequency energy and, if not installed and used in accordance with the closer the better. 1. Make sure the headset headset is successfully connected earphone instructions, may cause harmful interference to radio communications. Support Agreement: A2DP, AVGCP, HSP, HFP Pairing mode: The first time you open the device it 2. The headset is on and confirm that pairing state, then red the first mobile phone (in the connection status) However, there is no guarantee that interference will not occur in a particular Before using this headphone, should pay attention to the following points Frequency: 2.400GHz-2.480GHz automatically enters into mode (or press and hold the and blue lights flashing altemately. 2. The headset press the headset multifunction button to re- Right-click on the EK-MH1 and select”Bluetooth Hight Quality installation. If this equipment does cause harmful interference to radio or 3. For pairing, turn on the user’s mobile phone bluetooth Audio” television reception, which can be determined by turning the equipment off Operating Range: Up to 10 meters (unobstructed space) multifunction key to enter the pairing mode) enter pairing status, select EK-MH1 headset into pairing and and on, the user is encouraged to try to correct the interference by one or more function (or other bluetooth devices). connection is successful (refer match Step 1 of the method) Now you bluetooth headphone has successfully connected to a of the following measures: Talk time: Up to 3-5 hours Answer / Hang up: Click the multifunction key to achieve And search or scan then the phone will search for nearby computer, PCs can now listen to music. • Reorient or relocate the receiving antenna. 3. And then opens the first bluetooth-enabled mobile phone, 1. Requests the reasonable control of the volume and time Music time: Up to 4.5 hours, 80% volume incoming calls and hang up bluetooth devices, tap the search to the headset name: the existing connection memory, the EK-MH1 headphone tap • Increase the separation between the equipment and receiver. Instructions- when using headphones. Frequently Asked Questions: • Connect the equipment into an outlet on a circuit different from that to EK-MH1 into the connection, the connection is successful, then the Standby time: Up to 150 hours 1. What can I do when the bluetooth headphone does not pair which the receiver is connected. 2. Do not use the headset in potentially hazardous Last Number Redial: Double-click the multifunction key to Headset instructions lights tumed blue and flashing, indicating headphone is connected to two mobile phones simultaneously. • Consult the dealer or an experienced radio/TV technician for help. Charging standard: Micro USB, DC5V, 250mA with the phone? environments, to ensure safety. open the last number dialed a successful connection. Then you can listening to music with A: Check the headphone is in pairing mode or back to even. And check the phone bluetooth search function, whether it is Caution: Any changes or modifications to this device not explicitly approved Charging time: about 2 hours the connected device. User Manual 3. Avoid using headphones to listen to music while driving, Voice dialing (need phone support): Double-click the volume Step PC connection turn on and check the bluetooth menu on the device and by manufacturer could void your authority to operate this equipment. down button to turn on the delete/cancel the headphone according to the instructions make or answering the call, may cause dangers. Working environment: -10 to 50℃ reconnect. Tips: 2. Why does the bluetooth headphone cannot start? This device complies with part 15 of the FCC Rules. Operation is subject to 4. Set the headphone in a place where children can not Loudness Frequency: 20Hz-22KHz First, download and install a generic bluetooth driver A:Check headphone power the following two conditions: (1) This device may not cause harmful Phone voice dialing software 3. Bluetooth headphone can replace the battery? reachit. Avoid children from any improper use. 1. After the phone has been successfully paired, in the headset interference, and (2) this device must accept any interference received, A: No, this headphone in not using a removable lithium including interference that may cause undesired operation. will sutomatically be connected in next usage. After successfully installed, your computer will have a gray polymer battary. 5. Do not immerse headphone to water. Lights Up / Down song: Click side buttons for the cut songs lower right comer small icons 4. Can I use a bluetooth headphone while driving? 2. Some phone after paining connection must manually select A: It is not recommended. 6. Continue increasing the volume should be a voided. To the headset service funtions. The phone bluetooth version is Then plug in the bluetooth adapter, then in the lower right 5. Why does the bluetooth headphone and the phone are Volume up / down small: Press the side volume by about two comer of the computer blue icon blue. Note: The laptop disconnected at 10 meters? protect your ear, please transfer to the suitable volume. 2.1 or later, when paired, no pairing code in requested. A: Because bluetooth is a wireless technology and has a Pairing state: red and blue lights flashing alternately fast seconds to realize big / small has no bluetooth distance limitation. 3. Bluetooth headset pairing time up to 240 seconds, beyond 7. When using the headset feels as obvious discomfort, Music status: slow flashing blue light It requires an external bluetooth adapter (not included) 6. After the headphone are connected to a commputer or mobile irnitation or other unwell reactions immediately stop using it. this time will quit pairing status, if you are still not successfully phone, why I can not hear the sound? Voice calls: answer YES, refused to NO, note (on the Caller ID A:Check whether the computer output channel is set to Charge status: a long red light pairing again repeat the above steps. Right-click, select”Show Classic Interface” bluetooth audio devices and your computers bluetooth Bluetooth Headphone 8. Avoid storing or using the headphones at a temperature Charging complete: red lights or long bright blue light after the broadcast will open voice) 4. Headset will automatically shut down after the unconnected whether to support the A2DP protocol. And check the lower than-15℃(5°F) or higher than 55℃(131°F) exceed 10 minutes. Turn off the bluetooth earphone, press and hold the computer/phone volume. environment, otherwise will shorten the headphone or multifunction key until red and blue lights flash alternately 7. When bluetooth headphone are connected to your phone, you Low power status: red light and accompanied by a tone 5. Headset built three kinds of sound effects can be switched. can use the neaaser to control applications on the phone it? brattery life. (the match), then enter the earphone is search status. A: The device application software is set or varies, so indivedual applications are not supported to be contolled by the headphone.


Document Created: 2019-07-10 16:56:28
Document Modified: 2019-07-10 16:56:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC