User Manual

FCC ID: 2AT27-GAN-ROBOT

Users Manual

Download: PDF

FCCID_4383038

GANROBOT

Read carefully before using
Thank you for selecting GAN ROBOT

GAN ROBOT is the first generation of cube robot which launched by GAN ，It can disturb the
cube according to the specified formula by connecting APP and improve the speed competition
level.

Specification
Model GANROBOT product size product 408.5g
152*152*44.8mm
weight
Device IOS 9.0
Android 4.4or
USB adapter 5v 2A connection wireless require above
ment

Must knows
Connecting to APP
Make sure the Cube robot is connected to the power supply and disconnected other devices or
APP ,before each connection
Pleaseconnect with Cube APP, not pair in the Bluetooth list of mobile devices or other application
only

Usage Restrictions
Please use the product follow to the product instruction manual , Any loss and injury caused by
improper operation shall be borne by the user
GAN Robot contains electronic component , Do not dismantle the core to damage it
Do not crash the product avoid from water or high temperature (>60°)
Product contains small parts , NOT suitable for children under 36 months
Charging
Use the adapter and USB cable provided for charging only ,Ensure good condition of them before
connecting to power

FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).

This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.

Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

Document Created: 2019-07-31 12:08:50
Document Modified: 2019-07-31 12:08:50

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC