modular approval letter

FCC ID: 2ATEV-BL3362T-P

Cover Letter(s)

Download: PDF
FCCID_4404999

Hangzhou BroadLink Technology Co., Ltd.
Unit C, Building 1, No.57 Jiang‘er Road, Changhe Street, Binjiang District, Hangzhou, Zhejiang, P.R.China

                              MODULAR APPROVAL LETTER
FCC ID: 2ATEV—BL3362T—P                                                           Date: 2019—08—08
Modular Approval Requirement                                                   Yes            No
(i) The radio elements of the modular transmitter must have                          V
their own shielding. The physical crystal and tuning
capacitors may be located external to the shielded radio
elements.
(ii) The modular transmitter must have buffered                                      ¥
modulation/data inputs (if such inputs are provided) to
ensure that the module will comply with part
15 requirements under conditions of excessive data rates or
over—modulation.
(iii) The modular transmitter must have its own power                                ¥
supply regulation.
(iv) The modular transmitter must comply with the antenna                            w
and transmission system requirements of §§ 15.203,
15.204(b) and 15.204(c). The antenna must either be
permanently attached or employ a "unique" antenna
coupler (at all connections between the module and the
antenna, including the cable). The "professional installation"‘
provision of § 15.203 is not applicable to modules but can
apply to limited modular
approvals under paragraph (b) of this section.
(v) The modular transmitter must be tested in a stand—alone                          V
configuration
(vi) The modular transmitter must be equipped with either a                          V
permanently affixed label or must be capable of
electronically displaying its FCC identification number.
(vii) The modular transmitter must comply with any specific                          V
rules or operating requirements that ordinarily apply to a
complete transmitter and the manufacturer must provide
adequate instructions along with the module to explain any
such requirements. A copy of these instructions must be
included in the application for equipment authorization.
(viii) The modular transmitter must comply with any                                  V
applicable RF exposure requirements in its final
configuration.

Sincerely,




                                                        _NE
Hangzhou BroadLink Technology Co.,                       Ltd.




Mengjiao Yan /PM
                                                     uey



Document Created: 2019-08-24 11:54:35
Document Modified: 2019-08-24 11:54:35

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC