RF Exposure Report

FCC ID: 2AT7G-GTCOM-LB-02

RF Exposure Info

Download: PDF
FCCID_4399972

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE167628 Page: 1 of 4 RF Exposure Evaluation FCC ID: 2AT7G-GTCOM-LB-02 1. Client Information Applicant : Global Tone Communication Technology Co., Ltd. 1601, 16th Floor, No. 20 Shijingshan Road, Shijingshan District, Address : Beijing,China Manufacturer : Global Tone Communication Technology Co., Ltd. 1601, 16th Floor, No. 20 Shijingshan Road, Shijingshan District, Address : Beijing,China 2. General Description of EUT EUT Name : Language Box Models No. : GTCOM-LB-02 Model N/A : Difference 2.4G: Operation 802.11b/g/n(HT20): 2412MHz~2462MHz Frequency: 802.11n(HT40): 2422MHz~2452MHz Bluetooth 4.1: 2402MHz~2480MHz 802.11b: DSSS(CCK, DQPSK, DBPSK) Product : 802.11g/n: OFDM(BPSK,QPSK,16QAM, Description 64QAM) Modulation Type: BLE: GFSK BT:GFSK (1 Mbps) Pi/4-DQPSK (2 Mbps) 8-DPSK (3 Mbps) Adapter(M120300W330): Power : Input: AC 180-240V, 50/60Hz, 0.8A Supply Output: DC 12V, 3A Connecting : Please refer to the User's Manual I/O Port(S) Note: More test information about the EUT please refer the RF Test Report. TB-RF-074-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE167628 Page: 2 of 4 MPE Calculations for WIFI 1. Antenna Gain: . Model Frequency Range FPC Ant: 2400~2483.5MHz N/A 2dBi 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: 2.4G WIFI&BLE Limit of Conducted Max tune up Power Turn-up ANT Gain Distance Power Power(max) power Density Mode Power (dBi) (cm) Density (dBm) (dBm) 2 (dB) [G] [R] (mW/ cm ) 2 [P] (mW/ cm ) [S] (S) BLE -1.146 -1±1 0 2.0 20 0.0003 1 802.11B 15.48 15±1 16 2.0 20 0.0126 1 802.11G 14.71 14±1 15 2.0 20 0.0100 1 802.11N(HT20) 16.123 16±1 17 2.0 20 0.0158 1 802.11N(HT40) 15.758 15±1 16 2.0 20 0.0126 1 TB-RF-074-1.0

Report No.: TB-MPE167628 Page: 3 of 4 BT BER+EDR Conducted Max tune up ANT Gain Power Turn-up Distance Density Power(max) power (dBi) Mode Power (cm) 2 (dBm) (dBm) Numeric (mW/ cm ) (dB) [R] [P] [G] [S] GFSK 4.946 5±1 6 2.0 20 0.0013 Pi/4-DQPSK 4.564 5±1 6 2.0 20 0.0013 8-DPSK 4.880 5±1 6 2.0 20 0.0013 The worst RF Exposure Evaluation Worst Calculation Value Total Calculation Threshold Value 2.4WiFi Mode Bluetooth Mode Value 0.0158 0.0013 0.0171 1.0 TB-RF-074-1.0

Report No.: TB-MPE167628 Page: 4 of 4 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For BT:2402~2480 MHz For WIFI:2412~2462 MHz MPE limit S: 1mW/ cm2 The MPE is calculated as 0.0171mW / cm2 < limit 1mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-074-1.0


Document Created: 2019-08-15 09:27:17
Document Modified: 2019-08-15 09:27:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC