18_UL2QC10CA-SGR RFExp

FCC ID: 2ATCAUL2QC10CA-SGR

RF Exposure Info

Download: PDF
FCCID_4316408

Model: UL20CIICA—SGR Measurement and Test Report For ALOGIC Corporation Pty Ltd. Level 40,140 William Street, Melbourne VIC 3000, Australia FCC ID: 2ATCAULQC10CA—SGR FCC Rule(s): KDB 680106 D01 VO3 Product Description: Ultra Multi Device Wireless & USB Charging Station Tested Model: UL2GC10CA—SGR Report No.: WTX19X04026123W—2 Tested Date: 2019—04—26 Issued Date: 2019—04—28 to 2019—05—20 Tested By: Jason Su / Engineer Ti 4 Jflfih’/u FMa—Chan Reviewed By: Silin Chen / EMC Manager ahie nek Approved & Authorized By: Jandy So / PSQ Manager J”"%W Prepared By: Shenzhen SEM Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bac‘an District, Shenzhen, P.R.C. (518101) Tel.: +86—755—33068908 Fax.: +86—755—33063809 Website: wnw.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ltd. REPORT NO.: WTXI9X04026 123W—2 PAGE 1 OF7 REExposure

Model: UL2QC10CA-SGR TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...............................................................................3 2. RF EXPOSURE TEST REPORT ............................................................................................................................4 2.1 STANDARD APPLICABLE.........................................................................................................................................4 2.2 TEST CONDITIONS ..................................................................................................................................................4 2.3 TEST PROCEDURE ...................................................................................................................................................5 2.4 TEST RESULT..........................................................................................................................................................5 2.4 TEST PHOTOS .........................................................................................................................................................7 REPORT NO.: WTX19X04026123W-2 PAGE 2 OF 7 RFExposure

Model: UL2QC10CA-SGR 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: ALOGIC Corporation Pty Ltd. Address of applicant: Level 40,140 William Street, Melbourne VIC 3000, Australia Manufacturer: CE LINK LIMITED Address of manufacturer: Building M,LiCheng Technology Industrial Zone,GongHe Village,ShaJing Town,ShenZhen City,China General Description of EUT Product Name: Ultra Multi Device Wireless & USB Charging Station Trade Name: ALOGIC Model No.: UL2QC10CA-SGR Adding Model(s): / A653-0905000I Power adapter Input: AC100-240V, 50/60Hz, 1.5A Output: DC9V, 5000mA Note: The test data is gathered from a production sample, provided by the manufacturer. Technical Characteristics of EUT Frequency Range: 110~205kHz Modulation Type: ASK Antenna Type: Coil Antenna Rated Voltage: DC5V/DC 9V (Wireless output) Rated Current: 1A/1.1A (Wireless output) Rated Power: 5W/10W (Wireless output) REPORT NO.: WTX19X04026123W-2 PAGE 3 OF 7 RFExposure

Moiet uLagcioca.sor 2. RF Exposure Test Report 2.1 Standard Applicable According to 5 1.1310 system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level i excess limit for maximum permissible exposure. Trece 1—Lis ron Mecuou Penussoce Exrosne (UPE) Erequency range [Electrc fieldstrength Magnetic ield strength [Po¥er density Inveraging time [ute) (Vm) (Alm) (mwicm?) (minutes) (8) Limits for OccupationallControlled xposure b330 sn 18 "d & ozo Tar aoor sove s Fozwo ara mss 10 & Foo—1 soo van s [1s00—100.000 s s is for General Population/Uncontroled Exposure b3iz en 18 "d zo tsez0 seur Zior oe 5o Fozwo 2s sors o2 zo Foo—1 soo ¥1s00 zo [1s00—100.000 10 El 1=fequency in MFtz = Plane—wave equialent power densty 2.2 Test Con Test Mode Description Remark Power Supply Mode Tw Works Comnect to wiseless loag C SY (ith a adapter mpur orking ‘omect to wircless loa ac roviony . . DCV (with a adapter input o Working Comnect to wireless load ac rovisor) Measurement . I5em Distance: Report No: wixtoxomzetaw2 macea or 7 RiErponre

Model: UL2QC10CA-SGR 2.3 Test Procedure a. The measurement probe was placed at test distance(15 cm for A,B,C,D,F and 20 cm for E) which is between the edge of the charger and the geometric center of probe. b. The highest emission level was recorded at the measurement points(A, B, C, D, E, F). c. The EUT was measured according to the distance of KDB 680106 D01 V03. 2.4 Test Result The EUT dose comply with item 5.2 of KDB 680106 D01V03 1. Power transfer frequency is less that 1 MHz Yes, the device operate in the frequency range from 110kHz to 205kHz. 2. Output power from each primary coil is less than 15 watts Yes, the maximum output power of the primary coil is less than 15W. 3. The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils Yes, the client device includes only single primary coils. 4. Client device is inserted in or placed directly in contact with the transmitter Yes, Client device is placed directly in contact with the transmitter. 5. Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes, It is mobile exposure conditions only. REPORT NO.: WTX19X04026123W-2 PAGE 5 OF 7 RFExposure

Model: UL2QC10CA-SGR 6. The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes, The EUT field strength levels are less than 50% of the MPE limit, refer to test TM1, TM2 list, and the coils can’t transmitted simultaneous. Test Mode: TM1 (with mobile phone) Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) 50% Limit (V/m) Top 7.65 614 307 Bottom 8.11 614 307 Side 1 7.55 614 307 Side 2 7.65 614 307 Side 3 9.24 614 307 Side 4 8.87 614 307 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) 50% Limit (A/m) Top 0.0852 1.63 0.815 Bottom 0.0841 1.63 0.815 Side 1 0.0898 1.63 0.815 Side 2 0.0725 1.63 0.815 Side 3 0.0765 1.63 0.815 Side 4 0.0712 1.63 0.815 s REPORT NO.: WTX19X04026123W-2 PAGE 6 OF 7 RFExposure

Model: UL2QC10CA-SGR Test Mode: TM2 (with mobile phone) Electric Field Emissions Test Position Measure Value (V/m) Limit(V/m) 50% Limit (V/m) Top 8.62 614 307 Bottom 8.41 614 307 Side 1 8.95 614 307 Side 2 9.58 614 307 Side 3 9.32 614 307 Side 4 7.54 614 307 Magnetic Field Emissions Test Position Measure Value (A/m) Limit(A/m) 50% Limit (A/m) Top 0.0832 1.63 0.815 Bottom 0.0841 1.63 0.815 Side 1 0.0933 1.63 0.815 Side 2 0.0711 1.63 0.815 Side 3 0.0756 1.63 0.815 Side 4 0.0769 1.63 0.815 2.4 Test Photos ***** END OF REPORT ***** REPORT NO.: WTX19X04026123W-2 PAGE 7 OF 7 RFExposure


Document Created: 2019-06-12 14:43:17
Document Modified: 2019-06-12 14:43:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC