14_UL2QC10CA-SGR TestRpt 8CC

FCC ID: 2ATCAUL2QC10CA-SGR

Test Report

Download: PDF
FCCID_4316404

I7] Model: UL2QCIICA—SGR FCC Part 18 Measurement and Test Report For ALOGIC Corporation Pty Ltd. Level 40,140 William Street, Melbourne VIC 3000, Australia FCC ID: 2ATCAULQC1OCA—SGR Test Rule(s): ECC Part 18 Product Description: Ultra Multi Device Wireless & USB Charging Station Tested Model: UL20C10CA—SGR Report No.: WTX1 9X040281 23W—1 Sample Receipt Date: 2019—04—26 Tested Date: 2019—05—01 to 2019—05—20 Issued Date: 2019—05—20 1 / Tested By: Jason Su / Engineer JW/U Chan Reviewed By: Silin Chen / EMC Manager " 9 Approved & Authorized By: Jandy So / PSQ Manager J”’(ZW Prepared By: Shenzhen SEM Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bac‘an District, Shenzhen, P.R.C. (518101) Tel.: +86—755—33663808 Fax.: +86—755—33608309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ld. Report No.: WTX 19X04026 123W—I1 Page I of 20 FCC Part 18

Model: UL2QC10CA-SGR TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...............................................................................3 1.2 TEST STANDARDS...................................................................................................................................................4 1.3 TEST METHODOLOGY .............................................................................................................................................4 1.4 TEST FACILITY .......................................................................................................................................................4 1.5 EUT SETUP AND OPERATION MODE ......................................................................................................................5 1.6 MEASUREMENT UNCERTAINTY ..............................................................................................................................5 1.7 TEST EQUIPMENT LIST AND DETAILS .....................................................................................................................6 2. SUMMARY OF TEST RESULTS ...........................................................................................................................7 3. CONDUCTED EMISSIONS ....................................................................................................................................8 3.1 STANDARD APPLICABLE.........................................................................................................................................8 3.2 TEST PROCEDURE ...................................................................................................................................................8 3.3 BASIC TEST SETUP BLOCK DIAGRAM.....................................................................................................................8 3.4 ENVIRONMENTAL CONDITIONS ..............................................................................................................................9 3.5 TEST RECEIVER SETUP ...........................................................................................................................................9 3.6 SUMMARY OF TEST RESULTS/PLOTS ......................................................................................................................9 4. RADIATED EMISSIONS .......................................................................................................................................14 4.1 TEST PROCEDURE .................................................................................................................................................14 4.2 TEST RECEIVER SETUP .........................................................................................................................................14 4.3 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................14 4.4 ENVIRONMENTAL CONDITIONS ............................................................................................................................15 4.5 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................15 Report No.: WTX19X04026123W-1 Page 2 of 20 FCC Part 18

Model: UL2QC10CA-SGR 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: ALOGIC Corporation Pty Ltd. Address of applicant: Level 40,140 William Street, Melbourne VIC 3000, Australia Manufacturer: CE LINK LIMITED Address of manufacturer: Building M,LiCheng Technology Industrial Zone,GongHe Village,ShaJing Town,ShenZhen City,China General Description of EUT Product Name: Ultra Multi Device Wireless & USB Charging Station Trade Name: ALOGIC Model No.: UL2QC10CA-SGR Adding Model(s): / Rated Voltage: DC5V/DC 9V A653-0905000I Power adapter Input: AC100-240V, 50/60Hz, 1.5A Output: DC9V, 5000mA Note: The test data is gathered from a production sample, provided by the manufacturer. Technical Characteristics of EUT Frequency Range: 110~205kHz Antenna Type: Coil Antenna Rated Voltage: DC5V/DC 9V (Wireless output) Rated Current: 1A/1.1A (Wireless output) Rated Power: 5W/10W (Wireless output) Report No.: WTX19X04026123W-1 Page 3 of 20 FCC Part 18

Model: UL2QC10CA-SGR 1.2 Test Standards The tests were performed according to following standards: FCC Part 18 Subpart C: Industrial, Scientific, and medical medical equipment. ANSI C63.4-2014:American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which result in lowering the emission, should be checked to ensure compliance has been maintained. 1.3 Test Methodology All measurements contained in this report were conducted with ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. 1.4 Test Facility FCC – Registration No.: 125990 Shenzhen SEM Test Technology Co., Ltd. Laboratory has been recognized to perform compliance testing on equipment subject to the Commissions Declaration Of Conformity (DOC). The Designation Number is CN5010, and Test Firm Registration Number is 125990. Industry Canada (IC) Registration No.: 11464A The 3m Semi-anechoic chamber of Shenzhen SEM Test Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A. Report No.: WTX19X04026123W-1 Page 4 of 20 FCC Part 18

Mess uiegeimcn.son 1.5 EUT Setup and Operation Mode "Thequimnentundertest (EUT) was configured to messir it highest possble erissio fevel.The testmodes wer adapted secording tothe operation manual foruse, more dexiled desription as ollows TestMode Lise Tes: Mode Deseription Remurk Pover Supply Mode Inpul DG¥ivitnc Tan Wirkess Ouiput 1 aciapter input AC vovsoe Inp DGNivitnc mz Wirkess Ouiput 1 acapter input AC vovsee EUT Cible Lis and Dewils Cable Deseripion Length ) StieedUnstielded With ConWithout Core bCGite u2 Unsickded Witout Forie Auailiny Enuipment istand Detils Manufictirer Moet SernlNumber Apcle mosezcrn 7 Specil Cable it and Devils Cible Desripion Length 0) ShieedUnstielded With ConWithoutCore uspA Cale as Unsviclded Witout Forie usBC Cale as Unstickded Witout Forie 1.6 Measurement Uncertainty Measurement unceriainty Prsmeier Condtiions Uncersiny Condicece Condaciea arsiine +i zen rducted Emisions onduc mreemmmerenn 30—2000iHe +45z08 02—ighe +3 sean Radinted Enissions Radined Logk 433009 élaite +19008 Repou No: wixroxowzerem1 Fagesorco Tecrans

Model: UL2QC10CA-SGR 1.7 Test Equipment List and Details Description Manufacturer Model Serial No. Cal Date Due Date Spectrum Analyzer Agilent E4407B MY41440400 2019-04-30 2020-04-29 Spectrum Analyzer Rohde & Schwarz FSP30 836079/035 2019-04-30 2020-04-29 EMI Test Receiver Rohde & Schwarz ESVB 825471/005 2019-04-30 2020-04-29 Amplifier Agilent 8447F 3113A06717 2019-04-30 2020-04-29 Amplifier C&D PAP-1G18 2002 2019-04-30 2020-04-29 Broadband Antenna Schwarz beck VULB9163 9163-333 2019-05-05 2021-05-04 Horn Antenna ETS 3117 00086197 2019-05-05 2021-05-04 Loop Antenna Schwarz beck FMZB 1516 9773 2019-05-05 2021-05-04 EMI Test Receiver Rohde & Schwarz ESPI 101611 2019-04-30 2020-04-29 L.I.S.N Schwarz beck NSLK8126 8126-224 2019-04-30 2020-04-29 Pulse Limiter Rohde & Schwarz ESH3-Z2 100911 2019-04-30 2020-04-29 Report No.: WTX19X04026123W-1 Page 6 of 20 FCC Part 18

Mess uiegeimcn.son 2. SUMMARY OF TEST RESULTS reeruues besciurnion or Test xesutr Es sor m Conducted Enission Compliont essm Raciied Ertision Compliont Repou No: wixroxowzerem1 Fage7 orco Tecrans

Model: UL2QC10CA-SGR 3. Conducted Emissions 3.1 Standard Applicable According to FCC 18.307(b), the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies shall not exceed the limits in the following tables: Conducted limit (dBμV) Frequency (MHz) Quasi-peak Average 0.15-0.5 66 to 56 56 to 46 0.5-5 56 46 5-30 60 50 3.2 Test Procedure The setup of EUT is according with per ANSI C63.4-2014 measurement procedure. The specification used was with the FCC Part 18.307 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. 3.3 Basic Test Setup Block Diagram Report No.: WTX19X04026123W-1 Page 8 of 20 FCC Part 18

Model: UL2QC10CA-SGR 3.4 Environmental Conditions Temperature: 26 C Relative Humidity: 60 ATM Pressure: 1016 mbar 3.5 Test Receiver Setup During the conducted emission test, the test receiver was set with the following configurations: Start Frequency .................................................. 150 kHz Stop Frequency................................................... 30 MHz Sweep Speed ...................................................... Auto IF Bandwidth ...................................................... 10 kHz Quasi-Peak Adapter Bandwidth ......................... 9 kHz Quasi-Peak Adapter Mode ................................. Normal 3.6 Summary of Test Results/Plots According to the data in this section, the EUT complied with the FCC Part 18C Conducted margin for Any non-ISM frequency device, with the worst margin reading of: -6.79 dB at 0.1660 MHz in the Line, QP detector, TM2 detector, 0.15-30MHz Report No.: WTX19X04026123W-1 Page 9 of 20 FCC Part 18

Model: UL2QC10CA-SGR Test mode: TM1 Polarity: Line No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV) (dBuV) (dB) 1* 0.1500 47.67 10.10 57.77 66.00 -8.23 QP 2 0.1580 24.63 10.10 34.73 55.57 -20.84 AVG 3 0.1740 45.53 10.11 55.64 64.77 -9.13 QP 4 0.4540 23.85 10.27 34.12 46.80 -12.68 AVG 5 0.4700 32.16 10.28 42.44 56.51 -14.07 QP 6 0.4740 25.85 10.28 36.13 46.44 -10.31 AVG Report No.: WTX19X04026123W-1 Page 10 of 20 FCC Part 18

Model: UL2QC10CA-SGR Test mode: TM1 Polarity: Neutral No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV) (dBuV) (dB) 1* 0.1580 47.63 10.10 57.73 65.57 -7.84 QP 2 0.1620 25.28 10.10 35.38 55.36 -19.98 AVG 3 0.4580 31.25 10.27 41.52 56.73 -15.21 QP 4 0.4740 25.84 10.28 36.12 46.44 -10.32 AVG 5 0.7740 14.35 10.41 24.76 46.00 -21.24 AVG 6 0.9020 23.44 10.46 33.90 56.00 -22.10 QP Report No.: WTX19X04026123W-1 Page 11 of 20 FCC Part 18

Model: UL2QC10CA-SGR Test mode: TM2 Polarity: Line No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV) (dBuV) (dB) 1* 0.1660 48.26 10.11 58.37 65.16 -6.79 QP 2 0.1700 27.39 10.11 37.50 54.96 -17.46 AVG 3 0.2980 36.54 10.19 46.73 60.30 -13.57 QP 4 0.3620 20.30 10.23 30.53 48.68 -18.15 AVG 5 0.4780 32.87 10.28 43.15 56.37 -13.22 QP 6 0.4780 28.21 10.28 38.49 46.37 -7.88 AVG Report No.: WTX19X04026123W-1 Page 12 of 20 FCC Part 18

Model: UL2QC10CA-SGR Test mode: TM2 Polarity: Neutral No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV) (dBuV) (dB) 1* 0.1540 48.01 10.10 58.11 65.78 -7.67 QP 2 0.1620 27.08 10.10 37.18 55.36 -18.18 AVG 3 0.4780 31.98 10.28 42.26 56.37 -14.11 QP 4 0.4780 27.36 10.28 37.64 46.37 -8.73 AVG 5 0.7740 13.73 10.41 24.14 46.00 -21.86 AVG 6 1.0060 24.09 10.50 34.59 56.00 -21.41 QP Report No.: WTX19X04026123W-1 Page 13 of 20 FCC Part 18

Model: UL2QC10CA-SGR 4. Radiated Emissions 4.1 Test Procedure The setup of EUT is according with per ANSI C63.4-2014 measurement procedure. The specification used was with the FCC Part 18.305 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. Antenna Tower 1m-4m 3m EUT 0.8m Turntable Table To EMI Receiver Ground Plane 4.2 Test Receiver Setup Frequency :9kHz-30MHz Frequency :30MHz-1GHz Frequency :Above 1GHz RBW=10KHz, RBW=120KHz, RBW=1MHz, VBW =30KHz VBW=300KHz VBW=3MHz(Peak), 10Hz(AV) Sweep time= Auto Sweep time= Auto Sweep time= Auto Trace = max hold Trace = max hold Trace = max hold Detector function = peak Detector function = peak, QP Detector function = peak, AV 4.3 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and the Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading – Corr. Factor The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -6dBV means the emission is 6dBV below the maximum limit for Any non-ISM frequency device. The equation for margin calculation is as follows: Report No.: WTX19X04026123W-1 Page 14 of 20 FCC Part 18

Model: UL2QC10CA-SGR Margin = Corr. Ampl. – FCC Part 18.305 Limit 4.4 Environmental Conditions Temperature: 22 C Relative Humidity: 54  ATM Pressure: 1011 mbar 4.5 Summary of Test Results/Plots According to the data, the EUT complied with the FCC Part 18.305 rule, and had the worst margin of: -29.43dB at 929.0082 MHz in the Horizontal polarization, TM1 mode, 3Meters Report No.: WTX19X04026123W-1 Page 15 of 20 FCC Part 18

Model: UL2QC10CA-SGR Plot of Radiated Emissions Test Data (Below 30MHz) Test mode: TM1 Polarity: X No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV) dB (dBuV) (dBuV) (dB) ( ) (cm) 1 0.0158 64.91 -6.51 58.40 103.50 -45.10 228 100 peak 2 0.0309 67.71 -7.10 60.61 103.50 -42.89 329 100 peak 3 0.0471 63.47 -6.99 56.48 103.50 -47.02 50 100 peak 4 0.0625 61.75 -7.57 54.18 103.50 -49.32 183 100 peak 5 0.1894 46.34 -5.66 40.68 103.50 -62.82 58 100 peak 6 1.4637 43.57 -9.95 33.62 103.50 -69.88 350 100 peak Report No.: WTX19X04026123W-1 Page 16 of 20 FCC Part 18

Model: UL2QC10CA-SGR Plot of Radiated Emissions Test Data ( Above 30MHz) Test mode: TM1 Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 40.1347 35.53 -8.51 27.02 63.50 -36.48 56 100 QP 2 48.1626 34.38 -8.20 26.18 63.50 -37.32 228 100 QP 3 114.9169 39.43 -15.30 24.13 63.50 -39.37 87 100 QP 4 209.3129 41.33 -13.20 28.13 63.50 -35.37 293 100 QP 5 314.3765 41.53 -8.99 32.54 63.50 -30.96 260 100 QP 6 929.0082 32.04 2.03 34.07 63.50 -29.43 177 100 QP Report No.: WTX19X04026123W-1 Page 17 of 20 FCC Part 18

Model: UL2QC10CA-SGR Test mode: TM1 Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 66.4989 44.59 -12.87 31.72 63.50 -31.78 349 100 QP 2 112.9196 37.22 -14.93 22.29 63.50 -41.21 191 100 QP 3 162.0414 42.87 -16.67 26.20 63.50 -37.30 120 100 QP 4 192.4186 39.03 -13.91 25.12 63.50 -38.38 114 100 QP 5 233.3487 41.02 -11.90 29.12 63.50 -34.38 182 100 QP 6 958.7943 29.79 3.09 32.88 63.50 -30.62 282 100 QP Report No.: WTX19X04026123W-1 Page 18 of 20 FCC Part 18

Model: UL2QC10CA-SGR Test mode: TM2 Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 48.3318 35.60 -8.22 27.38 63.50 -36.12 177 100 QP 2 66.4989 36.69 -12.87 23.82 63.50 -39.68 264 100 QP 3 95.4270 33.90 -15.08 18.82 63.50 -44.68 72 100 QP 4 189.7385 44.35 -14.21 30.14 63.50 -33.36 242 100 QP 5 441.7426 32.99 -6.95 26.04 63.50 -37.46 314 100 QP 6 972.3374 29.52 3.38 32.90 63.50 -30.60 285 100 QP Report No.: WTX19X04026123W-1 Page 19 of 20 FCC Part 18

Model: UL2QC10CA-SGR Test mode: TM2 Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 31.1798 36.70 -9.56 27.14 63.50 -36.36 75 100 QP 2 64.8865 46.04 -12.13 33.91 63.50 -29.59 224 100 QP 3 115.3205 39.35 -15.36 23.99 63.50 -39.51 90 100 QP 4 191.7450 45.48 -13.99 31.49 63.50 -32.01 271 100 QP 5 511.8352 34.18 -5.94 28.24 63.50 -35.26 114 100 QP 6 989.5355 29.12 3.88 33.00 63.50 -30.50 206 100 QP ***** END OF REPORT ***** Report No.: WTX19X04026123W-1 Page 20 of 20 FCC Part 18


Document Created: 2019-06-12 14:19:15
Document Modified: 2019-06-12 14:19:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC