MTi19091807-2E2_MPE 20CM

FCC ID: 2AT7Q-DPF01

RF Exposure Info

Download: PDF
FCCID_4455795

MPE REPORT FCC ID: 2AT7Q-DPF01 Date of issue: Sept. 20, 2019 Report Number: MTi19091807-2E2 Sample Description: Photo Share Frame Model(s): FSM010BLB, FSM010BL, FSM08BLB, FSM08BL, FSM08ESB, FSM010ESB, FSM08ES, FSM010ES Applicant: SWITCHMATE HOME LLC. Address: 6601 OWENS DR STE 250, PLEASANTON, CA94588, UNITE STATES Date of Test: Aug. 01, 2019 to Aug. 14, 2019 Shenzhen Microtest Co., Ltd. http://www.mtitest.com This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 2 of 4 - Report No.: MTi19091807-2E2 TEST RESULT CERTIFICATION Applicant’s name: SWITCHMATE HOME LLC. Address: 6601 OWENS DR STE 250, PLEASANTON, CA94588, UNITE STATES Manufacture's Name: SHENZHEN ALONG ELECTRONICS CO., LTD. Address: NO.35 XIANYUAN INDUSTRIAL PARK,GUSHU COMMUNITY, XIXIANG, BAOAN, SHENZHEN, GUANGDONG, CHINA Product name: Photo Share Frame Trademark: SIMPLYSMARTHOME, Brookstone Model and/or type reference . : FSM010BLB Serial Model ........................... : FSM010BL, FSM08BLB, FSM08BL, FSM08ESB, FSM010ESB, FSM08ES, FSM010ES RF Exposure Procedures ....... : KDB 447498 D01 v06 This device described above has been tested by Shenzhen Microtest Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note：This report is updated the serial model. The test data of the wireless part is based on the original test report MTi19073002-1E2, date 2019-08-14. Tested by: Demi Mu Aug. 14, 2019 Reviewed by: Blue Zheng Sept. 20, 2019 Approved by: Smith Chen Sept. 20, 2019 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 3 of 4 - Report No.: MTi19091807-2E2 RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method Friis transmission formula: Pd= (Pout*G)\ (4*pi*R2) Where Pd= Power density in mW/cm2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1415926 R= distance between observation point and center of the radiator in cm(20cm) Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 4 of 4 - Report No.: MTi19091807-2E2 Measurement Result WIFI: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, Power density limited: 1mW/ cm2 Antenna Type: Wifi Antenna: FPC Antenna; WIFI antenna gain: 3.74dBi R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(3.74/10)=2.37 Tune- Power conducted Evaluation result up Max Antenna density Channel power at 20cm power Limits Freq. modulation tune-up power Gain Power (MHz) (dBm) (dBm) (dBm) (mW) Numeric density(mW/cm2 ) (mW/cm2) Ant A Ant A Ant A Ant A Ant A Ant A 2412 14.82 14±1 15 31.622777 2.37 0.01491 1 2437 802.11b 13.81 14±1 15 31.622777 2.37 0.01491 1 2462 13.71 14±1 15 31.622777 2.37 0.01491 1 2412 13.37 12±1 13 19.952623 2.37 0.00941 1 2437 802.11g 12.58 12±1 13 19.952623 2.37 0.00941 1 2462 12.56 12±1 13 19.952623 2.37 0.00941 1 2412 13.52 13±1 14 25.118864 2.37 0.01184 1 802.11n 2437 12.70 13±1 14 25.118864 2.37 0.01184 1 H20 2462 12.36 13±1 14 25.118864 2.37 0.01184 1 Conclusion: For the max result: 0.01491≤ 1.0 for 1g SAR, No SAR is required. ----END OF REPORT---- Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


Document Created: 2019-09-24 14:45:06
Document Modified: 2019-09-24 14:45:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC