Test report

FCC ID: 2ASNP-E79X3562018

Test Report

Download: PDF
FCCID_4222671

RF Test Report As per RSS-210 Issue 9:2016, Annex B & FCC Part 15 Subpart 15.225:2016 Low Power Licence Exempt Radio Communication Devices Intentional Radiators on the Electronic Lock: E-Plex 7900 Issued by: TÜV SÜD Canada Inc. 2972 Joseph-A-Bombardier Laval, QC, H7P 6E3 Testing produced for Canada Ph: (450) 687-4976 See Appendix A for full client & Abderrahmane EUT details. Ferhat, Project Engineer Registration # 6844B-1 Testing Laboratory Registration # Certificate #2955.02 CA6845 Page 1 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc FCC 15 225 Rev1

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Table of Contents Table of Contents ................................................................................................................... 2 Report Scope .......................................................................................................................... 3 Summary ................................................................................................................................ 4 Test Results Summary ....................................................................................................... 5 Notes, Justifications, or Deviations ................................................................................... 6 Sample Calculation(s) ........................................................................................................ 6 Applicable Standards, Specifications and Methods ............................................................... 7 Document Revision Status ..................................................................................................... 8 Definitions and Acronyms ..................................................................................................... 9 Testing Facility .................................................................................................................... 10 Calibrations and Accreditations ....................................................................................... 10 Testing Environmental Conditions and Dates ................................................................. 11 Detailed Test Results Section .............................................................................................. 12 Emission Mask ................................................................................................................. 13 Carrier Frequency Stability .............................................................................................. 17 Transmitter Spurious Radiated Emissions ....................................................................... 19 20dB and 99% Occupied Bandwidth ............................................................................... 27 Appendix A – EUT Summary.............................................................................................. 31 Appendix B – EUT and Test Setup Photos.......................................................................... 33 Page 2 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Report Scope This report addresses the EMC verification testing and test results of the Electronic Lock: E-Plex 7900, and is herein referred to as EUT (Equipment Under Test). The EUT was tested for compliance against the following standards: RSS-210 Issue 9:2016, Annex B FCC Part 15 Subpart C 15.225:2016 Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. This report does not imply product endorsement by any government, accreditation agency, or TÜV SÜD Canada Inc. Opinions or interpretations expressed in this report, if any, are outside the scope of TÜV SÜD Canada Inc accreditations. Any opinions expressed do not necessarily reflect the opinions of TÜV SÜD Canada Inc, unless otherwise stated. Page 3 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Summary The results contained in this report relate only to the item(s) tested. EUT Electronic Lock: E-Plex 7900 FCC Certification #, FCC ID: 2ASNP-E79X3562018 Industry Canada Certification #, IC: 24793-E79X3562018 EUT passed all tests performed Yes Tests conducted by Abderrahmane Ferhat For testing dates, see "Testing Environmental Conditions and Dates". Page 4 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Test Results Summary Standard/Method Description Class/Limit Result Pass FCC 15.203 Antenna Requirement Unique See Justification Operation within the band FCC 15.225 (a), (b), (c) 13.110-14.010 MHz -- Pass RSS-210 B.6 (Field Strength) Operation within the band FCC 15.225 (e) 13.110-14.010 MHz ±0.01% Pass RSS-210 B.6 (Carrier Frequency Stability) FCC 15.225 (d) Transmitter Spurious FCC 15.209 Quasi-Peak Pass Radiated Emissions RSS-GEN (Table 4) N/A FCC 15.207 Power Line Conducted Quasi-Peak, See RSS-GEN (Table 3) Emissions Average Justification Occupied Bandwidth, FCC 15.215 (c) Lower and Upper 20dB OBW Pass C63.10 Section 6.9 Band Edges RSS-GEN Section 6.6 Occupied Bandwidth 99% OBW Pass Overall Result Pass If the product as tested or otherwise complies with the specification, the EUT is deemed to comply with the requirement and is deemed a ‘PASS’ grade. If not ‘FAIL’ grade will be issued. Note that ‘PASS’ / ‘FAIL’ grade is independent of any measurement uncertainties. A ‘PASS’ / ‘FAIL’ grade within measurement uncertainty is marked with a ‘*’. Page 5 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Notes, Justifications, or Deviations The following notes, justifications for tests not performed or deviations from the above listed specifications apply: For the antenna requirement specified in FCC 15.203, the unit used a custom loop antenna which is also not meant to be replaceable by the user. The EUT does not have an antenna port and a modified module was not provided. All measurements were performed using the radiated method. For the Restricted Bands of operation, the transmitter cover in this report is designed to only operate at 13.56 MHz. Power line conducted emissions were not performed as the EUT is battery operated only. Sample Calculation(s) Radiated Emission Test Margin = Limit – (Received Signal + Antenna Factor + Cable Loss – Pre-Amp Gain) Margin = 50.5dBµV/m – (50dBµV + 10dB + 2.5dB – 20dB) Margin = 8.0 dB (pass) Page 6 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Applicable Standards, Specifications and Methods ANSI C63.4:2014 Methods of Measurement of Radio-Noise Emissions from Low- Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz ANSI C63.10:2013 American National Standard For Testing Unlicensed Wireless Devices CFR 47 FCC 15 Code of Federal Regulations – Radio Frequency Devices, Subpart C:2015 Intentional Radiators RSS-GEN Issue 4 General Requirements and Information for the Certification of 2014 Radio Apparatus RSS-210 Issue Licence-Exempt Radio Apparatus: Category I Equipment 9:2016 ISO 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories Page 7 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Document Revision Status Revision 000 - December 12, 2018 Initial Release Revision 001 – March 17, 2019 Corrected FCC ID and IC numbers. Page 8 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Definitions and Acronyms The following definitions and acronyms are applicable in this report. See also ANSI C63.14. AE – Auxiliary Equipment. A digital accessory that feeds data into or receives data from another device (host) that in turn, controls its operation. BW – Bandwidth. Unless otherwise stated, this is refers to the 20 dB bandwidth. EMC – Electro-Magnetic Compatibility. The ability of an equipment or system to function satisfactorily in its electromagnetic environment without introducing intolerable electromagnetic disturbances to anything in that environment. EMI – Electro-Magnetic Immunity. The ability to maintain a specified performance when the equipment is subjected to disturbance (unwanted) signals of specified levels. EUT – Equipment Under Test. A device or system being evaluated for compliance that is representative of a product to be marketed. ITE – Information Technology Equipment with a primary function(s) of entry, storage, display, retrieval, transmission, processing, switching, or control, of data. LISN – Line Impedance Stabilization Network NCR – No Calibration Required RF – Radio Frequency Page 9 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Testing Facility Testing for EMC on the EUT was carried out at TÜV SÜD Canada testing lab in Laval, near Montréal, Québec, Canada. The testing lab has a calibrated 3m semi-anechoic chamber which allows measurements on an EUT that has a maximum width or length of up to 2m and a height of up to 3m. The chamber is equipped with a turntable that is capable of testing devices up to 3300lb in weight. This facility is capable of testing products that are rated for 120Vac and 240Vac single phase, or devices that are rated for a 208Vac 3 phase input. DC capability is also available for testing. The chamber is equipped with a mast that controls the polarization and height of the antenna. Control of the mast occurs in the control room adjoining the shielded chamber. Radiated emission measurements are performed using a BiLog antenna and a Horn antenna where applicable. Conducted emissions, unless otherwise stated, are performed using a LISN and using the Vertical Ground plane if applicable. For ESD testing, the HCP is 1.6m x 0.8m and the VCP is 0.5m x 0.5m. The reference ground plane, when applicable, is 1.6m x 1.6m. Calibrations and Accreditations The 3m semi-anechoic chamber is registered with Federal Communications Commission (FCC, CA6845) and Industry Canada (IC, 6844B-1). This chamber was calibrated for Normalized Site Attenuation (NSA) using test procedures outlined in ANSI C63.4 "Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz". The chamber is lined with ferrite tiles and absorption cones to minimize any undesired reflections. The NSA data is kept on file at TÜV SÜD Canada. For radiated susceptibility testing, a 16 point field calibration has been performed on the chamber. The field uniformity data is kept on file at TÜV SÜD Canada. TÜV SÜD Canada Inc is accredited to ISO 17025 by A2LA with Testing Certificate #2955.02. The laboratory's current scope of accreditation listing can be found as listed on the A2LA website. All measuring equipment is calibrated on an annual or bi- annual basis as listed for each respective test. Page 10 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Testing Environmental Conditions and Dates Following environmental conditions were recorded in the facility during time of testing Temperature Humidity Pressure Date Test Initials (ºC) (%) (kPa) 2018-06-29 Radiated Emissions AF 20 – 24 40 – 51 98.0 – 102.0 2018-07-04 2018-09-07 Carrier Frequency Stability AF 20 - 25 30 - 45 99 - 101 Page 11 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Detailed Test Results Section Page 12 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Emission Mask Purpose The purpose of this test is to ensure that the RF energy emitted from the EUT does not exceed the limits listed below as defined in the applicable test standard, as measured from a receiving antenna. This helps protect other devices which may be using the same spectrum allocations for similar or other purposes and also ensures the transmit range of the device is within the pre-determined suitable range. This also ensures public safety by not exceeding a level which has been deemed safe for human exposure. Limits and Method The limits are defined in FCC Part 15.225 (a), (b), (c) and RSS-210 B.6. The field strength of any emissions within the bands given in the table below shall not exceed the limits specified. Method is using a loop antenna and converting to voltage based on the impedance of free space. Frequency Range Limit (uV/m)1 Limit (dBuV/m)1 (MHz) at 30m at 3m 13.110 - 13.410 106 80.5 13.410 - 13.553 334 90.5 13.553 - 13.567 15,848 124.0 13.567 - 13.710 334 90.5 13.710 - 14.010 106 80.5 1 Limit is with a Quasi-Peak detector with bandwidths as defined in CISPR-16-1-1 Based on ANSI C63.4 Section 4.2, if the Peak detector measurements do not exceed the Quasi-Peak limits, where defined, then the EUT is deemed to have passed the requirements. In accordance with FCC Part 15, section 15.31(f)(2), testing was performed at a 3 meter test distance and an extrapolation factor of 40 dB/decade was applied. For example, an extrapolation of 30m to 3m is 20Log(uV/m) + 40Log(30m/3m). Page 13 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Typical Radiated Emissions Setup Measurement Uncertainty The expanded measurement uncertainty is calculated in accordance with CISPR 16-4-2 and is ±4.25dB for 30MHz – 1GHz and ±4.93dB for 1GHz – 18GHz with a 'k=2' coverage factor and a 95% confidence level. Preliminary Graphs The graphs shown below are maximized peak measurement graphs over a full 0-360°. The loop was orientated at 0 degrees and 90 degrees and a maximized reading is shown. To obtain the maximum emission, the loop antenna is positioned with its plane vertical and rotated about its vertical axis at the maximum azimuth position. This is then repeated with its plane horizontal, and rotated about the horizontal axis. The maximum obtained emission is presented. Page 14 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Peak Emission Mask Page 15 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Final Measurements dBµA => Ant. Emission Results Detect. Received Atten Cable Pre- Level Freq. dBµV Factor Limit Margin Pass/ Peak/ Signal Factor Factor Amp (dBµV/ (MHz) conversion (dB/ (dBµV/ (dB) Fail QP (dBµV) (dB) (dB) (dB) m) Factor m) m) 13.56 Peak 46.6 3 0.4 51.5 -13.9 -31.6 56 124 68 Pass 13.4253 Peak 22.8 3 0.4 51.5 -13.9 -31.6 32.2 90.5 58.3 Pass 13.4487 Peak 23.2 3 0.4 51.5 -13.9 -31.6 32.6 90.5 57.9 Pass 13.6785 Peak 23.2 3 0.4 51.5 -13.9 -31.6 32.6 90.5 57.9 Pass 13.7073 Peak 23.7 3 0.4 51.5 -13.9 -31.6 33.1 90.5 57.4 Pass 13.1334 Peak 21.8 3 0.4 51.5 -13.9 -31.5 31.3 80.5 49.2 Pass Note: Peak = Peak measurement QP = Quasi-Peak measurement See 'Appendix B – EUT and Test Setup Photos' for photos showing the test set-up and EUT axis. Test Equipment List Last Next Calibration / Calibration / Equipment Model No. Manufacturer Asset # Verification Verification Date Date Spectrum ESU-40 Rohde & Schwarz 2017-04-20 2019-04-20 4092 Analyzer Loop Antenna EM 6879 Electro-Metrics 2017-04-19 2019-04-19 4040 Attenuator 3 dB FP-50-3 Trilithic NCR NCR 4028 LNA pre-amp LNA-1450 RF Bay Inc. 2017-07-22 2019-07-22 4089 LMR-400- RF Cable 10m 10M-50OHM- LexTec NCR NCR 4025 MN-MN LMR-400-7M- RF Cable 7m 50OHM-MN- LexTec NCR NCR 4026 MN Emission 0.1.97 Global EMC NCR NCR 58 software Page 16 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Carrier Frequency Stability Purpose The purpose of this test is to ensure that the RF energy intentionally emitted from the EUT does not exceed the permitted bandwidth or level during extreme temperature variations. This helps protect radio broadcasts and receivers with spectrum nearby to the equipment under test from unwanted interference. This also helps ensure proper reception of the intended signal by ensuring the transmit frequency is correct over the expected temperature range. Limits and Method The limits are as defined in FCC Part 15, Section 15.225 (e) and RSS-210 B.6. The frequency tolerance of the carrier signal shall be maintained within ±0.01% of the operating frequency over a temperature variation of −20°C to +50°C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. Results The EUT passed the requirements. Carrier signal remained within ±0.01% of the operating frequency. Voltage, Measured Deviation Deviation Temperature Frequency Result (MHz) (%) (V), (°C) (MHz) Ambient (25) 13.559199 6, -20 13.559279 -0.000080 -0.00059 Pass 6, -10 13.559279 -0.000080 -0.00059 Pass 6, 0 13.559199 0.000000 0 Pass 6, 20 13.559199 0.000000 0 Pass 6, 35 13.559199 0.000000 0 Pass 6, 50 13.559199 0.000000 0 Pass 4.5, 20 13.559199 0.000000 0 Pass 6.5, 20 13.559199 0.000000 0 Pass Frequency Tolerance Table Page 17 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Test Equipment List Last Next Calibration / Calibration / Equipment Model No. Manufacturer Asset # Verification Verification Date Date Spectrum Rohde & ESU-40 2017-04-20 2019-04-20 4092 Analyzer Schwarz Loop Antenna EM 6879 Electro-Metrics 2017-04-19 2019-04-19 4040 Conditioning GD-32-3-3 rtp russells 2017/01/14 2019/01/14 4099 Chamber Page 18 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Transmitter Spurious Radiated Emissions Purpose The purpose of this test is to ensure that the RF energy unintentionally emitted from the EUT does not exceed the limits listed below as defined in the applicable test standard, as measured from a receiving antenna. This helps protect broadcast radio services such as television, FM radio, pagers, cellular telephones, emergency services, and so on, from unwanted interference. Limits and Method The limits are as defined in FCC Part 15, Section 15.209(a) and 15.225(d). The method is as defined in ANSI C63.10. Frequency Limit at 3m (dBuV/m) 0.009 MHz – 0.490 MHz 128.5 to 93.81 0.490 MHz – 1.705 MHz 73.8 to 631 1.705 MHz – 30 MHz 69.51 30 MHz – 88 MHz 40.01 88 MHz – 216 MHz 43.51 216 MHz – 960 MHz 46.01 Above 960 MHz 54.01 Above 1000 MHz 54.02 Above 1000 MHz 74.03 1 Limit is with a Quasi Peak detector with bandwidths as defined in CISPR-16-1-1 except for the frequency bands 9-90 kHz, 110-490 kHz and above 1000 MHz where an Average detector is used. 2 Limit is with 1 MHz measurement bandwidth and using an Average detector 3 Limit is with 1 MHz measurement bandwidth and using a Peak detector Based on ANSI C63.4 Section 4.2, if the Peak detector measurements do not exceed the Quasi-Peak limits, where defined, then the EUT is deemed to have passed the requirements Page 19 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Typical Radiated Emissions Setup Measurement Uncertainty The expanded measurement uncertainty is calculated in accordance with CISPR 16-4-2 and is ±4.25dB for 30MHz – 1GHz and ±4.93dB for 1GHz – 18GHz with a 'k=2' coverage factor and a 95% confidence level. Preliminary Graphs The graphs shown below are obtained at a 3m test distance and are maximized peak measurement graphs measured with a resolution bandwidth greater than or equal to the final required detector over a full 0-360°. This peaking process is done as a worst case measurement and enables the detection of frequencies of concern for final measurement. For final measurements with the appropriate detector, where applicable, please refer to the tables under Final Measurements. In accordance with FCC Part 15, Subpart A, Section 15.33(a), the device is scanned to at least the 10th harmonic (A minimum of 135.6 MHz). Devices scanned may be scanned at alternate test distances, and in accordance with FCC Part 15, Subpart A, Section 15.31(f), an extrapolation factor of 20 dB/decade was used above 30 MHz and 40 dB/decade below 30 MHz. For example, an extrapolation of 30m to 3m for frequencies below 30MHz is 20Log(uV/m) + 40Log(30m/3m). Page 20 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 9 kHz – 150 kHz Page 21 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 150 kHz – 30 MHz Page 22 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 30 MHz – 1 GHz Horizontal - Peak Emission Graph Page 23 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 30 MHz – 1 GHz Vertical - Peak Emission Graph Page 24 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Final Measurements The EUT passed. Supply Battery 4x1.5Vdc Detector Received Antenna Atten Cable Pre- Level QP QP Freq. Pass/ Peak/ Signal Factor Factor Factor Amp (dBµV Limit Margin (MHz) Fail QP (dBµV) (dB/m) (dB) (dB) (dB) /m) (dB) (dB) Horizontal Antenna Polarization 197.007 QP 38.2 10.9 3 1.4 -33.3 20.2 43.5 23.3 Pass 189.045 QP 37.2 10.6 3 1.3 -33.3 18.8 43.5 24.7 Pass 830.954 QP 23.5 23 3 2.7 -32.7 19.5 46.4 26.9 Pass 387.9 QP 30.9 16.8 3 1.9 -33.3 19.3 46.4 27.1 Pass 371.393 QP 33.4 16.2 3 1.8 -33.3 21.1 46.4 25.3 Pass 349.352 QP 35.1 16.3 3 1.8 -33.3 22.9 46.4 23.5 Pass Vertical Antenna Polarization 40.6807 QP 52.4 12.3 3 0.6 -32.9 35.4 40 4.6 Pass 172.733 QP 44.4 9.6 3 1.3 -33.4 24.9 43.5 18.6 Pass 427.807 QP 35.1 17.6 3 1.9 -33.3 24.3 46.4 22.1 Pass 76.3153 QP 42.9 7.5 3 0.8 -33.4 20.8 40 19.2 Pass 146.808 QP 40.1 9.3 3 1.1 -33.4 20.1 43.5 23.4 Pass 431.982 QP 34.5 17.5 3 1.9 -33.3 23.6 46.4 22.8 Pass Note: Peak = Peak measurement QP = Quasi-Peak measurement Page 25 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Test Equipment List Last Next Calibration / Calibration / Equipment Model No. Manufacturer Asset # Verification Verification Date Date Spectrum Rohde & ESU-40 2017-04-20 2019-04-20 4092 Analyzer Schwarz BiLog Antenna 3142-E ETS 2016-11-16 2018-11-16 4002 Horn Antenna ATH1G18G AR 2017-04-25 2019-04-25 4003 Biconical EM-6913 Electro-Metrics 2017-05-02 2019-05-02 4060 Antenna Log Periodic LPA-25 Electro-Metrics 2017-04-20 2019-04-20 4087 Antenna Loop Antenna EM 6879 Electro-Metrics 2017-04-19 2019-04-19 4040 Attenuator 3 dB FP-50-3 Trilithic NCR NCR 4028 LNA pre-amp LNA-1450 RF Bay Inc. 2017-07-22 2019-07-22 4089 1-26.5GHz 8449B Agilent 2017-09-09 2019-09-09 4006 preamp LMR-400- RF Cable 10m 10M-50OHM- LexTec NCR NCR 4025 MN-MN LMR-400-7M- RF Cable 7m 50OHM-MN- LexTec NCR NCR 4026 MN Emission 0.1.97 Global EMC NCR NCR 58 software FCC - 15.209 - Radiated Emissions_Rev1 Page 26 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 20dB and 99% Occupied Bandwidth Purpose The purpose of this test is to verify that intentional radiators operating under the alternative provisions to the general emission limits are designed to ensure the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. This helps ensure the utilization of the frequency allocation and prevent corruption of data by ensuring adequate data separation to distinguish the reception of the intended information. Limits and Method The limit is as specified in FCC Part 15.215(c) and RSS-GEN Section 6.6 and the method is given in ANSI C63.10. Frequency Band: FMIN = 13.110 MHz and FMAX = 14.010 MHz Results The EUT passed. The 20dB BW measured from FLOW to FHIGH was within the specified FMIN and FMAX. The 99% BW was measured using the 99% BW function of the spectrum analyzer. Carrier Frequency 20dB 99% Bandwidth (MHz) Bandwidth (kHz) (kHz) 13.56 435.096 728.365 Page 27 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Graphs The graphs showed below shows the OBW during the operation of the device. This is measured by a max hold on the spectrum analyzer and the highest resolution bandwidth that is sufficiently low to exhibit the bandwidth of the channel during operation of the EUT. Max hold is performed for a duration of not less than 1 minute. 20dB Bandwidth Page 28 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 99% Bandwidth Page 29 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Test Equipment List Last Next Calibration / Calibration / Equipment Model No. Manufacturer Asset # Verification Verification Date Date Spectrum ESU-40 Rohde & Schwarz 2017-04-20 2019-04-20 4092 Analyzer Loop Antenna EM 6879 Electro-Metrics 2017-04-19 2019-04-19 4040 Attenuator 3 dB FP-50-3 Trilithic NCR NCR 4028 LNA pre-amp LNA-1450 RF Bay Inc. 2017-07-22 2019-07-22 4089 LMR-400- RF Cable 10m 10M-50OHM- LexTec NCR NCR 4025 MN-MN LMR-400-7M- RF Cable 7m 50OHM-MN- LexTec NCR NCR 4026 MN Emission 0.1.97 Global EMC NCR NCR 58 software Page 30 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Appendix A – EUT Summary Page 31 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 For further details for filing purposes, refer to filing package. General EUT Description E-Plex 7900 locks with HiD iClass Credentials of SeoS, Classic and Elite. This electronic door lock implements iClass RFID credentials to grant access. Note the EUT is considered to have been received the date of the commencement of the first test, unless otherwise stated. Page 32 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client dormakaba USA Inc Product Electronic Lock: E-Plex 7900 RSS-210 Issue 9:2016, Annex B Standard(s) FCC Part 15 Subpart 15.225:2016 Appendix B – EUT and Test Setup Photos Refer to Test Setup exhibit for EUT and Test Setup photos. Page 33 of 33 Report Issued: 3/17/2019 Report File #: 7169003484B-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc


Document Created: 2019-03-17 23:28:37
Document Modified: 2019-03-17 23:28:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC