modular approval letter

FCC ID: 2ATPOESP-12L

Cover Letter(s)

Download: PDF
FCCID_4329219

Shenzhen Ai-Thinker Technology Co., Ltd Modular Transmitter Approval Request Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD21046 Company name: Shenzhen Ai-Thinker Technology Co., Ltd FCC ID: 2ATPOESP-12L Model No.: ESP-12L Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘ Module Certification Guide v01r04’. FCC ID: 2ATPOESP-12L has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee ‘Modular Certification Guide v01r04 (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry Yes, the products have a shield, Physical shielded. Physical components and tuning capacitor(s) may be components and tuning capacitor(s) are located external to the shield, but must be on the module assembly to the module and located assembly internal to the shield. The module must have buffered modulation/data inputs to ensure Yes, The module has buffered that the device will comply with Part 15 requirements with any modulation/data inputs. type of input signal Yes, The modular transmitter has its own The module must contain power supply regulation on the module power supply regulation. The module must contain a permanently attached antenna, or Yes, The module contains a permanently contain a unique antenna connector, and be marketed and attached PCB antenna. operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) The module must demonstrate compliance in a stand-alone Yes, The module compliance in a stand- configuration alone configuration. Yes. The module has its permanently The module must be labeled with its permanently affixed FCC ID affixed FCC ID label and the FCC ID label label, or use an electronic display (See KDB Publication 784748 is laser engraved on the shield. about labeling requirements) The module complies with all specific rules The module must comply with all specific rules applicable to the applicable to the transmitter. transmitter including all the conditions provided in the integration instructions by the grantee Yes. We provided an MPE report to show the module comply with RF exposure The module must comply with RF exposure requirements requirements. FCC – Modular Approval Request Rev 2.0

Shenzhen Ai-Thinker Technology Co., Ltd Name: facheng su Date: Jun. 20. 2019 Title: Manager Signature of applicant : FCC – Modular Approval Request Rev 2.0


Document Created: 2019-06-20 17:33:20
Document Modified: 2019-06-20 17:33:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC