15_RC-01 UserMan-US r1

FCC ID: 2AT7G-RC-01

Users Manual

Download: PDF
FCCID_4413726

RC-01 一、 Basic Features： 1 Ver1.0

1. Bluetooth Transmission 2. Lithium Power Supply 3. 10 Buttons 二、Specification 1. Appearance And Parameters： Operating Voltage 3.7V ~ 4.2V Operating Current Working: less than 10mA; standby: less than 10uA Operating Frequency 2402 ~ 2480MHz Transmission Mode Bluetooth 4.0 BLE Sensor None Buttons 10 Buttons Remote control distance 10 meters Battery 400mAh 3.7V Lithium Polymer Standby Power Standby：less than 20uA Compatibility Compatible With Bluetooth 2.0，3.0，4.0，5.0 Material Plastic Exterior Color Customized Size 120mm*40mm*16.5mm Weight About 39g Charging Voltage 5V Charge Current 200MA USB Micro USB Low-voltage Alarm 3.3V Indicator Light A red light, a blue light ON/OFF Switch One Dormant current：16~20uA Working current：1.0~1.5mA 2. Operational Instruction 1） Bluetooth pairing Turn on the ON/OFF switch, press the POWER button and the OK button for 3 seconds at the same time. When the blue LED flashes quickly, it begins to pair. At this time, the host starts the search scan and makes a connection, and the blue LED stops blinking and stays on.,the pairing is successful. After connecting, press the POWER button to turn off. 2） LED indicator Red light： Low voltage (3.3V): the red LED flashes. Charging: the red LED is on. Fully charged: the red LED is off. Blue light：Wireless status：Fast flashing when pairing, always bright after successful connection 3） Dormant time a) Unpaired state: no operation in 30 seconds; b) Search state: no operation in 150 seconds; c) Connection state: no operation in 1800 seconds. 4） Activation When Bluetooth is in dormancy in connection state, pressing any key to activate the Bluetooth, and the activation time is about 100-200 milliseconds. 2 Ver1.0

3. Button function description Front and side Button Function Usage Page(hex) Usage ID(hex) Remarks Power button; Power Pairing button Volume up 0C E9 Sound+ Volume down 0C EA Sound- Menu 07 65 Menu ↑ Up arrow 07 52 Up ← Left arrow 07 50 Left → Right arrow 07 4F Right ↓ Down arrow 07 51 Down Enter 07 28 Enter（short press） AC_Back 0C 224 Return FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 3 Ver1.0

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 4 Ver1.0


Document Created: 2019-08-26 14:21:10
Document Modified: 2019-08-26 14:21:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC