User manual 2

FCC ID: 2ATSQZK901A

Users Manual

Download: PDF
FCCID_4380131

Product maintenance Cleaning of rolling brush Cleaning of side brush 1.Turn the machine and press the buckle on the rolling 1. Turn the machine, lift the left and right brushes up and pull brush cover from both ends to remove the rolling brush. them out. 2. Clean the windings on the left and right brushes and their Rolling brush cover bearings. 3. Align the side brush with its bearing on the machine and Buckle press firmly to install the left and right brushes. Rolling brush Rolling brush slot Side brush 2.Clean the windings on the rolling brush with the matching cleaning brush. After cleaning, install the rolling brush and fasten the cover. *It is recommended to clean the side brush regularly; *If the side brush is damaged, please pull out the damaged side brush directly, and align the new side brush with its bearing and press firmly. * It is recommended to clean the rolling brush regularly and replace it timely as the wear situation. 10


Document Created: 2019-07-31 16:15:33
Document Modified: 2019-07-31 16:15:33
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC