UM2

FCC ID: 2ASWV-LS02

Users Manual

Download: PDF
FCCID_4427080



Once connected, launch the APP to see live video, track your journey, FaQ change camera settings or download captured footage and photos. Under normal operating conditions, if there is problems with the device, please refer to the following methads to solve. GPS Player Software Installation and Using Instructions Q; Cannot take picture and record If need check the GPS information , the professional player must be A: Please check whether there is enaugh space for of TF card, or if it is installed firstly locked. 1.Please install the customized video player 2.Please copy the customized video player to computer and Install. ; Stopping automatically while recording Using theplayer software: A: Due to the huge amount of HD video data, please use high—speed C10 TF 1.Please open the customized video player and installit for the first time use. card with SDHC compatible, there will be the mark of C10 on the TF card. 2.Cick File —Open to choose the file which need play, and open the play mode Q: There is "wrong file" shown on LCD when replay the photo/video A: Because of TF card storage error, please format your TF card. Q; Fuzzy image A: Please check if the lensstay with dirt, fingerprints, please cleaned lens with paper before shooting. Q; Dark image when when shooting the scene of sky or water 15


This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: - Reorient the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The distance between user and products should be no less than 20cm


Document Created: 2019-08-31 15:39:46
Document Modified: 2019-08-31 15:39:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC