User Manual -5

FCC ID: 2ASK3PL-0305R

Users Manual

Download: PDF
FCCID_4322990

PART REPLACEMENT INSTRUCTIONS REPLACING THE UPPER ROTOR BLADE CONTENTS: (1) upper rotor blade set x1 (3) connecting rods x4 Diagram Diagram (2) bottom rotor blade set x1 (4) screws x4 3 4 AIR COMBAT PROPELLER SYSTEM Using a screwdriver turn counterclock- Remove the broken blade and Your Air Combat propeller system is a precision instrument that may need repair or replacement from wise to remove the screw. carefully replace with a new one. time to time for optimal flight function. Crash landing from high-speed aerial flights may damage your Air Combat rotor blades or connecting rods. TROUBLESHOOTING: Diagram Diagram If your Air Combat loses its ability to fly correctly, inspect the propeller system carefully for the 5 6 following two common issues: 1. Replacing The Connecting Rod: The connecting rod is a small “handcuff” style device that stabilizes the “upper” rotors. There is one connecting rod on the upper rotor. Please see Diagram 1. Using the screwdriver turn When you tighten the screw you should If a connecting rod is broken or missing simply replace it by removing the existing broken unit and clockwise to tighten the screw. test the blade to make sure that it still replacing it with a new one. You may have to use slight pressure when reattaching both ends of the has free movement. If the blade cannot move freely, slightly loosen the screw. new connecting rod. Make sure that the new connecting rod is secured and locked in place. See Upper Blade Diagram 2. Make sure there is no damage to the actual blade or arm that holds the connecting rod in Diagram place. If there is, you must replace the entire blade system. 7 2. Replacing The Upper and Bottom rotor blades: The rotor is subject to damage as you learn to properly fly and control your Air Combat. If after a crash your helicopter has loss of control or flies erratically you should carefully inspect your entire propeller system for any sign of damage. Most Please note the design common are cracked or chipped blade, broken connecting rod, and frozen balance bar (this is when of the upper blade. the balancing bar and blade are jammed and can not move freely up and down). See diagrams 3 REPLACING THE BOTTOM ROTOR BLADE through 12. Diagram Diagram 8 9 REPLACING CONNECTING RODS Using a screwdriver turn counterclock- Remove the broken blade and Diagram 1 wise to remove the screw. carefully replace with a new one. Diagram Diagram 10 11 There is one connecting Broken connecting rod Broken connecting rod rod on the upper rotor. Using the screwdriver turn When you tighten the screw you should clockwise to tighten the screw. test the blade to make sure that it still Diagram 2 has free movement. If the blade cannot move freely, slightly loosen the screw. Diagram 12 Bottom Blade Please note the design of Replacing connecting rod Proper connection the bottom blade. 7 8


Document Created: 2019-06-18 16:11:10
Document Modified: 2019-06-18 16:11:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC