14_HYP10 TestRpt DTS-WiFi p2

FCC ID: 2ATSO-HYP10

Test Report

Download: PDF
FCCID_4405871

® GC Report No.:AGCO3576190601FEO4 Page 30 of 61 Test Graph 11b—LCH 11b—MCH (Z tervght ostum itc« Srst sn [Z rervant rsum Anaizn Srgt se vrsone Marker 1 2412994149854 2 ic BR vigcreence Assin: 30 4B Ave Type: s AmHm')mmm ippoprerrericreseeii —.0... EGuinte * Anen: 30 dt Socicue Avg Type: RMS Mkr1 2.412 994 1 GHz Next Peak Mkr1 2.436 226 4 GHz NextPeak Ref 20.00 dBm UOdoccy Pm seo Ed |=lud Next PK Right Next PK Right Next Pk Left Next PLeft Marker Delta Marker Delta Mir—RefLyl Mikr—RefLvl Eocesd Doi sn o ce sc Doi sn old udLs Sweep 93.33 ms (40000 pts) #Res BW 20 kHz Cls OdbASoncdns 11b—HCH 11g—LCH 2 Reright Socivm natnr~ Surpe tA [Z) Kepight Spectomen Surge SA . Marker 1 2458991299782 _ yaran — Ave Type: ns es Marker 1 2.415743718593 yara— Avg Type: RMS cteciin as C3 tain Atien: 30 a ee Atten: 30 t Mkr1 2.458 991 3 GHz Next Peak Mkr1 2415 743 7 GHz NextPeak Ref 20.00 dBm DeEaECd yyen —7.896 dBm Next PKRight Next PRight Next Pi Left Next Pic Left Marker Detta Marker Delta Mkr—CF Mkr—CF Micr—RefLvl Mkr—RefLul Elcess Span 30.00 MHz Center 241200 GHz Span 30.00 MHz Cld LLs Sweep 93.33 ms (40000 pts) Lodedls Lln Sweep 93.33 ms (40000 pts) 11g—MCH 11g—HCH mm enz es e e5 Trig: FreeRun Ave Type: Ams AvaiHola>1o0rt00 C Iermerrmraceeel ...... lc Avg Type: RMS Sonio Auen: 30 aB IFGaintow Acten: 30 dB Mkr1 2.432 621 0 GHz tss Mkr1 2.458 250 3 GHz NextPeak —7.535 dBm m ce ~4.258 dBm Next PK Right Next PK Right Next Pk Left Next PLeft Marker Delta Marker Delta Mkr—CF Mkr—CF Micr—RefLvl Mkr—RefLul lceasd Span 30.00 MHz Eocencauca Span 30.00 MHz Cld LLs Sweep 93.33 ms (40000 pts) Lodedls Lln Sweep 93.33 ms (40000 pts) Attestation of Global Compliance(Shenzhen)Co.,Ltd. Add: 2/F., Building 2, No.1—4, Chaxi Sanwei Technial Industrial Park, Gushu, Xixiang, Bac‘an District, Shenzhen, Guangdong, China Tel: +86—755 2523 4088 E—mail: agc@ageo—cert.com Service Hotline:400 089 2118

Report No.:AGC03576190601FE04 Page 31 of 61 11nHT20-LCH 11nHT20-MCH 11nHT20-HCH 11nHT40-LCH 11nHT40-MCH 11nHT40-HCH

Report No.:AGC03576190601FE04 Page 32 of 61 11. RADIATED EMISSION 11.1. MEASUREMENT PROCEDURE 1. The EUT was placed on the top of the turntable 0.8 or 1.5 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. For emissions above 1GHz, use 1MHz VBW and RBW for peak reading. Then 1MHz RBW and 10Hz VBW for average reading in spectrum analyzer. Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. 7. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum values. 8.If the emissions level of the EUT in peak mode was 3 dB lower than the average limit specified, then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions which do not have 3 dB margin will be repeated one by one using the quasi-peak method for below 1GHz. 9. For testing above 1GHz, the emissions level of the EUT in peak mode was lower than average limit (that means the emissions level in peak mode also complies with the limit in average mode), then testing will be stopped and peak values of EUT will be reported, otherwise, the emissions will be measured in average mode again and reported. 10. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. High - Low scan is not required in this case.

Report No.:AGC03576190601FE04 Page 33 of 61 11.2. TEST SETUP Radiated Emission Test-Setup Frequency Below 30MHz RADIATED EMISSION TEST SETUP 30MHz-1000MHz RADIATED EMISSION TEST SETUP ABOVE 1000MHz

Report No.:AGC03576190601FE04 Page 34 of 61 11.3. LIMITS AND MEASUREMENT RESULT 15.209(a) Limit in the below table has to be followed Frequencies Field Strength Measurement Distance (MHz) (micorvolts/meter) (meters) 0.009~0.490 2400/F(KHz) 300 0.490~1.705 24000/F(KHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 Note: All modes were tested For restricted band radiated emission, the test records reported below are the worst result compared to other modes.

Report No.:AGC03576190601FE04 Page 35 of 61 11.4. TEST RESULT RADIATED EMISSION BELOW 30MHZ No emission found between lowest internal used/generated frequencies to 30MHz. RADIATED EMISSION BELOW 1GHZ RADIATED EMISSION TEST- (30MHZ-1GHZ) -HORIZONTAL RESULT: PASS

Report No.:AGC03576190601FE04 Page 36 of 61 RADIATED EMISSION TEST- (30MHZ-1GHZ) -VERTICAL RESULT: PASS Note: 1. Factor=Antenna Factor + Cable loss, Margin= Result -Limit. 2. The “Factor” value can be calculated automatically by software of measurement system. 3. All test modes had been pre-tested. The 802.11b at low channel is the worst case and recorded in the report.

Report No.:AGC03576190601FE04 Page 37 of 61 RADIATED EMISSION ABOVE 1GHZ Frequency Emission Level Limits Margin Detector Comment (MHz) (dBμV/m) (dBμV/m) (dB) Type TX 11b 2412MHz 4824 49.17 74 -24.83 Pk Horizontal 4824 35.55 54 -18.45 AV Horizontal 7236 50.45 74 -23.55 pk Horizontal 7236 34.51 54 -19.49 AV Horizontal 4824 50.26 74 -23.74 Pk Vertical 4824 34.77 54 -19.23 AV Vertical 7236 50.50 74 -23.5 Pk Vertical 7236 38.60 54 -15.40 AV Vertical TX 11b 2437MHz 4874 50.16 74 -23.84 Pk Horizontal 4874 31.95 54 -22.05 AV Horizontal 7311 46.63 74 -27.37 Pk Horizontal 7311 34.88 54 -19.12 AV Horizontal 4874 49.48 74 -24.52 Pk Vertical 4874 40.45 54 -13.55 AV Vertical 7311 47.72 74 -26.28 Pk Vertical 7311 37.80 54 -16.20 AV Vertical TX 11b 2462MHz 4924 50.32 74 -23.68 Pk Horizontal 4924 33.72 54 -20.28 AV Horizontal 7386 48.73 74 -25.27 Pk Horizontal 7386 38.89 54 -15.11 AV Horizontal 4924 50.15 74 -23.85 Pk Vertical 4924 38.49 54 -15.51 AV Vertical 7386 48.62 74 -25.38 Pk Vertical 7386 36.50 54 -17.50 AV Vertical RESULT: PASS Note: 1. Margin = Emission Level - Limit 2.1GHz-25GHz(All test modes had been pre-tested. The 802.11b mode is the worst case and recorded in the report. No recording in the test report at least have 20dB margin).

Report No.:AGC03576190601FE04 Page 38 of 61 12. BAND EDGE EMISSION 12.1. MEASUREMENT PROCEDURE 1)Radiated restricted band edge measurements The radiated restricted band edge measurements are measured with an EMI test receiver connected to the receive antenna while the EUT is transmitting 2)Conducted Emissions at the bang edge a)The transmitter output was connected to the spectrum analyzer b)Set RBW=100kHz,VBW=300kHz c)Suitable frequency span including 100kHz bandwidth from band edge 12.2. TEST SET-UP Radiated same as 11.2 Note: 1. Factor=Antenna Factor + Cable loss - Amplifier gain. Field Strength=Factor + Reading level 2. The factor had been edited in the “Input Correction” of the Spectrum Analyzer. So the Amplitude of test plots is equal to Reading level plus the Factor in dB. Use the A dB(μV) to represent the Amplitude. Use the F dB(μV/m) to represent the Field Strength. So A=F.

Report No.:AGC03576190601FE04 Page 39 of 61 12.3. TEST RESULT EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11b with data rate 1 Test Mode Antenna Horizontal 2412MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 40 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11b with data rate 1 Test Mode Antenna Vertical 2412MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 41 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11b with data rate 1 Test Mode Antenna Horizontal 2462MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 42 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11b with data rate 1 Test Mode Antenna Vertical 2462MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 43 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11g with data rate 6 Test Mode Antenna Horizontal 2412MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 44 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11g with data rate 6 Test Mode Antenna Vertical 2412MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 45 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11g with data rate 6 Test Mode Antenna Horizontal 2462MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 46 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11g with data rate 6 Test Mode Antenna Vertical 2462MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 47 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11n 20 with data rate 6.5 Test Mode Antenna Horizontal 2412MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 48 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11n 20 with data rate 6.5 Test Mode Antenna Vertical 2412MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 49 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11n 20 with data rate 6.5 Test Mode Antenna Horizontal 2462MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 50 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11n 20 with data rate 6.5 Test Mode Antenna Vertical 2462MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 51 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11n 40 with data rate 13.5 Test Mode Antenna Horizontal 2422MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 52 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11n 40 with data rate 13.5 Test Mode Antenna Vertical 2422MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 53 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11n 40with data rate 13.5 Test Mode Antenna Horizontal 2452MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 54 of 61 EUT Portable Translator Model Name HYP10 Temperature 25°C Relative Humidity 55.4% Pressure 960hPa Test Voltage Normal Voltage 802.11n 40 with data rate 13.5 Test Mode Antenna Vertical 2452MHZ PK AV RESULT: PASS

Report No.:AGC03576190601FE04 Page 55 of 61 13. FCC LINE CONDUCTED EMISSION TEST 13.1. LIMITS OF LINE CONDUCTED EMISSION TEST Maximum RF Line Voltage Frequency Q.P.( dBuV) Average( dBuV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 13.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST EUT & Support Units

Report No.:AGC03576190601FE04 Page 56 of 61 13.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipments received AC120V/60Hz power from a LISN, if any. 5. The EUT received charging voltage by adapter which received 120V/60Hzpower by a LISN.. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing.

Report No.:AGC03576190601FE04 Page 57 of 61 13.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less –2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 3. The test data of the worst case condition(s) was reported on the Summary Data page.

Report No.:AGC03576190601FE04 Page 58 of 61 13.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST LINE CONDUCTED EMISSION TEST LINE 1-L

Report No.:AGC03576190601FE04 Page 59 of 61 Line Conducted Emission Test Line 2-N

Report No.:AGC03576190601FE04 Page 60 of 61 APPENDIX A: PHOTOGRAPHS OF TEST SETUP LINE CONDUCTED EMISSION TEST SETUP RADIATED EMISSION TEST SETUP

Report No.:AGC03576190601FE04 Page 61 of 61 RADIATED EMISSION ABOVE 1G TEST SETUP ----END OF REPORT----


Document Created: 2019-08-17 10:16:21
Document Modified: 2019-08-17 10:16:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC