Users Manual

FCC ID: 2ASMPBIT0109

Users Manual

Download: PDF
FCCID_4298386

Bicycle Interface Module User Manual
Revision 1.5, May 9 2019


Introduction
The bicycle interface module is responsible for user access to an eBike. Authentication, state
and location is communicated to backend systems via a cellular connection. The unit also
displays the status of the bicycle and it’s available battery to the user.


Operation
The bicycle interface module is located on the rear fender and looks like this to the user:




The bike interface module features a battery level indicator, icons indicating if the bike is
locked or unlocked, and LED ring lights. A user is able to activate a bike by interacting with the
interface module in two ways. Either directly via NFC transit card or by scanning the applicable
QR code in the Lyft app.




                                                                                                 1


Accessory List
No accessories are to be used with this device.


Safety Precautions
The module is not user serviceable. Do not open the bicycle interface module unless you are
explicitly authorized to do so and trained on how to do so by Lyft personnel.


Operating Conditions
The device is intended for use between -20​o​ C (-4​o​ F) and 50​o​ C (122​o​ F)
Electrical Supply:
 Parameter                 Typical

 Input Voltage             36V

 Operating Current         0.3A Max

 Power Draw                10W Max




NOTICE:
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
        (1) this device may not cause harmful interference, and
        (2) this device must accept any interference received, including interference that may cause
             undesired operation.

Changes or modifications made to this equipment not expressly approved by Lyft may void the FCC
authorization to operate this equipment.

Radiofrequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 cm between the
radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.




                                                                                                       2



Document Created: 2019-09-02 06:46:17
Document Modified: 2019-09-02 06:46:17

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC