User manual

FCC ID: 2ASRT-HOF23B

Users Manual

Download: PDF
FCCID_4336763

Screeneo Innovation SA Remote Control user’s manual 一、 Application equipment： Home Projector 二、 Hardware Part 1、MCU： RTL8762AG 2、Battery： 2 pcs AAA batteries 3、Indication light： No 4、IR LED： Yes 三、 Compatable operating system 1、Android 4.4+ (or Higher) 2、Windows RT 8.1 (or Higher) 3、Windows 8 (or Higher) 四、 Main function 1. Keypad function Keypad function emit IR code only under condition of IR mode. OK button emits BT code but other buttons emit IR code under condition of BT/Air mouse mode. 2. Air mouse function When press on air mouse button then air mouse function switch on, press on air mouse button again then air mouse function switch off, at the same time button emit IR code. Under condition of air mouse function switch on the “OK”button deem as left button of mouse.If the remote no move for 60 seconds then mouse function switch off then remote control standby to save energy of battery. 五、 Code pairing 1. PPA 5750 Air Mouse Firstly artifically pair code, after blue tooth pairing succeed then RC can pair code automatically. BT remote name: PPA 5750 Air Mouse 2. Pairing keys Pairing buttons: Press on “FOCUS+” and “FOCUS-” keys for more than 3s 六、Switch 1. (Power ON/OFF -- button “POWER”) 公司网址：www.xmhello.com 电话：0592-5657230 Page1

Screeneo Innovation SA This means the remote wakes up when pressing the “Power” button 2. (Bluetooth/Air mouse Switch --- controlled by air mouse button) 七、 Battery energy detection The remote detect the energy of battery, projector server read voltage of remote control via connecting blue tooth. When battery energy is less than 30% the information will be shown on screen of projector to remind user to change battery 八、Key code：（IR keycode、Protocol NEC 0x8019） Key on 红外模式 蓝牙模式 红外键值表 SCH 键位 遥控器按键 IR BT IR Key code 按键描述 Icon on 发送码值及功能 发送码值及功能 格式：NEC (对应原理图 Description Remote 切换 切换 用户码： 上的键位号） 0x8019 S01 DOWN down IR IR, mouse off 16 S05 Gyo-mouse Empty Rat IR mouse on IR mouse off FC S06 MENU menu IR IR 18 S07 BACK BACK IR IR 1A S08 HOME HOME IR IR 19 S12 MUTE MUTE IR IR 1F S13 VOL+ VOL+ IR IR 1C S14 BT BT IR IR 37 S15 GREEN GREEN IR IR 33 S19 YELLOW YELLOW IR IR 34 S20 BLUE BLUE IR IR 35 S21 RED RED IR IR 32 S22 FOCUS - FOCUS - IR IR 1E S26 Auto-Focus Auto-Focus IR IR 31 S27 FOCUS+ FOCUS+ IR IR 48 S28 VOL- VOL- IR IR 46 S29 UP UP IR IR, mouse off 17 S33 RIGHT RIGHT IR IR, mouse off 51 S34 OK OK IR Mouse_left 50 S35 LEFT LEFT IR IR, mouse off 4F S36 OPTION OPTION IR IR 36 S41 POWER POWER IR IR 10 S42 SOURCE SOURCE IR IR 1D 公司网址：www.xmhello.com 电话：0592-5657230 Page2

Screeneo Innovation SA 1. Air mouse function and BT button definition 1） Air mouse button is switch button between IR and BT which emit IR code at same time. 2） OK buttons is left button of mouse under condition of BT mode But under condition of IR mode OK button emit IR code 3）Navigation buttons is switch-off button of mouse Under condition of BT mode navigation buttons can switch off mouse function and emit IR code at the same time. 4）Other buttons always emit IR code Press On Gyro Mouse button: then Gyo-mouse function swith on. Switch Off Gyro Mouse function: Press on Gyo-mouse button or Press on one of the navigation buttons (left, right, up, down.) Switch on Mouse cursor visible, <OK> button acts like left button of a PC mouse, NO IR transmission. Switch off gyro: Mouse cursor not visible, <OK> button resume OK function Via IR transmission. If Mouse no move for more than 60s, mouse function is deactivated. 2. IR buttons definition Protocol：NEC， system code：0x8019， Carrier frequency：37.9kHz±2%。 Code table refer to Page 2-3 公司网址：www.xmhello.com 电话：0592-5657230 Page3

Screeneo Innovation SA 九、The appearance Frequency bands Maximum output power BT BLE(EIRP) -5.18 dBm 公司网址：www.xmhello.com 电话：0592-5657230 Page4

Screeneo Innovation SA CE Statement 1. The operating temperature of the EUT can’t exceed 35℃ and shouldn’t be lower than 5℃. 2. The device complies with RF specifications when the device used at 0mm form your body. Hereby, Screeneo Innovation SA. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states. FCC Statement 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to user. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.For body worn operation, this device has been tested and meets FCC RF exposure guidelines. When used with an accessory that contains metal may not ensure compliance with FCC RF exposure guidelines. 公司网址：www.xmhello.com 电话：0592-5657230 Page5


Document Created: 2019-06-26 10:23:15
Document Modified: 2019-06-26 10:23:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC