Test Report

FCC ID: 2ATH8201905290123

Test Report

Download: PDF
FCCID_4313262

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 1 of 19 TEST REPORT Application No.: SZEM1905014399CR(SGS SZ No.:T51910240139EM) Applicant: YING JIANG Technology Toys Address of Applicant: Hengxin Building material Opposite 324 National Road, Lianshang Town, Chenghai District, Shantou China Equipment Under Test (EUT): EUT Name: stunt car Model No.: YJ-001, YJ-002, YJ-003, YJ-006, YJ-007, YJ-009, YJ-010, YJ-012, YJ-013, YJ-014, YJ-015, YJ-016, YJ-018, YJ-019, YJ-020, YJ-021, YJ-022, YJ-023, YJ-024, YJ-004, YJ-004-1, YJ-004-2, YJ-031-19, YJ-031-5, YJ-031-4, YJ- 031-24, YJ-031-28, YJ-030-23, YJ-030-16, YJ-030-3, YJ-030-1，YJ-035-5, YJ-035-4, YJ-035-3, YJ-035-2, YJ-035-1, YJ-035-6, YJ-034-5, YJ-034-4, YJ- 034-3, YJ-034-2, YJ-034-1, YJ-034-6, YJ-029-25, YJ-029-24, YJ-029-10, YJ-029-9, YJ-029-8, YJ-029-7, YJ-029-26, YJ-028-21, YJ-028-14, YJ-028- 13, YJ-028-12, YJ-028-11, YJ-028-17, YJ-028-22, YJ-033-5, YJ-033-4, YJ- 033-3, YJ-033-2, YJ-033-1, YJ-033-6, YJ-032-2, YJ-032-1, YJ-032-6, YJ- 032-5, YJ-032-3, YJ-032-4, YJ-036-2, YJ-001B, YJ-036-3, YJ-017B, YJ- 036-1, YJ-037-1,YJ-037-2,YJ-037-3,YJ-037-4,YJ-037-5,YJ-037-6 ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Requested Age Grading: 3+ FCC ID: 2ATH8201905290123 Standard(s) : 47 CFR Part 15, Subpart C 15.227 Date of Receipt: 2019-05-24 Date of Test: 2019-05-24 to 2019-05-29 Date of Issue: 2019-06-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 2 of 19 Revision Record Version Chapter Date Modifier Remark 01 2019-06-03 Original Authorized for issue by: Gebin Sun /Project Engineer Eric Fu /Reviewer

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 3 of 19 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result . 47 CFR Part 15. 47 CFR Part 15, Subpart Antenna Requirement Subpart C 15.227 N/A C15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result . 47 CFR Part 15, ANSI €63.10 (2013) 47 CFR Part 15, Subpart 200B Bandwidth guppar C 15.227 Section 6.9 C15.215 Pass E‘j;%:;:gg?;rs"é‘nh; 47 CFR Part 15, ANSI C63.10 (2018) 47 CFR Part 15, Subpart ... (15.227(a)) Subpart C 15.227 Section 6.4 C 15.227(a) . faa: 47 CFR Part 15, ANSI €63.10 (2013) 47 CFR Part 15, Subpart Radiated Emission$ guppary $ 15,.297 Section 6.486.5___| C15.227(b) & C 15.209 |__"*° Declaration of EUT Family Grouping: Model No.: YJ—001, ¥J—002, ¥J—003, YJ—006, YJ—007, YJ—009, YJ—010, YJ—012, YJ—013, YJ—014, YJ—015, YJ—016, YJ—018, YJ—019, Y¥J—020, YJ—021, YJ—022, YJ—023, YJ—024, YJ—004, YJ—004—1, Y¥J—004—2, YJ— 031—19, YJ—031—5, YJ—081—4, YJ—031—24, YJ—031—28, YJ—030—23, YJ—030—16, YJ—030—3, YJ—030—1, YJ— 035—5, YJ—035—4, YJ—035—3, YJ—035—2, YJ—035—1, YJ—035—6, YJ—034—5, YJ—034—4, YJ—034—3, YJ—034—2, YJ—034—1, YJ—034—6, YJ—029—25, YJ—029—24, YJ—029—10, YJ—029—9, YJ—029—8, YJ—029—7, YJ—029—26, YJ— 028—21, YJ—028—14, YJ—028—13, YJ—028—12, YJ—028—11, YJ—028—17, YJ—028—22, YJ—033—5, YJ—033—4, YJ— 033—3, YJ—033—2, YJ—033—1, YJ—033—6, YJ—032—2, YJ—032—1, YJ—032—6, YJ—032—5, YJ—032—3, YJ—032—4, YJ—036—2, YJ—001B, YJ—036—3, YJ—017B, YJ—036—1, YJ—037—1,¥J—037—2,YJ—037—3,YJ—037—4,YJ—037— 5,YJ—037—6 Only the model YJ—012 was tested, since the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models. Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overieaf, available on request or accessible at hitp:\win.sgs.comen/Terms—and—Conditions.aspx and, for electronic format documents, Subject to Terms and Gonditions for blectrontelim Documents at hi sgs. comfentTerms—ang:Condiions/terms.6.booument aspx. Attention is drawn to the limitation of lability, indamnification and juriedietion issues defined therein. Any holder of this document is advised that information contained hereon raflects the Company‘s findings at the time of ts intervention only and within the limits of Client‘s instructions, if any. The Company‘s sole responsibility is to its Client and this document does not exonerate parties to a fransaction from exércising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or e 0. 8 TestngSemices Q‘;? appearance of this documentis unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. 5 Attention: To check the authenticity of testing /inspection report & certificate, please contact us at télephone: (86—755) 8307 1443, or email: CN.Doccheck@sgs.com 16. [No—t Worisp,N—1, Mddl Secion,Scence & Technoogy Part Shenthen, China 518057 t (86—756)26012053 1 (%6—759)26710504 wnnw.sgegroup.com.en hB «BRABRdEN—108—S1 B #B#R: s1eos7 t (B6—758)26012053 1 (@6—755) 26710504 sps china@sys.com Member of the SGS Group (SGS SA)

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 4 of 19 3 Contents Page 1. COVER PAGE ...... .. in ecmmemmeenmnrneermerernermereeermereeenmeereerenmeereerenneerernerennererenneernennerennenrnerennennnernnnennn en nnne 1 2 TEST SUMMARY .........memmmmmmeermererremereeermereerermereerermereerenmerereerenneeeennereeereerenneernerenneennerennennn en3 3 CONTENTS. 4 GENERAL INFORMATION ......... o0 eeeremreereereeermereeermereeermereeermerereeneneereeenmeereeenmeereennnenrenrnne 5 4.1 DETAILS OF E—ULT ; .. 220 en en en en m en eere en en e en en en en en en en en en en en en en eneve en en evee en enevee en enevneeenenenee n 5 4.2 Description or Support Units .5 4.3 MEASUREMENT UNCERTAINTY ..... .5 4.4 TEST LOCATION .6 4.5 TEest Faciuty.. .6 4.6 DEVIATION FROM STANDARDS. .6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..... .. ... . en en en eene m en en en en en en en en en en en en enevnenenenene 6 5 EQUIPMENT LIST ...... .ce eeeremreermmereeermereeermereeermereeermereeermerereenereeenmeeneereeenmeereennmeereeennnenre en 7 6 RADIO SPECTRUM TECHNICAL REQUIREMENT .........0.000000 0e eeermeereeermeeneereennmeerereennmerennmeeren n 9 6.1 ANTENNA REQUIREMENT .. .9 6.1.1 Test Requirement:..... .9 6.1.2 CONGIUSION ............l.ccsceereeememereveveerereeeenrereeenerereeenerereeenerereveeneneneneenenennenev en neneveenenenevnenenenevee n 9 7 RADIO SPECTRUM MATTER TEST RESULTS .......... cce eememmeeermnereeermereeermeneereeenmnmeereenmeereennmenrenee 10 7.1 200B BANDWIDTH.... 7.1.1 EU.T. Operation 7.1.2 Test S@tup Di@graM ....c.c.cclll 7.1.3 Measurement Procedure and Data. 7.2 FIELD STRENGTH OF THE FUNDAMENTAL SighaL (15.227(A)). 7.2.1 E.U.T. Operation.. 7.2.2 Test Setup Diagram 7.2.3 Measurement Procedure and Data. 7.3 RADIATED EMISSIONS ........c.c cce 7.3.1 E.U.T. Operation..... 7.3.2 Test Setup Diagram 7.3.3 Measurement Procedure and Data. 8 PHOTOGRAPHS........ ... cecenneeeererererereerererereerererereerererereeren en en nen en en nen en en en nen en nenvenenennenenevnnenennvnnenennene 19 8.1 TEST SETUP ... cessn en en eeenenenenrneenen en 8.2 EUT ConstructionaL DetaiLs (EUT PHotos) Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overieat, available on request or accessible at hpy/wwwsgs.comen/Terms—and—condlons.aspx and. for electronic format documents, subject to Terms and Condilions for Electronic Documents at hiip:/hwwnw.sgs.comfen/Terms—and—Gonditions/Terms—0—Document aspx. Attention is drawn to the limitation of lability, indamnification and jurlsdiction issues defined therein. Any holder of this document is advised that information contained hereon raflects the Company‘s findings at the time of ts intervention only and within the limits of Clients instructions, if any. The Company‘s sole responsiblity is to its Client and this document does not exonerate parties to a fransaction from exereising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or att +M 0.= appearance of this documentis unlawful and offendars may be prosecuted to the fullest extent of the law. Unlass othenwise stated the on TestngSemices <$ results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Aftention: To check the authenticity of testing /inspection report & certificate, please contact us at télophone: (86—755) 8307 1443, or email: CN. Doecheck@sas.com A p00.0¢ No.t Wortshap, N—10,l Secton, Science 8 Technology Par: Shenzhen, Cina 518057 t (86—755) 26012053 f (86—758) 26710504 wimsgsgroup.com.en ShorwhenBorttw BreeC(shoaloy fB BAARdERN—10K—S1B #B#R: s1eos7 t (B6—758)26012053 1 (@6—755) 26710504 sps china@sys.com t Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 5 of 19 4 General Information 4.1 Details of E.U.T. Power supply: 3V DC(1.5V x 2 "AA" Size Batteries) for TX Operation Frequency: 27.145MHz Sample Type: Portable production Antenna Type: Integral 4.2 Description of Support Units The EUT has been tested as an independent unit. 4.3 Measurement Uncertainty No. Item Measurement Uncertainty 1 Occupied Bandwidth ± 3% 2 RF Radiated power ± 4.5dB (below 1GHz) 3 Radiated Spurious emission test ± 4.5dB (Below 1GHz) 4 Temperature test ± 1°C 5 Humidity test ± 3% 6 Supply voltages ± 1.5% 7 Time ± 3%

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 6 of 19 4.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 4.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.6 Deviation from Standards None 4.7 Abnormalities from Standard Conditions None

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 7 of 19 5 Equipment List 20dB Bandwidth Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date DC Power Supply ZhaoXin RXN-305D SEM011-02 2018-09-25 2019-09-24 Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2018-09-27 2019-09-26 JS1120-2 Measurement Software JS Tonscend N/A N/A N/A BT/WIFI V2. Coaxial Cable SGS N/A SEM031-02 2018-07-12 2019-07-11 Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A Signal Generator KEYSIGHT N5173B SEM006-05 2018-09-27 2019-09-26 Power Meter Rohde & Schwarz NRVS SEM014-02 2018-09-25 2019-09-24 Field Strength of the Fundamental Signal (15.227(a)) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 3m Semi-Anechoic ETS-LINDGREN N/A SEM001-01 2017-08-05 2020-08-04 Chamber e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM025-01 2018-07-12 2019-07-11 EMI Test Receiver Agilent Technologies N9038A SEM004-05 2018-09-25 2019-09-24 BiConiLog Antenna ETS-LINDGREN 3142C SEM003-01 2017-06-27 2020-06-26 (26-3000MHz) Pre-amplifier Agilent Technologies 8447D SEM005-01 2019-04-01 2020-03-31 (0.1-1300MHz) Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 Radiated Emissions(30MHz-1GHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 3m Semi-Anechoic ETS-LINDGREN N/A SEM001-01 2017-08-05 2020-08-04 Chamber e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM025-01 2018-07-12 2019-07-11 EMI Test Receiver Agilent Technologies N9038A SEM004-05 2018-09-25 2019-09-24 BiConiLog Antenna ETS-LINDGREN 3142C SEM003-01 2017-06-27 2020-06-26 (26-3000MHz) Pre-amplifier Agilent Technologies 8447D SEM005-01 2019-04-01 2020-03-31 (0.1-1300MHz) Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 8 of 19 General used equipment Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-03 2018-09-27 2019-09-26 Indicator Industry Factory Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-04 2018-09-27 2019-09-26 Indicator Industry Factory Humidity/ Temperature Mingle N/A SEM002-08 2018-09-27 2019-09-26 Indicator Changchun Barometer Meteorological DYM3 SEM002-01 2019-04-04 2020-04-03 Industry Factory

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 9 of 19 6 Radio Spectrum Technical Requirement 6.1 Antenna Requirement 6.1.1 Test Requirement: 47 CFR Part 15, Subpart C 15.203 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited 6.1.2 Conclusion EUT Antenna: The antenna is integrated on the main PCB and no consideration of replacement. The best case gain of the antenna is 0dBi. Antenna location: Refer to Appendix(Internal photos)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 10 of 19 7 Radio Spectrum Matter Test Results 7.1 20dB Bandwidth Test Requirement 47 CFR Part 15, Subpart C 15.215 Test Method: ANSI C63.10 (2013) Section 6.9 7.1.1 E.U.T. Operation Operating Environment: Temperature: 23.3 °C Humidity: 59.4 % RH Atmospheric Pressure: 1005 mbar Test mode b:TX mode_Keep the EUT in transmitting with modulation mode. 7.1.2 Test Setup Diagram 7.1.3 Measurement Procedure and Data

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 11 of 19 Mode:b * RBW 100 Hz Delta 1 [T1 ] * VBW 300 Hz 1.77 dB Ref -10 dBm * Att 10 dB SWT 3.6 s 6.250000000 kHz -10 Marker 1 [T1 ] -52.33 dBm -20 27.141375000 MHz A Marker 2 [T1 ] 1 PK -30.31 dBm 2 VIEW -30 27.144500000 MHz -40 1 -50 D1 -50.31 dBm 1 -60 3DB -70 -80 -90 -100 -110 Center 27.14444 MHz 3 kHz/ Span 30 kHz

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 12 of 19 7.2 Field Strength of the Fundamental Signal (15.227(a)) Test Requirement 47 CFR Part 15, Subpart C 15.227(a) Test Method: ANSI C63.10 (2013) Section 6.4 Measurement Distance: 3m Limit: = 10000 microvolts/meter at 3 meters, the emission limit is based on measurement instrumentation employing an average Detector:. The provisions in §15.35 for limiting peak emissions apply. 7.2.1 E.U.T. Operation Operating Environment: Temperature: 23.5 °C Humidity: 55 % RH Atmospheric Pressure: 1005 mbar Test mode b:TX mode_Keep the EUT in transmitting with modulation mode. 7.2.2 Test Setup Diagram Antenna Tower Antenna (Turntable) 7.2.3 Measurement Procedure and Data For testing performed with the loop antenna, the center of the loop was positioned 1 m above the ground and positioned with its plane vertical at the specified distance from the EUT. During testing the loop was rotated about its vertical axis for maximum response at each azimuth and also investigated with the loop positioned in the horizontal plane. Only the worst position of vertical was shown in the report. Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed qveringt. anpable on requent or arcennine oieinsaenafrenifermsandvepdifionsaear and. for electronis fognat documents. subject to Terms and Condilions for Electronic Documents at hiip:/hwwnw.sgs.comfen/Terms—and—Gonditions/Terms—0—Document aspx. Attention is drawn to the limitation of lability, indamnification and jurlsdiction issues defined therein. Any holder of this document is advised that information contained hereon raflects the Company‘s findings at the time of ts intervention only and within the limits of Clients instructions, if any. The Company‘s sole responsibiity is to its Client and this document does not exoncrate parties to a fransaction from exereising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this documentis unlawful and offendars may be prosecuted to the fullest extent of the law. Unlass othenwise stated the results shown in this test report refer only to the sample() tested and such sample(s) are retained for 30 days only. Aftention: To check the authenticity of testing /inspection report & certificate, please contact us at télophone: (86—755) 8307 1443, or email: CN.Doecheck@sgs.com No.t Wortshap, —10,e Secton, Science 8 Technology Pars, Shenzhen, Cina 518057 t (86—755) 26012053 f (86—758) 26710504 wmsgsgroup.com.en d 1A EM—104—S7 B #B#R: s1eos7 t (B6—758)26012053 1 (@6—755) 26710504 sps china@sys.com t Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 13 of 19 Mode:b; Polarization:Horizontal

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 14 of 19 Mode:b; Polarization:Vertical Remark: 1) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows: Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor 2) As shown in this section,the field strength limits are based on average limits. However,the peak field strength of any emission was not exceed the maximum permitted average limits specified. So, only above measurement data were shown in the report.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 15 of 19 7.3 Radiated Emissions Test Requirement 47 CFR Part 15, Subpart C 15.227(b) & C 15.209 Test Method: ANSI C63.10 (2013) Section 6.4&6.5 Measurement Distance: 3m Limit: Frequency(MHz) Field strength(microvolts/meter) Measurement distance(meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90kHz and 110-490kHz. Radiated emission limits in these two bands are based on measurements employing an average detector. Field Measurement Frequency(MHz) strength(microvolts/meter) distance(meters) 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for above 1000MHz. Radiated emission limits above 1000MHz is based on measurements employing an average detector.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 16 of 19 7.3.1 E.U.T. Operation Operating Environment: Temperature: 23.5 °C Humidity: 55 % RH Atmospheric Pressure: 1005 mbar Test mode b:TX mode_Keep the EUT in transmitting with modulation mode. 7.3.2 Test Setup Diagram 7.3.3 Measurement Procedure and Data a. The EUT was placed on the top of a rotating table 0.8 meters above the ground for below 1GHz at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. g. The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, only the test worst case mode is recorded in the report. Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 17 of 19 Mode:b; Polarization:Horizontal

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 18 of 19 Mode:b; Polarization:Vertical Remark: The disturbance below 30MHz was very low and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190501439902 Page: 19 of 19 8 Photographs 8.1 Test Setup Refer to Setup Photos 8.2 EUT Constructional Details (EUT Photos) Refer to EUT external and internal photos - End of the Report -


Document Created: 2019-06-05 03:50:53
Document Modified: 2019-06-05 03:50:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC