Wireless_Charger_declaration

FCC ID: 2ATHG-IC1

Cover Letter(s)

Download: PDF
FCCID_4358101

Weret AB Date: 07/09/2019 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2ATHG-IC1 To Whom It May Concern: This letter is to ascertain that Weret AB Product Weret Wireless Charger IC1, has been the units used for conducting FCC compliance testing, and it meets KDB 680106 Clause 5(2) all 6 conditions as stated below hence PBA is not required. 1 Power transfer frequency is less than 1 MHz. Yes, Operation Frequency is 110K-205KHZ. 2 Output power from each primary coil is less than or equal to 15 watts. max output power less than 5W. 3 The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Yes. 4 Client device is placed directly in contact with the transmitter Yes. 5 Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).. Yes. 6 The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes. If you have any question or concerns, pls. contact us. Sincerely, Name: Emma Rozada Date: 2019-07-09 Title: CEO Signature of applicant:


Document Created: 2019-07-15 10:29:28
Document Modified: 2019-07-15 10:29:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC