Test Report

FCC ID: 2ASPX-FT-330TX

Test Report

Download: PDF
FCCID_4238098

TEST REPORT KOSTEC Co., Ltd. 28(175—20, Annyeong—dong) 406—gil sejaro, Report No.: KST—FCR—190002 Hwaseong—si, Gyeonggi—do, Korea KOSTEC Co., Ltd. hup://www kostec.org Tel:031—222—4251, Fax:031—222—4252 1. Applicant + Name : E—COLLAR TECHNOLOGIES INCORPORATED * Address : 2120 Forrest Park Drive Garrett IN 46738—1882 U.S.A 2. Test Item * Product Name: Finger remote * Model Name: FT—330TX * Brand: None + FCC ID: 2ASPX—FT—330TX 3. Manufacturer + Name : CND MICRO Co.,Ltd * Address : 599, Byeolmang—ro, Danwon—gu, Ansan—si, Gyeonggi—do, South Korea 15438 4. Date of Test : 2019. 03. 07. ~ 2019. 03. 10. FCC CFR 47, Part 15. Subpart C—15.227 5. Test Method Used : ANSI C63.10:2013 6. Test Result : Compliance 7. Note: — Supplementary Information The device bearing the brand name and FCC ID specified above has been shown to comply with the applicable technical standards as indicated in the measurement report and was tested in accordance with measurement procedures specified in ANSI C 63.10—2013. We attest to the accuracy of data and all measurements reported herein were performed by KOSTEC Co., Ltd. and were made under Chief Engineer‘s supervision. We assume full responsibility for the completeness of these measurements and vouch for the qualifications ofall persons taking them. The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report is not related to KOLAS accreditation. Affirmation Tested by __z>—*~ Technical Manager . Name : Lee, Mi—Younnge) Name : Park, Gyeong—Hyeon ignatare) 2019. 03. 22. KOSTEC Co., Ltd. KST—FCR—RFS—Rev.0.4 Page: 1 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 Table of Contents 1. GENERAL INFORMATION .............................................................................................................. 3 1.1 Test Facility ............................................................................................................................................... 3 1.2 Location .................................................................................................................................................... 3 1.3 Revision History of test report .................................................................................................................. 4 2. EQUIPMENT DESCRIPTION ........................................................................................................... 5 3. SYSTEM CONFIGURATION FOR TEST ......................................................................................... 6 3.1 Characteristics of equipment .................................................................................................................... 6 3.2 Used peripherals list ................................................................................................................................. 6 3.3 Product Modification ................................................................................................................................. 6 3.4 Operating Mode ........................................................................................................................................ 6 3.5 Test Setup of EUT .................................................................................................................................... 6 3.6 Used Test Equipment List ......................................................................................................................... 7 3.7 Used Test Cable List................................................................................................................................. 9 4. SUMMARY TEST RESULTS .......................................................................................................... 10 5. MEASUREMENT RESULTS .......................................................................................................... 11 5.1 20 dB Bandwidth .................................................................................................................................... 11 5.2 Spurious RF Radiated emissions & Field strength of fundamental ........................................................ 12 5.3 Antenna requirement .............................................................................................................................. 17 5.4 AC Power Conducted emissions ............................................................................................................ 18 KST-FCR-RFS-Rev.0.4 Page: 2 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 1. GENERAL INFORMATION 1.1 Test Facility Test laboratory and address KOSTEC Co., Ltd. 128(175-20,Annyeong-dong)406-gil sejaro, Hwaseong-si Gyeonggi-do, Korea Registration information KOLAS No. : 232 FCC Designation No. : KR0041 IC Registration Site No. : 8305A-1 1.2 Location KOSTEC Co., Ltd. KST-FCR-RFS-Rev.0.4 Page: 3 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 1.3 Revision History of test report Rev. Revisions Effect page Reviewed Date - Initial issue All Gyeong Hyeon, Park 2019. 03. 22. KST-FCR-RFS-Rev.0.4 Page: 4 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 2. EQUIPMENT DESCRIPTION The product specification described herein was declared by manufacturer. And refer to user’s manual for the details. Equipment Name Finger remote Model No FT-330TX Family model name N/A Usage Finger remote for dog training Serial Number Proto type Modulation type FSK Emission Type F1D Operated Frequency 27.095 MHz Max fundamental field strength 78.80 dBμV /m Channel Number 1 Operation temperature -20 °C ~ 55 °C Power Source DC 3.7 V Battery Antenna Description Special screw type, Monopole Antenna, gain : 0 dBi 1. The device was operating at its maximum output power for all measurements. 2. The radiation measurements are performed in X, Y, Z axis positioning. Only Remark the worst case (X) is shown in the report. 3. The above DUT’s information was declared by manufacturer. Please refer to the specifications or user manual for more detailed description. FCC ID 2ASPX-FT-330TX KST-FCR-RFS-Rev.0.4 Page: 5 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 3. SYSTEM CONFIGURATION FOR TEST 3.1 Characteristics of equipment Finger remote for dog training 3.2 Used peripherals list Description Model No. Serial No. Manufacture Remark 3.3 Product Modification N/A 3.4 Operating Mode Constantly transmitting with a modulated carrier at maximum power. 3.5 Test Setup of EUT EUT (Standalone) KST-FCR-RFS-Rev.0.4 Page: 6 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 3.6 Used Test Equipment List Due to Cal No. Instrument Model S/N Manufacturer used cal date interval 1 T & H Chamber PL-3J 15003623 ESPEC 2019.11.12 1 year 2 T & H Chamber SH-662 93000067 ESPEC CORP 2019.09.28 1 year 3 Spectrum Analyzer 8563EC 3046A00527 Agilent Technology 2020.01.25 1 year 4 Signal Analyzer FSV13 101247 Rohde & Schwarz 2020.01.24 1 year 5 Spectrum Analyzer FSV30 20-353063 Rohde& Schwarz 2020.01.25 1 year 6 Signal Analyzer N9010A MY56070441 Agilent Technologies 2019.05.25 1 year 7 EMI Test Receiver ESCI7 100823 Rohde& Schwarz 2020.01.22 1 year 8 EMI Test Receiver ESI 837514/004 Rohde& Schwarz 2019.09.03 1 year 9 Vector Signal Analyzer 89441A 3416A02620 Agilent Technology 2020.01.25 1 year 10 Network Analyzer 8753ES US39172348 AGILENT 2019.09.03 1 year 11 EPM Series Power meter E4418B GB39512547 Agilent Technology 2020.01.23 1 year 12 RF Power Sensor E9300A MY41496631 Agilent Technology 2020.01.23 1 year 13 Microwave Frequency Counter 5352B 2908A00480 Agilent Technology 2020.01.24 1 year 14 Audio Analyzer 8903B 3514A16919 Agilent Technology 2020.01.23 1 year 15 Audio Telephone Analyzer DD-5601CID 520010281 CREDIX 2020.01.23 1 year 16 Modulation Analyzer 8901A 3041A0576 H.P 2020.01.24 1 year 17 Digital storage Oscilloscope TDS3052 B015962 Tektronix 2019.09.04 1 year 18 ESG-D Series Signal Generator E4436B US39260458 Agilent Technology 2020.01.25 1 year 19 Vector Signal Generator SMBV100A 257557 Rohde & Schwarz 2020.01.25 1 year 20 GNSS Signal Generator TC-2800A 2800A000494 TESCOM CO., LTD. 2020.01.24 1 year 21 Signal Generator SMB100A 179628 Rohde & Schwarz 2019.05.09 1 year 22 SLIDAC None 0207-4 Myoung sung Ele. 2020.01.23 1 year 23 DC Power supply DRP-5030 9028029 Digital Electronic Co.,Ltd 2020.01.23 1 year 24 DC Power supply E3610A KR24104505 Agilent Technology 2020.01.23 1 year 25 DC Power supply UP-3005T 68 Unicon Co.,Ltd 2020.01.23 1 year 26 DC Power Supply SM 3400-D 114701000117 DELTA ELEKTRONIKA 2020.01.22 1 year 27 DC Power supply 6632B MY43004005 Agilent Technology 2020.01.23 1 year 28 DC Power Supply 6632B MY43004137 Agilent Technology 2020.01.23 1 year 29 Termination 1433-3 LM718 WEINSCHEL 2019.07.09 1 year 30 Termination 1432-3 QR946 AEROFLEX/WEINSCHEL 2019.07.09 1 year 31 Attenuator 24-30-34 BX5630 Aeroflex / Weinschel 2019.12.19 1 year 32 Attenuator 8498A 3318A09485 HP 2020.01.24 1 year 33 Step Attenuator 8494B 3308A32809 HP 2020.01.24 1 year 34 RF Step Attenuator RSP 100091 Rohde & Schwarz 2020.01.24 1 year 35 Attenuator 18B50W-20F 64671 INMET 2020.01.24 1 year 36 Attenuator 10 dB 1 Rohde & Schwarz 2019.05.04 1 year 37 Attenuator 10 dB 2 Rohde & Schwarz 2019.05.04 1 year 38 Attenuator 10 dB 3 Rohde & Schwarz 2019.05.04 1 year 39 Attenuator 10 dB 4 Rohde & Schwarz 2019.05.04 1 year 40 Attenuator 54A-10 74564 WEINSCHEL 2019.09.04 1 year 41 Attenuator 56-10 66920 WEINSCHEL 2019.05.09 1 year 42 Attenuator 48-20-11 BV2658 Aeroflex/Weinschel 2019.08.06 1 year 43 Attenuator 48-30-33-LIM BL5350 Weinschel Corp. 2019.07.09 1 year 44 Power divider 11636B 51212 HP 2020.01.28 1 year 45 3Way Power divider KPDSU3W 00070365 KMW 2019.09.03 1 year 46 4Way Power divider 70052651 173834 KRYTAR 2020.01.28 1 year 47 3Way Power divider 1580 SQ361 WEINSCHEL 2019.05.09 1 year 48 OSP OSP120 101577 Rohde & Schwarz 2019.05.04 1 year 49 White noise audio filter ST31EQ 101902 SoundTech 2019.09.04 1 year KST-FCR-RFS-Rev.0.4 Page: 7 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 Due to cal Cal No. Instrument Model S/N Manufacturer used date interval 50 Dual directional coupler 778D 17693 HEWLETT PACKARD 2020.01.24 1 year 51 Dual directional coupler 772D 2839A00924 HEWLETT PACKARD 2020.01.24 1 year 52 Band rejection filter 3TNF-0006 26 DOVER Tech 2020.01.24 1 year 53 Band rejection filter 3TNF-0007 311 DOVER Tech 2020.01.24 1 year 54 Band rejection filter WTR-BRF2442-84NN 09020001 WAVE TECH Co.,LTD 2020.01.24 1 year WRCJV12-5695-5725-5825- 55 Band rejection filter 5855-50SS 1 Wainwright Instruments GmbH 2019.05.04 1 year WRCJV12-5120-5150-5350- 56 Band rejection filter 5380-40SS 4 Wainwright Instruments GmbH 2019.05.04 1 year WRCGV10-2360-2400-2500- 57 Band rejection filter 2540-50SS 2 Wainwright Instruments GmbH 2019.05.04 1 year 58 Band rejection filter CTF-155M-S1 001 RF One Electronics 2019.09.06 1 year 59 Band rejection filter CTF-435M-S1 001 RF One Electronics 2019.09.06 1 year 60 Highpass Filter WHJS1100-10EF 1 WAINWRIGHT 2020.01.24 1 year 61 Highpass Filter WHJS3000-10EF 1 WAINWRIGHT 2020.01.24 1 year WHNX6-5530-7000-26500- 62 Highpass Filter 40CC 2 Wainwright Instruments GmbH 2019.05.09 1 year WHNX6-2370-3000-26500- 63 Highpass Filter 40CC 4 Wainwright Instruments GmbH 2019.05.09 1 year WideBand Radio Communication 64 Tester CMW500 102276 Rohde & Schwarz 2020.01.24 1 year 65 Bluetooth Tester TC-3000B 3000B6A0166 TESCOM CO., LTD. 2020.01.24 1 year 66 Loop Antenna 6502 9203-0493 EMCO 2019.05.29 2 year 67 BiconiLog Antenna 3142B 1745 EMCO 2020.05.10 2 year 68 Biconical Antenna VUBA9117 9117-342 Schwarz beck 2020.03.12 2 year 69 Trilog-Broadband Antenna VULB 9168 9168-606 SCHWARZBECK 2020.09.14 2 year 70 Horn Antenna 3115 2996 EMCO 2020.02.14 2 year 71 Horn Antenna 3115 9605-4834 EMCO 2020.03.12 2 year 72 Horn Antenna BBHA9170 743 SCHWARZBECK 2021.01.22 2 year 73 PREAMPLIFIER(3) 8449B 3008A00149 Agilent 2019.09.05 1 year 74 AMPLIFIER(10) TK-PA6S 120009 TESTEK 2020.01.22 1 year 75 AMPLIFIER TK-PA18 150003 TESTEK 2020.01.24 1 year 76 AMPLIFIER TK-PA1840H 160010-L TESTEK 2020.01.22 1 year 77 AMPLIFIER 8447D 2944A07881 H.P 2020.01.24 1 year KST-FCR-RFS-Rev.0.4 Page: 8 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 3.7 Used Test Cable List Due to cal No. Model S/N Manufacturer Specifications Cal interval used date 1 SMS112-GL200sD-SMS112-1M None GigaLane 9 kHz ~ 26.5 GHz(1 M) 2019.01.02 6 months 2 SMS112-GL200sD-SMS112-1M None GigaLane 9 kHz ~ 26.5 GHz(1 M) 2019.01.02 6 months 3 SMS112-GL200sD-SMS112-1M None GigaLane 9 kHz ~ 26.5 GHz(1 M) 2019.01.02 6 months 4 L-502W None CANARE 9 kHz ~ 3 GHz(1 M) 2019.01.02 6 months 5 L-502W None CANARE 9 kHz ~ 3 GHz(1 M) 2019.01.02 6 months 6 L-502W None CANARE 9 kHz ~ 3 GHz(1 M) 2019.01.02 6 months 7 SUCOFLEX 126E MY2202/26E SUHNER 9 kHz ~ 26.5 GHz(1 M) 2019.01.02 6 months 8 SUCOFLEX 126E MY2203/26E SUHNER 9 kHz ~ 26.5 GHz(1 M) 2019.01.02 6 months 9 SUCOFLEX 126E MY2204/26E SUHNER 9 kHz ~ 26.5 GHz(1 M) 2019.01.02 6 months 10 SUCOFLEX 126E MY2205/26E SUHNER 9 kHz ~ 26.5 GHz(1 M) 2019.01.02 6 months 11 SUCOFLEX 126E MY2206/26E SUHNER 9 kHz ~ 26.5 GHz(1 M) 2019.01.02 6 months 12 SUCOFLEX 126E MY2207/26E SUHNER 9 kHz ~ 26.5 GHz(1 M) 2019.01.02 6 months 13 SUCOFLEX 102 MY5433/2 SUHNER 9 kHz ~ 40 GHz(1 M) 2019.01.02 6 months 14 SUCOFLEX 102 MY5434/2 SUHNER 9 kHz ~ 40 GHz(1 M) 2019.01.02 6 months 15 SUCOFLEX 102 MY5435/2 SUHNER 9 kHz ~ 40 GHz(1 M) 2019.01.02 6 months 16 SUCOFLEX 102 MY5436/2 SUHNER 9 kHz ~ 40 GHz(1 M) 2019.01.02 6 months 17 SUCOFLEX 100 None SUHNER 9 kHz ~ 26.5 GHz(8 M) 2019.01.27 1 year 18 SUCOFLEX 102 801434/2 SUHNER 9 kHz ~ 40 GHz(2 M) 2019.01.02 6 months 19 SUCOFLEX 102 801435/2 SUHNER 9 kHz ~ 40 GHz(2 M) 2019.01.02 6 months 20 SUCOFLEX 102 801436/2 SUHNER 9 kHz ~ 40 GHz(2 M) 2019.01.02 6 months 21 SUCOFLEX 102 801437/2 SUHNER 9 kHz ~ 40 GHz(2 M) 2019.01.02 6 months 22 SUCOFLEX 104 802060/4 SUHNER 9 kHz ~ 26.5 GHz(10 M) 2019.01.02 6 months KST-FCR-RFS-Rev.0.4 Page: 9 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 4. SUMMARY TEST RESULTS Reference Description of Test FCC Rule Used Test Result Clause 20 dB Bandwidth & occupied 15.215(c) Clause 5.1 Compliance Bandwidth Spurious RF radiated emissions & 15.205(a) & 15.209(a) & Clause 5.2 Compliance Field strength of fundamental 15.227(a) Antenna requirement 15.203 Clause 5.3 Compliance AC Power Conducted emissions 15.207 Clause 5.4 Compliance Compliance/pass : The EUT complies with the essential requirements in the standard. Not Compliance : The EUT does not comply with the essential requirements in the standard. N/A : The test was not applicable in the standard. Procedure Reference FCC CFR 47, Part 15. Subpart C-15.227 ANSI C63.10:2013 KST-FCR-RFS-Rev.0.4 Page: 10 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 5. MEASUREMENT RESULTS 5.1 20 dB Bandwidth 5.1.1 Standard Applicable [ FCC §15.215(c)] (c) Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§15.217 through 15.257 and in subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. 5.1.2 Test Environment conditions • Ambient temperature : 21 °C • Relative Humidity : (51 ~ 54) % R.H. 5.1.3 Measurement Procedure The 20 dB bandwidth is measured with a spectrum analyzer connected via a receive antenna placed near the EUT while the EUT is operating in transmission mode. The spectrum analyzer is set to the as follows : • Set RBW = 300 Hz. • Set the video bandwidth (VBW) ≥ 3 x RBW. • Detector = Peak. • Trace mode = max hold. • Sweep = auto couple. • Allow the trace to stabilize. • Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 20 dB relative to the maximum level measured in the fundamental emission. 5.1.4 Measurement Result Frequency 20 dB Bandwidth 99 % Bandwidth Channel Test Results [MHz] [KHz] [KHz] No limit (for - 27.095 9.923 9.740 information only) 5.1.5 Test Plot KST-FCR-RFS-Rev.0.4 Page: 11 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 5.2 Spurious RF Radiated emissions & Field strength of fundamental 5.2.1 Standard Applicable [ FCC §15.227(a)] (a) The field strength of any emission within this band shall not exceed 10,000 microvolts/meter at 3 meters. The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in §15.35 for limiting peak emissions apply. (b) The field strength of any emissions which appear outside of this band shall not exceed the general radiated emission limits in §15.209. §15.209 and RSS-Gen limits for radiated emissions measurements (distance at 3 m) Frequency Band [MHz] DISTANCE [Meters] Limit [μV/m] Limit [dBμV/m] Detector 0.009 ~ 0.490 300 2400/F(kHz) 67.6-20log(F) Peak 0.490 ~ 1.705 30 24000/F(kHz) 87.6-20log(F) Peak 1.705 ~ 30.0 30 30 29.54 Peak 30 - 88 3 100 ** 40.00 Quasi peak 88 - 216 3 150 ** 43.52 Quasi peak 216 - 960 3 200 ** 46.02 Quasi peak Above 960 3 500 54.00 Average Above 1000 3 74.0 dBμV/m (Peak), 54.0 dBμV/m (Average) ** fundamental emissions from intentional radiators operation under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz, or 470-806 MHz. However, operation within these Frequency bands is permitted under other sections of this Part Section 15.231 and 15.241 §15.205. Restrict Band of Operation [MHz] [MHz] [MHz] [GHz] 0.090 - 0.110 16.42 - 16.423 399.9 - 410 4.5 - 5.15 0.495 - 0.505** 16.694 75 - 16.695 25 608 - 614 5.35 - 5.46 2.173 5 - 2.190 5 16.804 25 - 16.804 75 960 – 1 240 7.25 - 7.75 4.125 - 4.128 25.5 - 25.67 1 300 – 1 427 8.025 - 8. 4.177 25 - 4.177 75 37.5 -38.25 1 435 – 1 626.5 9.0 - 9.2 4.207 25 - 4.207 75 73 - 74.6 1 645.5 – 1 646.5 9.3 - 9.5 6.215 - 6.218 74.8 - 75.2 1 660 – 1 710 10.6 - 12.7 6.267 75 - 6.268 25 108 - 121.94 1 718.8 -1 722.2 13.25 - 13.4 6.311 75 - 6.312 25 123 - 138 2 200 – 2 300 14.47 - 14.5 8.291 - 8.294 149.9 - 150.05 2 310 – 2 390 15.35 - 16.2 8.362 - 8.366 156.524 75 - 156.525 25 2 483.5 – 2 500 17.7 - 21.4 8.376 25 - 8.38 6 75 156.7 - 156.9 2 690 – 2 900 22.01 - 23.12 8.414 25 - 8.414 75 162.012 5 - 167.17 3 260 – 3 267 23.6 - 24.0 12.29 - 12.293 167.72 - 173.2 3 332 – 3 339 31.2 - 31.8 12.519 75 - 12.520 25 240 - 285 3 345.8 – 3 358 36.43 - 36.5 12.576 75 - 12.577 25 322 - 335.4 3 600 – 4 400 Above 38.6 13.36 - 13.41 ** Until February 1, 1999, this restricted band shall be 0.490-0.510 KST-FCR-RFS-Rev.0.4 Page: 12 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 5.2.2 Test Environment conditions • Ambient temperature : 21 °C • Relative Humidity : (51 ~ 54) % R.H. 5.2.3 Measurement Procedure The measurements procedure of the Spurious RF Radiated emissions is as following describe method. 1. The EUT was placed on the top of a rotating table (0.8 meters for below 1 GHz and 1.5 meters for above 1 GHz) above the ground at a 3 meter camber. The table was rotated 360 degree to determine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna master. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both Horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotating table was turned from 0 - 360 degrees to find the maximum reading. 5. The measuring receiver was set to peak detector and specified bandwidth with max hold function. 6. Low, Middle and high channels were measured, and radiation measurements are performed in X, Y, Z axis positioning. And found the worst axis position and only the test worst case mode is recorded in the report. • The measurement results are obtained as described below: Result(dBμV/m) = Reading(dBμV) + Antenna factor(dB/m)+ CL(dB) + other applicable factor (dB) • The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for RMS Average (Duty cycle < 98 %) for Average detection (AV) at frequency above 1 GHz, then the measurement results was added to a correction factor (10 log(1/duty cycle)). • The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz (Duty cycle ≥ 98 %) for Average detection (AV) at frequency above 1 GHz. • According to §15.33 (a)(1), Frequency range of radiated measurement is performed the tenth harmonic. 5.2.4 Measurement Uncertainty Radiated Emission measurement: Below 1 GHz: 3.56 dB (CL: Approx 95 %, k=2) Above 1 GHz: 3.60 dB (CL: Approx 95 %, k=2) KST-FCR-RFS-Rev.0.4 Page: 13 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 5.2.5 Test Configuration Radiated emission setup, below 30 MHz 3m 0.8 m 1m Radiated emission setup, below 1 000 MHz 3m 1~4m 0.8 m Radiated emission setup, above 1 GHz Horn Antenna 3m 1~4m 1.5 m KST-FCR-RFS-Rev.0.4 Page: 14 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 5.2.6 Measurement Result Field strength of fundamental Antenna Meas Freq. Detect Reading Table CL Limit Mgn Height Pol. Fctr. Result Result (MHz) Mode (dBμV/m) (Deg) (dB) (dBμV/m ) (dB) (m) (H/V) (dB/m) (dBμV /m) 27.095 PK 71.00 180 1.0 H 7.00 0.79 78.80 100 21.20 Compliance 27.095 AV 49.58 180 1.0 H 7.00 0.79 57.37 80 22.63 Compliance Harmonic Antenna Meas Freq. Reading Table CL AMP Limit Mgn Height Pol. Fctr. Result Result (MHz) (dBμV/m) (Deg) (dB) (dB) (dBμV/m ) (dB) (m) (H/V) (dB/m) (dBμV /m) 54.07 61.59 180 1.0 V 8.13 0.86 -42.41 28.17 40 11.83 Compliance 81.21 54.75 170 1.0 V 6.80 1.13 -42.25 20.42 40 19.58 Compliance 162.61 51.95 190 1.0 V 9.40 1.66 -41.68 21.33 43.5 22.17 Compliance 189.73 68.12 180 1.2 H 9.98 1.77 -41.52 38.35 43.5 5.15 Compliance 216.78 67.71 180 1.2 H 11.04 1.91 -41.44 39.22 46.02 6.8 Compliance 462.34 55.17 170 1.2 H 17.47 3.05 -40.64 35.05 46.02 10.97 Compliance 651.94 43.75 170 1.2 H 20.94 3.78 -39.54 28.94 46.02 17.08 Compliance Note: quasi-peak was used. ※Note • It is not recorded on the report that the reading of emissions are attenuated more than 20 dB below the permissible limits or the field strength is too small to measured. • The transmitter radiated spectrum was investigated from 9 kHz to 1 GHz. KST-FCR-RFS-Rev.0.4 Page: 15 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 5.2.7 Plots Radiated emissions (Below 1 000 MHz) * The worst case only. KST-FCR-RFS-Rev.0.4 Page: 16 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 5.3 Antenna requirement 5.3.1 Standard applicable [ FCC §15.203] For intentional device, according to §15.203, an intentional radiator shall be designed to ensure that no antenna other than furnished by responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that user a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 5.3.2 Antenna details Frequency Band Antenna Type Gain [dBi] Results 27 MHz Monopole antenna 0 Compliance The EUT has a screw-type connector which is a unique antenna coupling. Therefore, The EUT meets the Part15.203 requirement. Antenna KST-FCR-RFS-Rev.0.4 Page: 17 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 5.4 AC Power Conducted emissions 5.4.1 Standard Applicable [ FCC §15.207(a)] For intentional radiator that is designed to be connected to the public utility(AC)power line, the radio frequency. Voltage that is conducted back onto the AC power line on any frequencies hopping mode within the band 150 kHz to 30 MHz shall not exceed the limits in the following table, as measured using a 50 μH/50 ohms line Impedance stabilization network(LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the boundary between the frequency ranges. §15.207 limits for AC line conducted emissions; Conducted Limit (dBμV) Frequency of Emission(㎒) Quasi-peak Average 0.15 ~ 0.5 66 to 56 * 56 to 46 * 0.5 ~ 5 56 46 5 ~ 30 60 50 * Decreases with the logarithm of the frequency 5.4.2 Test Environment conditions • Ambient temperature : 21 °C • Relative Humidity : (51 ~ 54) % R.H. 5.4.3 Measurement Procedure EUT was placed on a non- metallic table height of 0.8 m above the reference ground plane. Cables connected to EUT were fixed to cause maximum emission. Test was made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna was varied in height above the conducting ground plane to obtain the Maximum signal strength. 5.4.4 Used equipment Next Cal Equipment Model No. Serial No. Manufacturer Used cal date interval Test receiver ESCS30 100111 Rohde & Schwarz 2020. 01. 22 1 year Pulse Limiter ESH3-Z2 100097 Rohde & Schwarz 2020. 01. 22 1 year ESH2-Z5 100044 R&S 2020. 01. 22 1 year LISN ESH3-Z5 100147 R&S 2020. 01. 22 1 year *Test Program: “ ESXS-K1 V2.2” Measurement uncertainty 0.15 ~ 30 MHz : ±3.34 (CL: Approx 95 %, k=2) KST-FCR-RFS-Rev.0.4 Page: 18 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 5.4.5 Measurement Result Factor QP CISPR AV Freq. [dB] Limit Reading Result Limit Reading Result POL CABLE [㎒] LISN [㏈㎶] [㏈㎶] [㏈㎶] [㏈㎶] [㏈㎶] [㏈㎶] +P/L 0.224 0.09 9.99 N 62.67 32.38 32.47 52.67 16.85 16.94 0.248 0.08 10.00 L 61.82 40.25 40.33 51.82 29.50 29.58 0.349 0.08 10.01 L 58.99 42.23 42.31 48.99 21.84 21.92 0.447 0.08 10.03 L 56.93 39.10 39.18 46.93 25.12 25.20 0.904 0.10 10.06 L 56.00 41.02 41.12 46.00 23.46 23.56 2.228 0.14 10.08 N 56.00 38.74 38.88 46.00 21.89 22.03 13.431 0.55 10.43 L 60.00 44.51 45.06 50.00 27.27 27.82 * LISN: LISN insertion Loss, Cable: Cable Loss, P/L:pulse limiter factor * L: Line. Live, N: Line. Neutral * Reading: test receiver reading value (with cable loss & pulse limiter factor) * Result = LISN + Reading KST-FCR-RFS-Rev.0.4 Page: 19 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,

Report No.: KST-FCR-190002 Line. Live Line. Neutral KST-FCR-RFS-Rev.0.4 Page: 20 / 20 This report shall not be reproduced except in full without the written approval of KOSTEC Co., Ltd,


Document Created: 2019-04-13 01:42:34
Document Modified: 2019-04-13 01:42:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC