MPE Part 15 Report

FCC ID: 2ATKL-SL2-1

RF Exposure Info

Download: PDF
FCCID_4471312

Applicant: Myriota Pty Ltd FCC ID: 2ATKL-SL2-1 45461518-R1.0 Test Report S/N: ISED ID 25148-SL21 45461523-R1.0 EXHIBIT 8A – FCC MPE PART 15 See Attached Transmitters do not simultaneously transmit ©2019 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 13 of 40

Prediction of MPE Limit 47 CFR § 2.1091/ § 2.1093 √ PAGN PAGN PAGN S20 = 2 SC = 2 RC = 4πR 20 4πR C 4π SL f SL = (mW/cm2) 1500 S20 = Power Density of the Device at 20cm SL = Power Density Limit SC = Power Density of the Device at the Compliance Distance RC R20 = 20cm Rc = Minimum Distance to the Radiating Element to Meet Compliance PT = Power Input to Antenna PA = Adjust Power GN = Numeric Gain of the Antenna f= Transmit Frequency Transmit Duty Cycle = 100% Use Group = General Popuation Transmit Duty Cycle: 100.00 (%) Tx Frequency (f): 433.50 (MHz) RF Power at Antenna Input Port (PT): 11.00 (mW) Antenna Gain: -2.50 (dBi) Numeric Antenna Gain (GN): 0.56 (numeric) Cable or Other Loss: 0.00 (dB) Duty Cycle/Loss Adjusted Power (PA): 11.00 (mW) SL = 0.289 (mW/cm2) S20 at 20cm = 0.001 (mW/cm2) RC = 1.3 (cm) SC = 0.29 (mW/cm2) RESULT PASS Art Voss Senior Engineer Celltech Labs Inc.


Document Created: 2019-08-30 08:23:47
Document Modified: 2019-08-30 08:23:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC