Users Manual

FCC ID: 2ASK3SC-2061T

Users Manual

Download: PDF

SAFETY WARNINGS!                                                                                                                                                                                                            FCC Part 15 C Notice
• Improper use of batteries may lead to overheating, breakage or leaking.                                                                                                                                                   CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
 - Do not mix old and new batteries.                                                                                                                                                                                        could void the user’s authority to operate the equipment.
 - Do not mix different battery brands.                                                                                                                                                                                     NOTE: This equipment has been tested and found to comply with the limits for a Class C digital device,
 - Install batteries with correct polarity. The flat side (negative terminal) of the battery should rest
                                                                                                                          Limited 90-Day Warranty                                                        NORTH AMERICA      pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
     against the spring.                                                                                                                                                                                                    harmful interference in a residential installation. This equipment generates, uses and can radiate radio
    - Remove dead batteries immediately.
                                                                                                                          AMAX Group USA warrants to the original consumer that this product is free from any               frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
    - Avoid liquids, which can short circuit the batteries.
                                                                                                                          electrical or mechanical defects for a period of 90 DAYS from the date of purchase. If any such   interference to radio communications. However, there is no guarantee that interference will not occur in a
    - The truck or remote will become unresponsive when batteries are low, at which point you should replace              defect is discovered within the warranty period, AMAX Group USA will repair or replace the        particular installation. If this equipment does cause harmful interference to radio or television reception,
     all batteries with new ones.                                                                                         unit free of charge upon receipt of the unit, shipped postage prepaid and insured to our          which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
    - Remove the batteries if you will not use the truck for a long time.                                                 warranty center. The warranty covers normal consumer use and does not cover damage that           interference by one or more of the following measures:
•    Avoid using near furniture or glass to prevent damage to these objects.                                              occurs in shipment or failure that results from alterations, accident, misuse, abuse, neglect,    • Reorient or relocate the receiving antenna.
•    Do not play on roads.                                                                                                wear and tear, inadequate maintenance, commercial use or unreasonable use of the unit.            • Increase the separation between the equipment and receiver.
•    Do not play in crowded areas to avoid injury or damage. Choose a safe location away from traffic.                    Removal of any parts/components voids all warranties. This warranty does not cover cost of        • Connect the equipment into an outlet on a circuit different
•    Do not use truck during a storm or when lightning or thunder are present.                                            repairs made or attempted outside by third-party individuals or companies. Any applicable           from that to which the receiver is connected.
•    Do not use in a wet , sandy or muddy environment as truck may become damaged.                                        implied warranties, including warranties of merchantability and fitness, are hereby limited to    • Consult the dealer or experienced radio/TV technician for help.
                                                                                                                          90 DAYS from the date of purchase. Consequential or incidental damages resulting from a
•    Do not modify or attempt to replace the built-in original antenna on the remote or truck. Doing so will damage the
                                                                                                                          breach of any applicable express or implied warranties are hereby excluded. Some states do
                                                                                                                                                                                                                            This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
     set and affect operation.                                                                                            not allow limitations on the duration of implied warranties and do not allow exclusion of
                                                                                                                                                                                                                            (1) this device may not cause harmful interference, and
•    Do not pull on any wires that are part of the truck. Such action may cause the wires to break and the truck          incidental or consequential damages, so the above limitations and exclusions in these             (2) this device must accept any interference received, including interference that may cause undesired
     to malfunction.                                                                                                      instances may not apply.                                                                          operation.
•    Keep fingers, hair and clothes away from the truck’s spinning tires. Failure to do so may result in
     physical injury.                                                                                                     REPAIR/REPLACE PRODUCT                                                                            INDUSTRY CANADA NOTICE: CANADA ONLY.
•    Never aim the truck at other people.                                                                                 If your product begins to malfunction or stop working, immediately email our warranty             This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
•    Do not throw the truck or purposely hit it with any object.                                                          center at the email listed below. If it is determined that a return is necessary, our warranty    following two conditions: (1) this device may not cause interference, and (2) this device must accept any
•    Store truck in a cool environment, away from high-temperature sources such as fires, stoves, radiators, etc.         department will issue you an RMA number/form and an address to the nearest return center          interference, including interference that may cause undesired operation of the device.
•    This truck has no user-serviceable parts. Do not attempt to modify components or circuit board.                      for shipping the product to. IMPORTANT NOTICE: We will reject all returns that are not            Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
                                                                                                                          accompanied by an issued RMA form and number so make sure to contact our warranty                 licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
                                                                                                                          center before attempting to return your product!                                                  brouillage, et (2) l'utilisateur de l'appareil doit accepter dout brouillage radioélectrique subi, même si le
                                                                                                                                                                                                                            brouillage est susceptible d'en compromettre le fonctionnement.
                                                                                                                          PREPARATION FOR SHIPPING YOUR PRODUCT
                                                                                                                          Please repack your product in a durable box, preferably in the original carton, and send it       CAN ICES-3 (B)/NMB-3(B)
                                                                                                                          prepaid, and adequately insured. Include the RMA form that was issued by our warranty             This product meets the applicable Innovation, Science and Economic Development Canada technical
                                                                                                                          department along with your daytime telephone number and email address inside the                  specifications.
                                                                                                                          shipping carton. If your warranty has expired, contact our warranty center for charged service.   Ce produit répond aux spécifications techniques pertinentes d'Innovation, Science et Développement
                                                                                                                          For further information please send all inquiries to:                                             économique applicables.
                                                                                                                          customercare@amaxbrands.com


                                                                                                                                                      IMPORTANT NOTICE!
                                                                                                                           DO NOT ATTEMPT TO SHIP YOUR PRODUCT BACK WITHOUT FIRST
                                                                                                                              CONTACTING OUR WARRANTY DEPARTMENT BY EMAIL AT:
                                                                                                                                                    customercare@amaxbrands.com                                                                                                                                                                                       INSTRUCTION MANUAL
                                                                                                                                                                                                                                                                                                                                                   Thank you for choosingPOWER CRAZE™. With proper care, your new
                                                                                                                                                                                                                                                                                                                                             POWER CRAZE™ will provide you with many hours of enjoyment. Please read this
                                                                                                                                                                                                                                                                                                                                            instruction manual completely before using the product for the first time, and then
                                                                                                                                                                                                                                                                                                                                                         keep this manual in a handy place for future reference.

                                                                                                                                                                                                                             Conforms to safety requirements of ASTM, FCC,RSS210 and CPSIA.



                                                                                                                                                                                                                                                                                                                                                                                    8
                                                                                                                                                                                                                             This product is manufactured by Amax Group
                                                                                                                                                                                                                             12645 Memorial Drive Suite F1 #388 Houston, TX 77024
                                                                                                                                                                                                                             Power Craze™ is the registered trademark of Amax Group                                        Made in China    CA
                                                                                                                                                                                                                             2008 All rights reserved. Visit us at www.amaxbrands.com                                         CT-2022
                                                                                                                                                                                                                                                                                                                                                                       Colors and styles may slightly vary.


PACKAGE CONTENTS                                                                                             2. Install batteries into the remote control.                                                                         SYNCING YOUR POWER CRAZE™
• POWER CRAZE™ High Speed RC Truck                                                                           Using the enclosed screwdriver to open the battery                                                                    Your POWER CRAZE™ features an automatic 2.4G channel selection system that allows up to 8 people to
• Remote control
                                                                                                             cover on the remote control (see diagram D). Insert 2
                                                                                                                                                                                                                                   race side by side in the same wireless range.                                                                   STEERING WHEEL TRIM ADJUSTMENT
                                                                                                             AA batteries (not included) into the battery
• USB charger                                                                                                compartment, matching polarity (+ and -) marked                                                                       For One Player:
• Screwdriver                                                                                                inside. Replace the battery cover and scure it.                                                                       1. Before starting, make sure that the power on both your remote control and truck are in the OFF                                                       If the Truck can not go forward straightly you may need adjust the
                                                                                                                                                                                                                                     position. Make sure that there are no other 2.4G devices in the area.                                                                                 steering wheel trim on the bottom of the truck from time to time
                                                                                                                                                                                                                                   2. Turn ON the truck and set it down on a flat surface the head light will turn on.                                                                     until the truck can go forward straight. (see diagram E)




                                                                                                                                                                                                 AA
CHARGING THE BATTERY




                                                                                                                                                                                            AA
                                                                                                                                                                                                                                   3. Turn ON the remote control. When the remote control's power indicator turn on, pull the throttle all
1. Turn off the Power Craze™ then insert the charging plug into the truck charging socket on the bottom.                                                                                                                             the way down, your truck and remote control should synced. If pairing fails, repeat steps 1-3.
   The charging plug fits only one way. Dot not force it (see illustration A,B).                                                                                                                                                   For Multiple Players:
                                                                                                                                                                                      BATTERIES NOT INCLUDED (2XAA)
2. Connect the USB end of the cable to your computers USB port or a USB wall charger (see diagram C) ,                                                                                                                             1. Before starting, make sure that the power on all trucks and controllers are in the OFF position.                            E
   The Red CHARGE indicator light turns OFF to show that charging is in progress.                              TRUCK DIAGRAM                                                                          D
                                                                                                                                                                                                                                     Make sure that there are no other 2.4G devices in the area.
3. Average charging time is approximately 30-35 minutes (via 5.0V 2A USB wall charger). The truck                                                                                                                                  2. Each person will have to sync a truck individually at a different time to avoid interference.
   operates for approximately 13-15 minutes on full charge.                                                                                                                                                                          Follow steps 1 to 3 above, making sure to keep away from other people while also making sure that
4. The red charging indicator turns on when the battery is fully charged.                                                          Shell                                                                                             no one else is syncing at the same time.
                                                                                                                                                                                                                                   3. After syncing, leave the truck ON until all players have synced their trucks.
Note: Periodically examine the charger for external damage. External damage to the charger may result                                                                                                                              4. If there is interference, all players must turn off their controllers and trucks and restart the syncing
                                                                                                                           Rubber Locker
                                                                                                                                                                                                                                     process.
in the risk of fire, electric shock, or injury to persons. Never use a damaged adapter.
                                                                                                                                                                                                                                                                                                                                                                                                   WARNING
                                                                                                           Head                                                                                                                                                                                                                                                              DO NOT USE TRUCK IN CLIMATE WEATHER!
                                                                                                           Lights                                                                                                                  OPERATION
                                                                                                                                                                                                                                   1. Turn your truck on:
                                                                                                                                                                                                                      Steering
                                                                                                                                                                                                                      Wheel trim   • Fully charged your Power Craze™ and install 2 fresh AA batteries into the controller.
                                                                                                                                                                                                                                   • Sync your truck and remote control and set the truck on the ground.

                                                                                                                                                                                                                                   2. Driving your truck:
                                                                              Arrow
                                                                                                                                   Tire                                                                                            • Pull the throttle halfway to drive forward at low speed. Pull the throttle fully to drive at high speed.      TROUBLESHOOTING
                                                                                                                                                                                                                                   • Push the throttle forward to make truck move in reverse.                                                      Before sending your truck in for repair, please check for a solution below.
                                                                              Mark                                                                                   Charging                                                      • Turn the steering control to the counterclockwise to turn the truck left. Turn steering to the clockwise to
                                                                                                                                                                     Socket                                                                                                                                                                                       Problem                                 Possible Cause(s)                                  Solution
                                                                                                                                                                                                                                     turn the truck right.
                                                                                                                                                                                                                                   • To break or quickly stop simply pull or push the throttle in the opposite direction.                           Truck will not move.                    Weak batteries; no batteries                  Install new batteries in remote control and
                                                                                                                                                             ON/OFF Switch                                                                                                                                                                                                                                                                recharge the truck.

                                                                                                                                                                                                                                   SPEED MODE SWITCH                                                                                                Truck does not respond properly to      Truck and remote not synced properly          Refer to sync section and re-sync your truck
                         A                                          B                                          REMOTE DIAGRAM                                                                                                      You can drive your Power Craze™ in low and high speed. Simply push the Speed Mode Switch to right, the           remote control.                                                                       and remote.
                                                                                                                                                                                                                                                                                                                                                                                            Another RC truck may be transmitting on the   Move to a new location where no other RC
                                                                                                                                                                                                                                   Power Craze™ speed change to high speed mode.                                                                                                            same radio frequency                          trucks are present.

                                                                                                                                                                                                                                                                                                                                                    Truck loses connection to remote        Using truck in a small enclosed area          Move outdoors to a large open area.
                                                                                                                                                                                                                                   THROTTLE TRIM                                                                                                    control.                                Using truck indoors
                                                                                                                                                                                                                                   If your Power Craze™ automatically go forward or backward, you need adjust the Throttle Trim to proper                                                                                                 Install new batteries in remote control or
                                                                                                                     Speed Mode Switch                                                                                             postion to keep the Power Craze™ stay.
                                                                                                                                                                                                                                                                                                                                                                                            Low batteries in transmitter or vehicle
                                                                                                                                                                                                                                                                                                                                                                                                                                          recharge your truck.
          Red                                                                                                                                                                    Steering Wheel
          Charging                                                                                                        ON/ OFF Switch                                        Throttle Trim                                                                                                                                                       Truck battery has fully charged, but    Driving truck for too long at high speeds,
          Light                                                                                                                                                                                                                                                                                                                                                                             causing motor to overheat                     Turn truck off for 10-15 minutes.
                                                                                                                          Power Indicator                                                                                                                                                                                                           slower than normal.

                                                                                                                                                                                 Throttle


                         c



Document Created: 2019-05-03 17:12:45
Document Modified: 2019-05-03 17:12:45

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC