Test Report

FCC ID: 2ATHKES005

Test Report

Download: PDF
FCCID_4362439

FCC PART 15.231 TEST REPORT For ETROG SYSTEMS LTD. 124 Hertzel street, Jerusalem, Israel FCC ID: 2ATHKES005 Report Type: Product Type: Original Report Medical Alert Sy stem Report Number: RSZ190606002-00B Report Date: 2019-07-16 Simon Wang Reviewed By: RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”. The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 MEASUREMENT UNCERTAINTY ....................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 JUSTIFICATION .............................................................................................................................................................5 SPECIAL ACCESSORIES .................................................................................................................................................5 EQUIPMENT MODIFICATIONS .......................................................................................................................................5 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................5 EXTERNAL I/O CABLE..................................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................6 SUMMARY OF TEST RESULTS ...............................................................................................................................7 TEST EQUIPMENT LIST AND DETAILS ...............................................................................................................8 FCC §15.203 - ANTENNA REQUIREMENT.............................................................................................................9 APPLICABLE STANDARD ..............................................................................................................................................9 ANTENNA CONNECTOR CONSTRUCTION ......................................................................................................................9 FCC §15.207 (A) – AC LINE CONDUCTED EMISSIONS ....................................................................................10 APPLICABLE STANDARD ............................................................................................................................................10 EUT SETUP ................................................................................................................................................................10 EMI TEST RECEIVER SETUP .......................................................................................................................................10 TEST PROCEDURE ......................................................................................................................................................10 CORRECTED FACTOR & MARGIN CALCULATION .......................................................................................................11 TEST RESULTS SUMMARY ..........................................................................................................................................11 TEST DATA ................................................................................................................................................................11 FCC §15.205, §15.209, §15.231 (B) - RADIATED EMISSIONS .............................................................................14 APPLICABLE STANDARD ............................................................................................................................................14 EUT SETUP ................................................................................................................................................................14 EMI TEST RECEIVER SETUP .......................................................................................................................................15 TEST PROCEDURE ......................................................................................................................................................15 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................16 TEST RESULTS SUMMARY ..........................................................................................................................................16 TEST DATA ................................................................................................................................................................16 FCC §15.231(A) (1) - DEACTIVATION TESTING.................................................................................................20 APPLICABLE STANDARD ............................................................................................................................................20 TEST PROCEDURE ......................................................................................................................................................20 TEST DATA ................................................................................................................................................................20 FCC §15.231(C) – 20 DB EMISSION BANDWIDTH TESTING ...........................................................................22 APPLICABLE STANDARD ............................................................................................................................................22 TEST PROCEDURE ......................................................................................................................................................22 TEST DATA ................................................................................................................................................................22 FCC Part 15.231 Page 2 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B GENERAL INFORMATION Product Description for Equipment under Test (EUT) Product Medical Alert System Tested Model ES005 Multiple Model# ES005-BP, ES005-BC, ES005-BW, ES005-BM Frequency Range 434.21MHz Field Strength 80 dBuV/m@3m Modulation Technique ASK Antenna Specification 2 dBi Voltage Range DC 3.7V from battery or DC 5V from adapter Date of Test 2019-06-18 ~ 2019-07-16 Sample serial number 190606002 Received date 2019-06-06 Sample/EUT Status Good condition Model: JF005WR-0500100UH Adapter information Input: AC 100-240V, 50/60Hz, 0.18A Output: DC 5V, 1A Manufacturer information Company Name: Shenzhen Joy Technology Co. Ltd Company Address: 5/F,3rd Building, Shunchengji Park, Huayun Road of Dalang, Longhua, Shenzhen, China Notes: This series products model: ES005-BP, ES005-BC, ES005-BW, ES005-BM and ES005 are identical schematics, they have different model name. Model ES005 was selected for fully testing, the detailed information can be referred to the declaration. Objective This test report is prepared on behalf of ETROG SYSTEMS LTD.. All the test measurements were performed according to the measurement procedure described in ANSI C63.10 - 2013. The tests were performed in order to determine compliance with FCC Part 15, Subpart C, section 15.203, 15.205,15.207, 15.209, 15.35(c) and 15.231 rules. Related Submittal(s)/Grant(s) Not Related Submittal(s)/Grant(s). Test Methodology All measurements contained in this report were conducted with ANSI C63.10 - 2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. All emissions measurement was performed at Bay Area Compliance Laboratories Corp. (Shenzhen). The radiated testing was performed at an antenna-to-EUT distance of 3 meters. FCC Part 15.231 Page 3 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B Measurement Uncertainty Parameter Uncertainty Occupied Channel Bandwidth ±5% RF Output Power with Power meter ±0.5dB RF conducted test with spectrum ±1.5dB AC Power Lines Conducted Emissions ±1.95dB Radiated Below 1GHz ±4.75dB Emissions Above 1GHz ±4.88dB Temperature ±3℃ Humidity ±6% Supply voltages ±0.4% Note: Otherwise required by the applicant or Product Regulations, Decision Rule in this report did not consider the uncertainty. Test Facility The test site used by Bay Area Compliance Laboratories Corp. (Shenzhen) to collect test data is located on the 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China. The test site has been approved by the FCC under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No.: 342867, the FCC Designation No.: CN1221. The test site has been registered with ISED Canada under ISED Canada Registration Number 3062B. FCC Part 15.231 Page 4 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B SYSTEM TEST CONFIGURATION Justification The system was configured for testing by manufacturer. Operating frequency:434.21 MHz. Special Accessories No special accessories was used Equipment Modifications No modification was made to the EUT. Support Equipment List and Details Manufacturer Description Model Serial Number Yeastar PBX MY PBX_SOHO 1103020 Kinhao Telephone N/A 14589612 Herene Telephone HD-70 N/A External I/O Cable Cable Description Length (m) From / Port To Un-shielding detachable RJ11 cable 1.5 EUT PBX Un-shielding detachable RJ11 cable 2.0 Telephone PBX Un-shielding detachable RJ11 cable 2.0 EUT Telephone Un-shielding Un-detachable AC cable 1.2 PBX LISN 2 Un-shielding Un-detachable DC cable 1.0 EUT Adapter FCC Part 15.231 Page 5 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B Block Diagram of Test Setup LISN 2 LISN 1 Telephone PBX Telephone EUT Adapter Adapter 10cm 10cm 10cm 10cm Socket 1.0 meter Non-Conductive Table 80/150 cm above Ground Plane 1.5 meters FCC Part 15.231 Page 6 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §15.203 Antenna Requirement Compliance §15.207 (a) Conducted Emissions Compliance §15.205, §15.209, §15.231(b) Radiated Emissions Compliance §15.231 (c) 20dB Emission Bandwidth Compliance §15.231 (a) (1) Deactivation Compliance FCC Part 15.231 Page 7 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B TEST EQUIPMENT LIST AND DETAILS Serial Calibration Calibration Manufacturer Description Model Number Date Due Date AC Line Conducted Emission Test Rohde & Schwarz EMI Test Receiver ESCS30 100176 2018-07-11 2019-07-11 3560.6650.12- Rohde & Schwarz LISN ENV216 2019-01-25 2020-01-25 101613-Yb Rohde & Schwarz Transient Limiter ESH3Z2 DE25985 2019-03-02 2020-03-01 Conducted Emission UF A210B-1- Unknown 78652 2018-11-12 2019-11-12 Cable 0720-504504 Rohde & Schwarz CE Test software EMC 32 V 09.10.0 NCR NCR Radiated Emission Test A.H. System Horn Antenna SAS-200/571 135 2018-09-01 2021-08-31 Rohde & Schwarz Signal Analyzer FSEM 845987/005 2018-06-23 2019-06-23 Rohde & Schwarz Signal Analyzer FSEM 845987/005 2019-06-23 2020-06-23 COM-POWER Pre-amplifier PA-122 181919 2018-11-12 2019-11-12 Sonoma Instrument Amplifier 310N 186238 2018-11-12 2019-11-12 Sunol Sciences Broadband Antenna JB1 A040904-1 2017-12-22 2020-12-21 1316.3003K03 Rohde & Schwarz EMI Test Receiver ESR 2018-07-11 2019-07-11 -101746-zn 1316.3003K03 Rohde & Schwarz EMI Test Receiver ESR 2019-07-11 2020-07-11 -101746-zn Rohde & Schwarz Spectrum Analyzer FSU26 200120 2019-03-02 2020-03-01 UTiFLEX MICRO- UFA147A- MFR64639 RF Cable 2018-11-12 2019-11-12 C0AX 2362-100100 231029-003 Ducommun RF Cable 104PEA 218124002 2018-11-12 2019-11-12 Technologies Ducommun RF Cable RG-214 1 2018-11-19 2019-05-21 Technologies Ducommun RF Cable RG-214 1 2019-05-21 2019-11-19 Technologies Ducommun RF Cable RG-214 2 2018-11-12 2019-11-12 Technologies * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to requirements that traceable to National Primary Standards and International System of Units (SI). FCC Part 15.231 Page 8 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B FCC §15.203 - ANTENNA REQUIREMENT Applicable Standard An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. Antenna Connector Construction The EUT has one internal antenna arrangement, which used a unique coupling to this product. And the antenna is 2dBi; fulfill the requirement of this section. Please refer to EUT photos. Result: Compliant. FCC Part 15.231 Page 9 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS Applicable Standard FCC§15.207 EUT Setup The setup of EUT is according with per ANSI C63.4-2014 measurement procedure. The specification used was with the FCC Part 15.207 limits. The adapter was connected to a 120 VAC/60 Hz power source. EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz. During the conducted emission test, the EMI test receiver was set with the following configurations: Frequency Range IF B/W 150 kHz – 30 MHz 9 kHz Test Procedure During the conducted emission test, the adapter was connected to the outlet of the LISN. Maximizing procedure was performed on the six (6) highest emissions of the EUT. All final data was recorded in the Quasi-peak and average detection mode. FCC Part 15.231 Page 10 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B Corrected Factor & Margin Calculation The Corrected factor is calculated by adding LISN VDF (Voltage Division Factor), Cable Loss and Transient Limiter Attenuation. The basic equation is as follows: Correction Factor = LISN VDF + Cable Loss + Transient Limiter Attenuation The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7 dB means the emission is 7 dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Results Summary According to the recorded data in following table, the EUT complied with the FCC Part 15.207. Refer to CISPR16-4-2:2011 and CISPR 16-4-1:2009, the measured level complies with the limit if Lm + U(Lm) ≤ Llim + Ucispr In BACL, U(Lm) is less than Ucispr, if Lm is less than Llim, it implies that the EUT complies with the limit. Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 50 % ATM Pressure: 101.0 kPa The testing was performed by Haiguo Li on 2019-06-26. EUT operation mode: Transmitting &Talking FCC Part 15.231 Page 11 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B AC 120V/60 Hz, Line 90 80 70 QP 60 Level in dBμ AV 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Corrected Correction Frequency Limit Margin Detector Amplitude Factor (MHz) (dBμV) (dB) (PK/Ave./QP) (dBμV) (dB) 0.213500 40.4 19.8 63.1 22.7 QP 0.305350 39.8 19.7 60.1 20.3 QP 0.340870 38.4 19.9 59.2 20.8 QP 0.348690 36.8 19.9 59.0 22.2 QP 0.996730 33.2 19.9 56.0 22.8 QP 1.010730 33.3 19.9 56.0 22.7 QP 0.213500 34.9 19.8 53.1 18.2 Ave. 0.305350 33.3 19.7 50.1 16.8 Ave. 0.340870 32.6 19.9 49.2 16.6 Ave. 0.348690 30.4 19.9 49.0 18.6 Ave. 0.996730 26.1 19.9 46.0 19.9 Ave. 1.010730 25.3 19.9 46.0 20.7 Ave. FCC Part 15.231 Page 12 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B AC 120V/60 Hz, Neutral 90 80 70 QP 60 Level in dBμ AV 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Corrected Correction Frequency Limit Margin Detector Amplitude Factor (MHz) (dBμV) (dB) (PK/Ave./QP) (dBμV) (dB) 0.217500 42.0 19.8 62.9 20.9 QP 0.309290 38.8 19.7 60.0 21.2 QP 0.340870 38.8 19.8 59.2 20.4 QP 0.372330 34.8 19.8 58.4 23.6 QP 0.400030 35.2 19.8 57.9 22.7 QP 0.959390 32.6 19.8 56.0 23.4 QP 0.217500 37.3 19.8 52.9 15.6 Ave. 0.309290 32.9 19.7 50.0 17.1 Ave. 0.340870 32.8 19.8 49.2 16.4 Ave. 0.372330 28.2 19.8 48.4 20.2 Ave. 0.400030 27.9 19.8 47.9 20.0 Ave. 0.959390 25.6 19.8 46.0 20.4 Ave. Note: 1) Correction Factor =LISN VDF (Voltage Division Factor) + Cable Loss + Transient Limiter Attenuation 2) Corrected Amplitude = Reading + Correction Factor 3) Margin = Limit – Corrected Amplitude FCC Part 15.231 Page 13 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B FCC §15.205, §15.209, §15.231 (b) - RADIATED EMISSIONS Applicable Standard FCC §15.205, §15.209, §15.231 (b) According to FCC §15.231(b), the field strength of emissions from intentional radiators operated under this section shall not exceed the following: Fundamental frequency Field Strength of Field Strength of spurious Fundamental (Microvolts emissions ((Microvolts (MHz) /meter) /meter) 40.66-40.70 2250 225 70-130 1250 125 130-174 1250 to 3750** 125 to 375** 174-260 3750 375 260-470 3750 to 12500** 375 to 1250** Above 470 12500 1250 *Linear interpolations. The above field strength limits are specified at a distance of 3-meters the tighter limits apply at the band edges. EUT Setup Below 1 GHz: FCC Part 15.231 Page 14 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B Above 1 GHz: The radiated emission tests were performed in the 3 meters test site, using the setup accordance with the ANSI C63.10 - 2013. The specification used was the FCC 15 § 15.209, 15.205 and 15.231. EMI Test Receiver Setup The system was investigated from 30 MHz to 5 GHz. During the radiated emission test, the test receiver was set with the following configurations: Frequency Range RBW Video B/W IF B/W Measurement 30MHz – 1000 MHz 100 kHz 300 kHz 120 kHz QP Above 1 GHz 1 MHz 3 MHz / PK Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. All final data was recorded in the Quasi-peak detection mode from 30MHz to 1GHz, Peak and average detection mode above 1 GHz. FCC Part 15.231 Page 15 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Loss and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Loss + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 5.8 dB means the emission is 5.8 dB below the limit. The equation for margin calculation is as follows: Margin = Limit –Corrected Amplitude Test Results Summary According to the data in the following table, the EUT complied with the FCC §15.205, §15.209, §15.231 (b) Refer to CISPR16-4-2:2011 and CISPR 16-4-1:2009, the measured level complies with the limit if Lm + U(Lm ) ≤ Llim + Ucispr In BACL, U(Lm ) is less than Ucispr, if Lm is less than Llim, it implies that the EUT complies with the limit. Test Data Environmental Conditions Temperature: 23~25 ℃ Relative Humidity: 49~50 % ATM Pressure: 100.0~101.0 kPa The testing was performed by Alan He from 2019-06-18 to 2019-07-16. Test mode: Transmitting&talking FCC Part 15.231 Page 16 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B 80 Fundamental 70 60 50 Electric Field Strength QP-3m Level in dB¦ÌV/ 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Corrected Antenna Turntable Correction Frequency Detector Antenna Limit Margin Amplitude Height Position Factor (MHz) (PK/QP/Ave.) Polarity (dBμV/m) (dB) (dBμV/m) (cm) (degree) (dB/m) 30.975375 17.70 QP 389.0 H 179.0 -8.2 22.30 40.00 153.599750 13.13 QP 365.0 H 119.0 -14.3 13.13 43.50 497.874750 12.92 QP 302.0 V 284.0 -7.2 12.92 46.00 626.145000 18.23 QP 275.0 V 0.0 -2.6 18.23 46.00 832.569875 25.42 QP 278.0 V 223.0 5.2 25.42 46.00 868.016750 42.61 QP 105.0 V 44.0 6.0 3.39 46.00 FCC Part 15.231 Page 17 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B Frequency Receiver Rx Antenna FCC Part 15.231(b) (MHz) Corrected Corrected Turntable Factor Amplitude Reading Detector Degree Height Polar Limit Margin (dB/m) (dBμV/m) Comment (dBμV) (PK/QP/Ave.) (cm) (H/V) (dBμV/m) (dB) 434.21 89.86 PK 359 1 H -8.9 80.00 80.8 0.80 Fundamental 434.21 79.35 PK 165 1.1 V -8.9 70.45 80.8 10.35 Fundamental 1302.63 50.44 PK 349 1.6 H -4.31 46.13 54 7.87 Harmonic 1302.63 46.93 PK 98 2.0 V -4.31 42.62 54 11.38 Harmonic 1736.84 53.86 PK 285 2.2 H -2.01 51.85 60.8 8.95 Harmonic 1736.84 53.00 PK 151 2.4 V -2.01 50.99 60.8 9.81 Harmonic Note: Peak detector data complies with the average limit, average results are not necessary to provide. Corrected Amplitude = Corrected Factor + Reading Corrected Factor = Antenna factor (Rx) + cable loss – amplifier factor Margin = Limit - Corr. Amplitude FCC Part 15.231 Page 18 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B Horizontal Date: 16.JUL.2019 20:16:47 Vertical Date: 16.JUL.2019 20:10:48 FCC Part 15.231 Page 19 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B FCC §15.231(a) (1) - DEACTIVATION TESTING Applicable Standard Per FCC §15.231(a) (1), A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. Test Procedure 1. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 2. Set center frequency of spectrum analyzer=operating frequency. 3. Set the spectrum analyzer as RBW=100kHz/ VBW=300kHz/ Span=0Hz. 4. Repeat above procedures until all frequency measured was complete. Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 50 % ATM Pressure: 101.0 kPa The testing was performed by Andy Yu on 2019-06-26. Test mode: Transmitting FCC Part 15.231 Page 20 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B Test Result: Compliant. This product will cease transmission within 5 seconds after activation. Please refer to following plots. RBW 100 kHz Delta 2 [T1 ] * VBW 300 kHz 0.31 dB Ref 99 dBµV * Att 10 dB SWT 10 s 5.000000 s Marker 1 [T1 ] 29.20 dBµV 90 1.020641 s A Delta 1 [T1 ] 1 PK -0.10 dB MAXH 80 929.487179 ms 70 60 50 3DB 40 1 1 2 30 20 10 0 Center 434.21 MHz 1 s/ Date: 26.JUN.2019 16:04:23 FCC Part 15.231 Page 21 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B FCC §15.231(c) – 20 dB EMISSION BANDWIDTH TESTING Applicable Standard Per 15.231(c), The bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices operating above 70 MHz and below 900 MHz. Bandwidth is determined at the points 20 dB down from the modulated carrier. Test Procedure With the EUT’s antenna attached, the waveforzm was received by the test antenna which was connected to the spectrum analyzer, plot the 20 dB bandwidth. Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 50 % ATM Pressure: 101.0 kPa The testing was performed by Andy Yu on 2019-06-26. Test Mode: Transmitting Please refer to following table and plots. FCC Part 15.231 Page 22 of 23

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190606002-00B Channel Frequency 20 dB Emission Bandwidth ＜Limit Result (MHz ) (kHz) (kHz) 434.21 93.59 1085.525 Pass 20 dB Emission Bandwidth * RBW 3 kHz Delta 1 [T1 ] * VBW 10 kHz 0.46 dB Ref 96 dBµV * Att 10 dB SWT 45 ms 93.589743590 kHz Marker 1 [T1 ] D1 92.66 dBµV 90 72.37 dBµV 434.158717949 MHz A 1 PK 80 MAXH 1 1 D2 72.66 dBµV 70 60 50 40 3DB 30 20 10 0 Center 434.21 MHz 40 kHz/ Span 400 kHz Date: 26.JUN.2019 15:41:41 ***** END OF REPORT ***** FCC Part 15.231 Page 23 of 23


Document Created: 2019-07-18 23:55:47
Document Modified: 2019-07-18 23:55:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC