RF Exposure Info

FCC ID: 2ATGY-AWC1052

RF Exposure Info

Download: PDF
FCCID_4357110

FCC RF EXPOSURE REPORT For Charging Stand for Apple Watch MODEL NUMBER: AWC1052, AWC1052AW, AWC1052SG, AWC1052XX ( X would be any Arabian number or English letter or blank) FCC ID: 2ATGY-AWC1052 REPORT NUMBER: 4789012724.1-4 ISSUE DATE: June 27, 2019 Prepared for Ubio Labs, Inc. 2821 Northup Way, Suite 250, Bellevue, WA 98004, USA Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi- Tech Development Zone Dongguan, 523808, People’s Republic of China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. This report does not imply that the product(s) has met the criteria for certification.

REPORT NO.: 4789012724.1-4 Page 2 of 9 Revision History Rev. Issue Date Revisions Revised By V0 06/27/2019 Initial Issue UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch

REPORT NO.: 4789012724.1-4 Page 3 of 9 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. REQUIREMENT ................................................................................................................. 6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch

REPORT NO.: 4789012724.1-4 Page 4 of 9 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Ubio Labs, Inc. Address: 2821 Northup Way, Suite 250, Bellevue, WA 98004, USA Manufacturer Information Company Name: Shenzhen PYS Industrial Co., LTD Address: Floor 3,8,12，Bldg 9#, Lianhua Industrial Zone, Loangyuan Road, Longhua Street, Longhua District, Shenzhen EUT Description EUT Name: Charging Stand for Apple Watch Model: AWC1052 Serial Model: Please refer to page 8 clause 5.1. Description of EUT Brand Name: / Sample Status: Normal Sample ID: 2331442 Sample Received Date: May 24, 2019 Date of Tested: June 3, 2019 ~ June 27, 2019 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47CFR§1.1307 PASS FCC 47CFR§1.1310 PASS FCC 47CFR§2.1093 PASS FCC 47CFR§2.1091 PASS Tested By: Checked By: Denny Huang Shawn Wen Project Engineer Laboratory Leader Approved By: Stephen Guo Laboratory Manager UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch

REPORT NO.: 4789012724.1-4 Page 5 of 9 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with FCC 47CFR§1.1307(b)(1), FCC 47CFR§1.1310, FCC 47CFR§2.1093, 680106 D01 RF Exposure wireless charging apps v03. 3. FACILITIES AND ACCREDITATION A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1187) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. Has been recognized to perform compliance testing on equipment subject to the Commission's Declaration of Conformity (DoC) and Certification rules IC (Company No.: 21320) Accreditation UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. Certificate has been registered and fully described in a report filed with Industry Canada. The Company Number is 21320. VCCI (Registration No.: G-20019, R-20004, C-20012 and T-20011) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with VCCI, the Membership No. is 3793. Facility Name: Chamber D, the VCCI registration No. is G-20019 and R-20004 Shielding Room B , the VCCI registration No. is C-20012 and T-20011 Note: All tests measurement facilities use to collect the measurement data are located at Building 10, Innovation Technology Park, Song Shan Lake Hi tech Development Zone, Dongguan, 523808, China UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch

REPORT NO.: 4789012724.1-4 Page 6 of 9 4. REQUIREMENT RF EXPOSURE LIMIT Frequency E-field Strength Magnetic Field Power Density Averaging Time Range (E) Strength (H) (S) |E|2, |H|2 or S (MHz) (V/m) (A/m) (mW/cm2) (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f2)* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 METHOD OF MEASUREMENT a) The RF exposure test was performed in shielded chamber. b) The measurement probe was placed at test distance (15cm) which is between the edge of the charger and the geometric centre of probe. c) The measurement probe used to search of highest strength. d) The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. e) The EUT were measured according to the dictates of KDB 680106D01v03. BLOCK DIAGRAM OF TEST SETUP Note: As bottom point is not required to test for desktop devices, so we scanning all the surfaces and recorded the worst level in F. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch

REPORT NO.: 4789012724.1-4 Page 7 of 9 EQUIPMENT APPROVAL CONSIDERATIONS The EUT does comply with KDB 680106D01v03. 1) Power transfer frequency is less than 1 MHz. Yes; the device operate in the frequency range from 326.5kHz. 2) Output power from each primary coil is less than or equal to 15 watts. Yes; the maximum output power of the each primary coil is not exceed 10 watts. 3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Yes; the transfer system includes only single primary and secondary coils. 4) Client device is placed directly in contact with the transmitter. Yes; Client device is placed directly in contact with the transmitter. e) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes; The EUT is a mobile devices. f) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes; The EUT field strength levels are less than 50% of the MPE limit. MEASURING INSTRUMENT USED Equipment Manufacturer Model No. Serial No. Last Cal. Due. Date Electric and Magnetic Field Narda EHP-200A 170WX90204 April 21, 2019 April 21, 2020 Analyzer UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch

REPORT NO.: 4789012724.1-4 Page 8 of 9 H FIELD STRENGTH Test mode for wireless charger: Config Test Mode Description Mode 1 Standby EUT powered by AC/DC adapter EUT and apple watch powered by AC/DC adapter, Mode 2 Normal Operation USB output with 5V2.4A load H-Field Strength at 15 cm from the edges surrounding the EUT and 20cm above the top surface of the EUT (A/m) H-Field Strength Measurement Result Mode 1 Limits Test Position (A/m) A/m A 0.021 1.63 B 0.036 1.63 C 0.023 1.63 D 0.054 1.63 E 0.017 1.63 F 0.025 1.63 H-Field Strength Measurement Result Mode 2 Limits Test Position (A/m) A/m A 0.018 1.63 B 0.026 1.63 C 0.020 1.63 D 0.044 1.63 E 0.014 1.63 F 0.018 1.63 Note 1: ƒ= 326.5kHz UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch

REPORT NO.: 4789012724.1-4 Page 9 of 9 E-Field Strength at 15 cm from the edges surrounding the EUT (V/m) E-Field Strength Measurement Result Mode 1 Limits Test Position (V/m) V/m A 0.08 614 B 0.05 614 C 0.07 614 D 0.10 614 E 0.05 614 F 0.09 614 E-Field Strength Measurement Result Mode 2 Limits Test Position (V/m) V/m A 0.1 614 B 0.07 614 C 0.09 614 D 0.13 614 E 0.06 614 F 0.11 614 Note 1: ƒ= 326.5kHz END OF REPORT UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch


Document Created: 2019-07-13 00:06:03
Document Modified: 2019-07-13 00:06:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC