User Manual

FCC ID: 2ATC3-H201STSH00

Users Manual

Download: PDF
FCCID_4348816

                                 Smart Host Pro
                               MODEL:H201-ST-SH00



Directory:
1. Product introduction
2. Product list
3. Installation guide
4. Configure wi-fi
5. Product parameters
6. Matters needing attention
7. Technical support
一、product introduction
ZigBee HA wireless communication protocol is adopted, equipped with the global
universal channel 2.4ghz, to achieve 10ms quick response.Crystal glass material,
with 3.5-inch IPS display.Independent and distributed compatible multi-attribute
intelligent host, one APP client can correspond to multiple intelligent hosts.
二、Product list
Before using this product, please check whether the goods in the package are
complete, if there is a lack, please contact the after-sales center.
1 x products
1X product manual
1X product warranty card
1 x certificate
2 x screw
三、Installation guide (drawing sketch)
1. This product is divided into two parts: a. B. Screw plate.
2. Fix the screw plate b on the type 86 universal bottom box with 2 screws.
3. Correctly connect the power line and network line according to the wiring
marking of the bottom box of the host.Note: make sure the power is off
4, install the main body a into the screw plate b, that is, the installation is
completed.
四、Configure Wi-Fi

1. Click "   " to enter the setting interface.
2. Click "WiFi" to select the corresponding network, and then enter the wi-fi
password, and the network will be successfully configured instantly.
五、product parameters
Product size: 96*86*35 (mm)
Power supply: AC 100 ~ 240v power supply 50/60hz
Communication protocol: ZigBee HA
Wireless standard: IEEE 802.15.4 (2.4ghz)
Communication rate: 250Kbps


Standby power: 3W
Working humidity: 5~85% no condensation
Working temperature: - 10 ℃, 50 ℃
Transmission distance: 100M (open environment)
Connection mode: zero - wire
六、Matters needing attention
1、Before installation, the product should be stored in a dustproof, moisture-proof
and mildew-proof environment.
2. Slight fever occurs during the use of this product, which is a normal
phenomenon.
3. Please handle the product with care during installation to avoid scratching and
damaging the surface of the product and affecting the appearance.
4. Remember, live installation is prohibited.
七、Technical support
1、Shenzhen Hwellyi Technology Co. , Ltd,with retained ownership。
2、The contents of this document shall be provided according to the
manufacturing status of the product. If there is any update, no further notice will
be given.
3、If you need to know more about the product and update information, please
visit the official website of the product:www.hwellyi.com
4、For consultation, please call the service hotline of hua yi:400-0085-365




official WeChat ID:HWELLYI


FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed
and used in accordance with the instructions, may cause harmful interference to
radio
communications. However, there is no guarantee that interference will not occur
in a
particular installation. If this equipment does cause harmful interference to radio
or
television reception, which can be determined by turning the equipment off and
on, the
user is encouraged to try to correct the interference by one or more of the
following
measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which
the
receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.



Document Created: 2019-05-24 15:47:03
Document Modified: 2019-05-24 15:47:03

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC