Test report-DTS

FCC ID: 2ASH5Q2

Test Report

Download: PDF
FCCID_4458210

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : GTS20190801006-1-5 FCC ID. ............................................ : 2ASH5Q2 Compiled by ( position+printed name+signature) .. : File administrators Tracy Hu Supervised by ( position+printed name+signature) .. : Test Engineer Moon Tan Approved by ( position+printed name+signature) .. : Manager Simon Hu Date of issue ..................................... : Sep. 17, 2019 Representative Laboratory Name .: Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Address ............................................ : Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong Applicant’s name ............................ : SHENZHEN POINT ELECTRONICS TECH CO.,LTD Building 3, Shangyuan Industrial Zone, Liantang, Gongming, Address ............................................ : Guangming District, Shenzhen, China Test specification ...........................: FCC Part 15.247: Operation within the bands 902-928 MHz, Standard ........................................... : 2400-2483.5 MHz and 5725-5850 MHz TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: IP Camera Trade Mark ....................................... : N/A Manufacturer .................................... : SHENZHEN POINT ELECTRONICS TECH CO.,LTD Model/Type reference....................... : Q2 Listed Models .................................. : N/A Operation Frequency ........................ : From 2412MHz to 2462MHz Rating ............................................... : DC 7.4V form battery Result................................................ : PASS

Report No.: GTS20190801006-1-5 Page 2 of 31 TEST REPORT Sep. 17, 2019 Test Report No. : GTS20190801006-1-5 ____________________________________________________________________________________ Date of issue Equipment under Test : IP Camera Model /Type : Q2 Listed Models : N/A Applicant : SHENZHEN POINT ELECTRONICS TECH CO.,LTD Address : Building 3, Shangyuan Industrial Zone, Liantang, Gongming, Guangming District, Shenzhen, China Manufacturer : SHENZHEN POINT ELECTRONICS TECH CO.,LTD Address : Building 3, Shangyuan Industrial Zone, Liantang, Gongming, Guangming District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory.

Report No.: GTS20190801006-1-5 Page 3 of 31 Contents 1. TEST STANDARDS ......................................................................................................................................4 2. SUMMARY ....................................................................................................................................................5 2.1. General Remarks 5 2.2. Product Description 5 2.3. Equipment Under Test 5 2.4. Short description of the Equipment under Test (EUT) 5 2.5. EUT operation mode 5 2.6. Block Diagram of Test Setup 6 2.7. Related Submittal(s) / Grant (s) 6 2.8. Special Accessories 6 2.9. Modifications 6 3. TEST ENVIRONMENT ..................................................................................................................................7 3.1. Address of the test laboratory 7 3.2. Test Facility 7 3.3. Environmental conditions 7 3.4. Test Description 8 3.5. Statement of the measurement uncertainty 9 3.6. Equipments Used during the Test 10 4. TEST CONDITIONS AND RESULTS .........................................................................................................11 4.1. Radiated Emission 11 4.2. Maximum Peak Output Power 16 4.3. Power Spectral Density 19 4.4. 6dB Bandwidth 22 4.5. Band Edge Compliance of RF Emission 25 4.6. Antenna Requirement 30 5. TEST SETUP PHOTOS OF THE EUT .......................................................................................................31 6. EXTERNAL AND INTERNAL PHOTOS OF THE EUT ..............................................................................31 6.1. External photos of the EUT 31 6.2. Internal photos of the EUT 31

Report No.: GTS20190801006-1-5 Page 4 of 31 1. TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 DTS Meas Guidance v05r02: Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under §15.247.

Report No.: GTS20190801006-1-5 Page 5 of 31 2. SUMMARY 2.1. General Remarks Date of receipt of test sample : Sep. 10, 2019 Testing commenced on : Sep. 16, 2019 Testing concluded on : Sep. 17, 2019 2.2. Product Description Product Name: IP Camera Trade Mark: / Model/Type reference: Q2 Power supply: DC 7.4V form battery WIFI WLAN Supported 802.11 b/g/n Modulation Type IEEE 802.11b: DSSS(CCK,DQPSK,DBPSK) IEEE 802.11g: OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n HT20: OFDM (64QAM, 16QAM, QPSK,BPSK) IEEE 802.11n HT40: OFDM (64QAM, 16QAM, QPSK,BPSK) Operation frequency IEEE 802.11b:2412-2462MHz IEEE 802.11g:2412-2462MHz IEEE 802.11n HT20:2412-2462MHz IEEE 802.11n HT40:2422-2452MHz Channel number 11 Channels for WIFI 20MHz Bandwidth(802.11b/g/n-HT20) 7 Channels for WIFI 40MHz Bandwidth(802.11n-HT40) Antenna Description External Antenna, 1.0dBi(Max.) 2.3. Equipment Under Test Power supply system utilised Power supply voltage : ○ 230V / 50 Hz ○ 120V / 60Hz ○ 12 V DC ○ 24 V DC ● Other (specified in blank below) DC 7.4V form battery 2.4. Short description of the Equipment under Test (EUT) This is a IP Camera. For more details, refer to the user’s manual of the EUT. 2.5. EUT operation mode The application provider specific test software to control sample in continuous TX and RX (Duty Cycle >98%) for testing meet KDB558074 test requirement.

Report No.: GTS20190801006-1-5 Page 6 of 31 IEEE 802.11b/g/n: Thirteen channels are provided to the EUT. Channel Frequency(MHz) Channel Frequency(MHz) 1 2412 8 2447 2 2417 9 2452 3 2422 10 2457 4 2427 11 2462 5 2432 6 2437 7 2442 2.6. Block Diagram of Test Setup EUT DC 7.4V 2.7. Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended for FCC ID: 2ASH5Q2 filing to comply with Section 15.247 of the FCC Part 15, Subpart C Rules. 2.8. Special Accessories Serial Manufacturer Description Model Certificate Number -- -- -- -- -- 2.9. Modifications No modifications were implemented to meet testing criteria.

Report No.: GTS20190801006-1-5 Page 7 of 31 3. TEST ENVIRONMENT 3.1. Address of the test laboratory Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong 3.2. Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS (No. CNAS L8169) Shenzhen Global Test Service Co., Ltd. has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC 17025: 2017 General Requirements) for the Competence of Testing and Calibration Laboratories. A2LA (Certificate No. 4758.01) Shenzhen Global Test Service Co., Ltd. has been assessed by the American Association for Laboratory Accreditation (A2LA). Certificate No. 4758.01. 3.3. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Temperature: 15-35 °C Humidity: 30-60 % Atmospheric pressure: 950-1050mbar

Report No.: GTS20190801006-1-5 Page 8 of 31 3.4. Test Description Test Test Test Recorded Specification Test case Pass Fail NA NP Remark Mode Channel In Report clause Lowest Lowest Antenna §15.247(b)(4) 802.11b Middle 802.11b Middle complies gain Highest Highest 802.11b 802.11b Power Lowest Lowest 802.11g 802.11g §15.247(e) spectral Middle Middle complies 802.11n HT20 802.11n HT20 density Highest Highest 802.11n HT40 802.11n HT40 Spectrum 802.11b 802.11b Lowest Lowest bandwidth 802.11g 802.11g §15.247(a)(2) Middle Middle complies – 6 dB 802.11n HT20 802.11n HT20 Highest Highest bandwidth 802.11n HT40 802.11n HT40 802.11b 802.11b Maximum Lowest Lowest 802.11g 802.11g §15.247(b)(1) output Middle Middle complies 802.11n HT20 802.11n HT20 power Highest Highest 802.11n HT40 802.11n HT40 802.11b 802.11b Band edge 802.11g Lowest 802.11g Lowest §15.247(d) compliance complies 802.11n HT20 Highest 802.11n HT20 Highest conducted 802.11n HT40 802.11n HT40 802.11b 802.11b Band edge 802.11g Lowest 802.11g Lowest §15.205 compliance complies 802.11n HT20 Highest 802.11n HT20 Highest radiated 802.11n HT40 802.11n HT40 TX 802.11b 802.11b Lowest Lowest spurious 802.11g 802.11g §15.247(d) Middle Middle complies emissions 802.11n HT20 802.11n HT20 Highest Highest conducted 802.11n HT40 802.11n HT40 TX 802.11b 802.11b Lowest Lowest spurious 802.11g 802.11g §15.247(d) Middle Middle complies emissions 802.11n HT20 802.11n HT20 Highest Highest radiated 802.11n HT40 802.11n HT40 RX spurious §15.109 -/- -/- -/- -/- complies emissions radiated TX spurious §15.209(a) Emissions 802.11b -/- 802.11b -/- complies radiated < 30 MHz Conducted §15.107(a) Emissions 802.11b -/- 802.11b -/- complies §15.207 < 30 MHz Remark: 1. The measurement uncertainty is not included in the test result. 2. NA = Not Applicable; NP = Not Performed Preliminary tests were performed in different data rate to find the worst radiated emission. The data rate shown in the table below is the worst-case rate with respect to the specific test item. Investigation has been done on all the possible configurations for searching the worst cases. The following table is a list of the test modes shown in this test report.

Report No.: GTS20190801006-1-5 Page 9 of 31 Test Items Mode Data Rate Channel Maximum Peak Conducted Output Power 11b/DSSS 1 Mbps 1/7/11 Power Spectral Density 11g/OFDM 6 Mbps 1/7/11 6dB Bandwidth Spurious RF conducted emission 11n(20MHz)/OFDM 6.5Mbps 1/7/11 Radiated Emission 9kHz~1GHz& Radiated Emission 1GHz~10th Harmonic 11n(40MHz)/OFDM 13.5Mbps 3/7/11 11b/DSSS 1 Mbps 1/11 11g/OFDM 6 Mbps 1/11 Band Edge 11n(20MHz)/OFDM 6.5Mbps 1/11 11n(40MHz)/OFDM 13.5Mbps 3/9 3.5. Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to CISPR 16 - 4 „Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC Measurements“ and is documented in the Shenzhen Global Test Service Co.,Ltd quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for Shenzhen GTS laboratory is reported: Measurement Test Range Notes Uncertainty Radiated Emission 30~1000MHz 4.10 dB (1) Radiated Emission 1~18GHz 4.32 dB (1) Radiated Emission 18-40GHz 5.54 dB (1) Conducted Disturbance 0.15~30MHz 3.12 dB (1) (1) This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2.

Report No.: GTS20190801006-1-5 Page 10 of 31 3.6. Equipments Used during the Test Calibration Calibration Test Equipment Manufacturer Model No. Serial No. Date Due Date LISN R&S ENV216 3560.6550.08 2019/09/05 2020/09/04 LISN R&S ESH2-Z5 893606/008 2019/09/05 2020/09/04 By-log Antenna SCHWARZBECK VULB9163 000976 2019/09/05 2020/09/04 EMI Test Receiver R&S ESCI 101102 2019/09/05 2020/09/04 Spectrum Analyzer Agilent N9020A MY48010425 2019/09/05 2020/09/04 Spectrum Analyzer R&S FSV40-N 101800 2019/09/05 2020/09/04 Controller EM Controller EM Electronics N/A 2019/09/05 2020/09/04 1000 Double Ridged Horn Antenna SCHWARZBECK BBHA 9120D 01622 2019/09/05 2020/09/04 (1~18GHz) Double Ridged Horn Rohde&Schwarz HF907 100265 2019/09/05 2020/09/04 Antenna Active Loop Antenna SCHWARZBECK FMZB1519 1519-037 2019/09/05 2020/09/04 Horn Antenna ETS 3116 00086467 2018/12/29 2019/12/28 (18GHz~40GHz) Amplifier EMCI EMC2654045 980028 2019/09/05 2020/09/04 (26.5GHz~40GHz) Amplifier EMCI EMC012645SE 980355 2019/09/05 2020/09/04 (0.1GHz~26.5GHz) Temperature/Humidi Gangxing CTH-608 02 2019/09/05 2020/09/04 ty Meter 9SH10- High-Pass Filter K&L 2700/X12750- N/A 2019/09/05 2020/09/04 O/O 41H10- High-Pass Filter K&L 1375/U12750- N/A 2019/09/05 2020/09/04 O/O Data acquisition Agilent U2531A TW53323507 2019/09/05 2020/09/04 card Power Sensor Agilent U2021XA MY5365004 2019/09/05 2020/09/04 RF Cable HUBER+SUHNER RG214 N/A 2019/09/05 2020/09/04 Broadband Antenna SCHWARZBECK VULB 9163 00976 2019/09/05 2020/09/04 Conducted ES-K1 V1.71 N/A N/A N/A Emission Radiated Emission JS32-RE V2.5.0.9 N/A N/A N/A Note: The Cal.Interval was one year.

Report No.: GTS20190801006-1-5 Page 11 of 31 4. TEST CONDITIONS AND RESULTS 4.1. Radiated Emission TEST CONFIGURATION Frequency range 9 KHz – 30MHz Turntable Loop antenna EUT 3m Test 0.8 m Receiver Ground Plane Coaxial Cable Frequency range 30MHz – 1000MHz 3m Turntable 1m to 4m EUT Test Receiver 0.8m m Ground Plane Coaxial Cable Frequency range above 1GHz-25GHz

Report No.: GTS20190801006-1-5 Page 12 of 31 TEST PROCEDURE 1. The EUT was placed on a turn table which is 0.8m above ground plane when testing frequency range 30MHz –1GHz;the EUT was placed on a turn table which is 1.5m above ground plane when testing frequency range 1GHz – 25GHz. 2. Maximum procedure was performed by raising the receiving antenna from 1m to 4m and rotating the turn table from 0° to 360° to acquire the highest emissions from EUT. 3. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 4. Repeat above procedures until all frequency measurements have been completed. 5. Radiated emission test frequency band from 30MHz to 25GHz. 6. The distance between test antenna and EUT as following table states: Test Frequency range Test Antenna Type Test Distance 9KHz-30MHz Active Loop Antenna 3 30MHz-1GHz Ultra-Broadband Antenna 3 1GHz-18GHz Double Ridged Horn Antenna 3 18GHz-25GHz Horn Anternna 1 7. Setting test receiver/spectrum as following table states: Test Frequency range Test Receiver/Spectrum Setting Detector 9KHz-150KHz RBW=200Hz/VBW=3KHz,Sweep time=Auto QP 150KHz-30MHz RBW=9KHz/VBW=100KHz,Sweep time=Auto QP 30MHz-1GHz RBW=120KHz/VBW=1000KHz,Sweep time=Auto QP Peak Value: RBW=1MHz/VBW=3MHz, Sweep time=Auto 1GHz-40GHz Peak Average Value: RBW=1MHz/VBW=10Hz, Sweep time=Auto Field Strength Calculation The field strength is calculated by adding the Antenna Factor and Cable Factor and subtracting the Amplifier Gain and Duty Cycle Correction Factor(if any) from the measured reading. The basic equation with a sample calculation is as follows: FS = RA + AF + CL - AG Where FS = Field Strength CL = Cable Attenuation Factor (Cable Loss) RA = Reading Amplitude AG = Amplifier Gain AF = Antenna Factor Transd=AF +CL-AG RADIATION LIMIT For intentional device, according to § 15.209(a), the general requirement of field strength of radiated emission from intentional radiators at a distance of 3 meters shall not exceed the following table. According to § 15.247(d), in any 100kHz bandwidth outside the frequency band in which the EUT is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the100kHz bandwidth within the band that contains the highest level of desired power. The pre-test have done for the EUT in three axes and found the worst emission at position shown in test setup photos. Frequency (MHz) Distance Radiated (dBμV/m) Radiated (μV/m) (Meters) 0.009-0.49 3 20log(2400/F(KHz))+40log(300/3) 2400/F(KHz) 0.49-1.705 3 20log(24000/F(KHz))+ 40log(30/3) 24000/F(KHz) 1.705-30 3 20log(30)+ 40log(30/3) 30 30-88 3 40.0 100 88-216 3 43.5 150 216-960 3 46.0 200 Above 960 3 54.0 500

Report No.: GTS20190801006-1-5 Page 13 of 31 TEST RESULTS Remark: We measured Radiated Emission at 802.11b/802.11g/802.11n HT20/802.11n HT40 mode from 30 MHz to 25GHz in DC 7.4V and the worst case was recorded. For 30MHz-1GHz Horizontal Vertical

Report No.: GTS20190801006-1-5 Page 14 of 31 For 1GHz to 25GHz 802.11b Mode (above 1GHz) Frequency(MHz): 2412 Polarity: HORIZONTAL Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 1 4824.00 49.95 PK 74 24.05 1 96 47.85 31.6 7 (dB) 36.5 2.10 1 4824.00 40.94 AV 54 13.06 1 96 38.84 31.6 7 36.5 2.10 (dB)e- amplifi Frequency(MHz): 2437 Polarity: HORIZONTAL er Emission Antenna Table Raw Pre- Correction Antenna Cable Factor Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 1 4874.00 50.35 PK 74 23.65 1 174 48.23 31.02 7.6 (dB) 36.5 2.12 1 4874.00 41.20 AV 54 12.80 1 174 39.08 31.02 7.6 36.5 2.12 (dB)e- amplifi Frequency(MHz): 2462 Polarity: HORIZONTAL er Emission Antenna Table Raw Pre- Correction Antenna Cable Factor Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 1 4924.00 51.91 PK 74 22.09 1 94 48.71 (dB) 31.58 7.82 36.2 3.20 1 4924.00 42.16 AV 54 11.84 1 94 38.96 31.58 7.82 36.2 3.20 (dB)e- 802.11g Mode (above 1GHz) amplifi er Frequency(MHz): 2412 Polarity: HORIZONTAL Factor Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) er (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) (dB/m) 1 4824.00 50.22 PK 74 23.78 1 97 48.12 31.6 7 (dB) 36.5 2.1 1 4824.00 40.70 AV 54 13.30 1 97 38.60 31.6 7 36.5 2.1 (dB)e- amplifi er Frequency(MHz): 2437 Polarity: HORIZONTAL Factor Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) er (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) (dB/m) 1 4874.00 50.76 PK 74 23.24 1 114 48.64 31.02 7.6 (dB) 36.5 2.12 1 4874.00 41.61 AV 54 12.39 1 114 39.49 31.02 7.6 36.5 2.12 (dB)e- amplifi er Frequency(MHz): 2462 Polarity: HORIZONTAL Factor Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 1 4924.00 51.30 PK 74 22.70 1 107 48.10 (dB) 31.58 7.82 36.2 3.2 1 4924.00 42.59 AV 54 11.41 1 107 39.39 31.58 7.82 36.2 3.2 (dB)e- amplifi er Factor

Report No.: GTS20190801006-1-5 Page 15 of 31 802.11n HT20 Mode (above 1GHz) Frequency(MHz): 2412 Polarity: HORIZONTAL Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) er (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) (dB/m) 1 4824.00 50.03 PK 74 23.97 1 184 47.93 31.6 7 (dB) 36.5 2.1 1 4824.00 41.10 AV 54 12.90 1 184 39.00 31.6 7 36.5 2.1 (dB)e- amplifi Frequency(MHz): 2437 Polarity: HORIZONTAL er Emission Antenna Table Raw Antenna Pre- Correction Cable Factor Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 1 4874.00 49.47 PK 74 24.53 1 140 47.35 31.02 7.6 (dB) 36.5 2.12 1 4874.00 41.62 AV 54 12.38 1 140 39.50 31.02 7.6 36.5 2.12 (dB)e- amplifi Frequency(MHz): 2462 Polarity: HORIZONTAL er Emission Antenna Table Raw Antenna Pre- Correction Cable Factor Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 1 4924.00 51.56 PK 74 22.44 1 138 48.36 31.58 (dB) 7.82 36.2 3.2 1 4924.00 41.37 AV 54 12.63 1 138 38.17 31.58 7.82 36.2 3.2 (dB)e- 802.11n HT40 Mode (above 1GHz) amplifi er Frequency(MHz): 2422 Polarity: HORIZONTAL Factor Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) er (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) (dB/m) 1 4844.00 50.14 PK 74 23.86 1 122 48.04 31.62 (dB) 7.02 36.5 2.14 1 4844.00 41.77 AV 54 12.23 1 122 39.67 31.62 7.02 36.5 2.14 (dB)e- amplifi er Frequency(MHz): 2437 Polarity: HORIZONTAL Factor Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 1 4874.00 50.36 PK 74 23.64 1 166 48.24 31.02 (dB) 7.60 36.5 2.12 1 4874.00 41.24 AV 54 12.76 1 166 39.12 31.02 7.60 36.5 2.12 (dB)e- amplifi er Frequency(MHz): 2452 Polarity: HORIZONTAL Factor Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin No. Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 1 4904.00 50.81 PK 74 23.19 1 92 47.61 31.55 (dB) 7.80 36.2 3.15 1 4904.00 42.41 AV 54 11.59 1 92 39.21 31.55 7.80 36.2 3.15 (dB)e- amplifi er REMARKS: Factor 1. Emission level (dBuV/m) =Raw Value (dBuV)+Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m)+Cable Factor (dB)-Pre-amplifier Factor 3. Margin value = Limit value- Emission level. 4. -- Mean the PK detector measured value is below average limit. 5. The other emission levels were very low against the limit.

Report No.: GTS20190801006-1-5 Page 16 of 31 4.2. Maximum Peak Output Power TEST CONFIGURATION Power Sensor EUT TEST PROCEDURE According to KDB558074 D01 DTS Measurement Guidance Section 9.1 Maximum peak conducted output power,9.1.2. and Average conducted output power, 9.2.3.1. The maximum peak conducted output power may be measured using a broadband peak RF power meter. The power meter shall have a video bandwidth that is greater than or equal to the DTS bandwidth and shall utilize a fast-responding diode detector. The maximum Average conducted output power may be measured using a wideband RF power meter with a thermocouple derector or equivalent. The power meter shall have a video bandwidth that is greater than or equal to the DTS bandwidth and shall utilize a fast-responding diode detector. LIMIT The Maximum Peak Output Power Measurement is 30dBm. TEST RESULTS Output power Output power Type Channel PK (dBm) Limit (dBm) Result AV (dBm) 01 11.34 8.33 802.11b 06 11.56 8.06 30.00 Pass 11 12.13 8.43 01 12.83 8.25 802.11g 06 12.91 8.44 30.00 Pass 11 12.95 8.68 01 12.17 8.16 802.11n(HT20) 06 12.39 8.21 30.00 Pass 11 12.65 8.59 03 12.68 8.19 802.11n(HT40) 06 12.73 8.27 30.00 Pass 09 12.86 8.42 Note: 1.The test results including the cable lose. Duty cycle used in all test items: 100%

Report No.: GTS20190801006-1-5 Page 17 of 31 802.11b 802.11g 802.11n20

Report No.: GTS20190801006-1-5 Page 18 of 31 802.11n40

Report No.: GTS20190801006-1-5 Page 19 of 31 4.3. Power Spectral Density TEST CONFIGURATION SPECTRUM EUT ANALYZER TEST PROCEDURE According to KDB 558074 D01 Method PKPSD (peak PSD) This procedure shall be used if maximum peak conducted output power was used to demonstrate compliance, and is optional if the maximum conducted (average) output power was used to demonstrate compliance. 1. Set analyzer center frequency to DTS channel center frequency. 2. Set the span to 1.5 times the DTS bandwidth. 3. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. 4. Set the VBW ≥ 3 RBW. 5. Detector = peak. 6. Sweep time = auto couple. 7. Trace mode = max hold. 8. Allow trace to fully stabilize. 9. Use the peak marker function to determine the maximum amplitude level within the RBW. 10. If measured value exceeds limit, reduce RBW (no less than 3 kHz) and repeat. LIMIT For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission. TEST RESULTS Power Spectral Density Type Channel Limit (dBm/3KHz) Result (dBm/3KHz) 01 -22.10 802.11b 06 -22.16 8.00 Pass 11 -20.69 01 -28.53 802.11g 06 -28.37 8.00 Pass 11 -27.72 01 -28.86 802.11n(HT20) 06 -28.75 8.00 Pass 11 -27.71 03 -28.43 802.11n(HT40) 06 -28.52 8.00 Pass 09 -27.90

Report No.: GTS20190801006-1-5 Page 20 of 31 802.11b 802.11g CH01 CH01 CH06 CH06 CH11 CH11

Report No.: GTS20190801006-1-5 Page 21 of 31 802.11 nHT20 802.11nHT40 CH01 CH03 CH06 CH06 CH11 CH09

Report No.: GTS20190801006-1-5 Page 22 of 31 4.4. 6dB Bandwidth TEST CONFIGURATION SPECTRUM EUT ANALYZER TEST PROCEDURE The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the fundamental frequency was measured by spectrum analyzer with RBW=100 KHz and VBW=300KHz. The 6dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 6dB. According to KDB558074 D01 for one of the following procedures may be used to determine the modulated DTS device signal bandwidth. 1. Set RBW = 100 kHz. 2. Set the video bandwidth (VBW) ≥ 3 RBW. 3. Detector = Peak. 4. Trace mode = max hold. 5. Sweep = auto couple. 6. Allow the trace to stabilize. 7. Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. LIMIT For digital modulation systems, the minimum 6 dB bandwidth shall be at least 500 kHz TEST RESULTS Type Channel 6dB Bandwidth (MHz) Limit (KHz) Result 01 8.12 802.11b 06 7.20 ≥500 Pass 11 7.64 01 16.48 802.11g 06 16.40 ≥500 Pass 11 16.40 01 17.68 802.11nHT20 06 17.64 ≥500 Pass 11 17.68 03 36.48 802.11nHT40 06 36.48 ≥500 Pass 09 36.48

Report No.: GTS20190801006-1-5 Page 23 of 31 802.11b 802.11g CH01 CH01 CH06 CH06 CH11 CH11

Report No.: GTS20190801006-1-5 Page 24 of 31 802.11n HT20 802.11n HT40 CH01 CH03 CH06 CH06 CH11 CH09

Report No.: GTS20190801006-1-5 Page 25 of 31 4.5. Band Edge Compliance of RF Emission TEST REQUIREMENT In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)). TEST PROCEDURE According to KDB 558074 D01 for Antenna-port conducted measurement. Antenna-port conducted measurements may also be used as an alternative to radiated measurements for demonstrating compliance in the restricted frequency bands. If conducted measurements are performed, then proper impedance matching must be ensured and an additional radiated test for cabinet/case spurious emissions is required. 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Remove the antenna from the EUT and then connect to a low loss RF cable from the antenna port to a EMI test receiver, then turn on the EUT and make it operate in transmitting mode. Then set it to Low Channel and High Channel within its operating range, and make sure the instrument is operated in its linear range. 3. Set both RBW and VBW of spectrum analyzer to 100 kHz with a convenient frequency span including 100kHz bandwidth from band edge, for Radiated emissions restricted band RBW=1MHz, VBW=3MHz for peak detector and RBW=1MHz, VBW=10Hz for average detector. 4. Measure the highest amplitude appearing on spectral display and set it as a reference level. Plot the graph with marking the highest point and edge frequency. 5. Repeat above procedures until all measured frequencies were complete. 6. Measure the conducted output power (in dBm) using the detector specified by the appropriate regulatory agency (see 12.2.2, 12.2.3, and 12.2.4 for guidance regarding measurement procedures for determining quasi-peak, peak, and average conducted output power, respectively). 7. Add the maximum transmit antenna gain (in dBi) to the measured output power level to determine the EIRP level (see 12.2.5 for guidance on determining the applicable antenna gain) 8. Add the appropriate maximum ground reflection factor to the EIRP level (6 dB for frequencies ≤ 30 MHz, 4.7 dB for frequencies between 30 MHz and 1000 MHz, inclusive and 0 dB for frequencies > 1000 MHz). 9. For devices with multiple antenna-ports, measure the power of each individual chain and sum the EIRP of all chains in linear terms (e.g., Watts, mW). 10. Convert the resultant EIRP level to an equivalent electric field strength using the following relationship: E = EIRP – 20log D + 104.8 where: E = electric field strength in dBμV/m, EIRP = equivalent isotropic radiated power in dBm D = specified measurement distance in meters. 11. Since the out-of-band characteristics of the EUT transmit antenna will often be unknown, the use of a conservative antenna gain value is necessary. Thus, when determining the EIRP based on the measured conducted power, the upper bound on antenna gain for a device with a single RF output shall be selected as the maximum in-band gain of the antenna across all operating bands, or 2 dBi, whichever is greater. However, for devices that operate in multiple frequency bands while using the same transmit antenna, the highest gain of the antenna within the operating band nearest in frequency to the restricted band emission being measured may be used in lieu of the overall highest gain when the emission is at a frequency that is within 20 percent of the nearest band edge frequency, but in no case shall a value less than 2 dBi be used. 12. Compare the resultant electric field strength level to the applicable regulatory limit. 13. Perform radiated spurious emission test dures until all measured frequencies were complete. LIMIT Below -20dB of the highest emission level in operating band. Radiated emissions which fall in the restricted bands, as defined in § 15.205(a), must also comply with the radiated emission limits specified in § 15.209(a).

Report No.: GTS20190801006-1-5 Page 26 of 31 TEST RESULTS 4.6.1 For Radiated Bandedge Measurement 802.11b Frequency(MHz): 2412 Polarity: HORIZONTAL Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2390.00 48.95 PK 74 25.05 1 102 54.26 27.49 (dB) 3.32 36.12 -5.31 2390.00 38.28 AV 54 15.72 1 102 43.59 27.49 3.32 36.12 -5.31 (dB)e- Frequency(MHz): 2412 Polarity: VERTICAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2390.00 48.93 PK 74 25.07 1 204 54.24 27.49 (dB) 3.32 36.12 -5.31 2390.00 38.10 AV 54 15.90 1 204 43.41 27.49 3.32 36.12 -5.31 (dB)e- Frequency(MHz): 2462 Polarity: HORIZONTAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) er (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) (dB/m) 2483.50 48.30 PK 74 24.67 1 120 54.02 27.45 (dB) 3.38 36.55 -5.72 2483.50 38.12 AV 54 12.37 1 120 43.84 27.45 3.38 36.55 -5.72 (dB)e- Frequency(MHz): 2462 Polarity: VERTICAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2483.50 48.65 PK 74 24.67 1 232 54.37 27.45 (dB) 3.38 36.55 -5.72 2483.50 38.44 AV 54 12.37 1 232 44.16 27.45 3.38 36.55 -5.72 (dB)e- amplifi 802.11g er Factor Frequency(MHz): 2412 Polarity: HORIZONTAL Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2390.00 47.97 PK 74 26.03 1 195 53.28 27.49 (dB) 3.32 36.12 -5.31 2390.00 38.37 AV 54 15.63 1 195 43.68 27.49 3.32 36.12 -5.31 (dB)e- Frequency(MHz): 2412 Polarity: VERTICAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2390.00 47.83 PK 74 26.17 1 195 53.14 27.49 (dB) 3.32 36.12 -5.31 2390.00 38.80 AV 54 15.20 1 195 44.11 27.49 3.32 36.12 -5.31 (dB)e- Frequency(MHz): 2462 Polarity: HORIZONTAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) er (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) (dB/m) 2483.50 49.18 PK 74 24.67 1 109 54.90 27.45 (dB) 3.38 36.55 -5.72 2483.50 38.08 AV 54 12.37 1 109 43.80 27.45 3.38 36.55 -5.72 (dB)e- Frequency(MHz): 2462 Polarity: VERTICAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2483.50 48.60 PK 74 24.67 1 131 54.32 27.45 (dB) 3.38 36.55 -5.72 2483.50 38.81 AV 54 12.37 1 131 44.53 27.45 3.38 36.55 -5.72 (dB)e- amplifi er Factor

Report No.: GTS20190801006-1-5 Page 27 of 31 802.11n HT20 Frequency(MHz): 2412 Polarity: HORIZONTAL Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) er (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) (dB/m) 2390.00 49.37 PK 74 24.63 1 117 54.68 27.49 (dB) 3.32 36.12 -5.31 2390.00 39.32 AV 54 14.68 1 117 44.63 27.49 3.32 36.12 -5.31 (dB)e- Frequency(MHz): 2412 Polarity: VERTICAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2390.00 48.43 PK 74 25.57 1 333 53.74 27.49 (dB) 3.32 36.12 -5.31 2390.00 38.39 AV 54 15.61 1 333 43.70 27.49 3.32 36.12 -5.31 (dB)e- Frequency(MHz): 2462 Polarity: HORIZONTAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2483.50 48.66 PK 74 24.67 1 106 54.38 27.45 (dB) 3.38 36.55 -5.72 2483.50 38.54 AV 54 12.37 1 106 44.26 27.45 3.38 36.55 -5.72 (dB)e- Frequency(MHz): 2462 Polarity: VERTICAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) er (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) (dB/m) 2483.50 48.19 PK 74 24.67 1 231 53.91 27.45 (dB) 3.38 36.55 -5.72 2483.50 38.42 AV 54 12.37 1 231 44.14 27.45 3.38 36.55 -5.72 (dB)e- amplifi er 802.11n HT40 Factor Frequency(MHz): 2422 Polarity: HORIZONTAL Emission Antenna Table Raw Antenna Cable Pre- Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2390.00 48.72 PK 74 25.28 1 113 54.03 27.49 (dB) 3.32 36.12 -5.31 2390.00 39.38 AV 54 14.62 1 113 44.69 27.49 3.32 36.12 -5.31 (dB)e- Frequency(MHz): 2422 Polarity: VERTICAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2390.00 49.04 PK 74 24.96 1 347 54.35 27.49 (dB) 3.32 36.12 -5.31 2390.00 38.83 AV 54 15.17 1 347 44.14 27.49 3.32 36.12 -5.31 (dB)e- Frequency(MHz): 2452 Polarity: HORIZONTAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) er (dB/m) 2483.50 47.82 PK 74 24.67 1 104 53.54 27.45 (dB) 3.38 36.55 -5.72 2483.50 37.80 AV 54 12.37 1 104 43.52 27.45 3.38 36.55 -5.72 (dB)e- Frequency(MHz): 2452 Polarity: VERTICAL amplifi Emission Antenna Table Raw Antenna Cable Pre- er Correction Frequency Limit Margin Level Height Angle Value Factor Factor amplifi Factor Factor (MHz) (dBuV/m) (dB) er (dBuV/m) (m) (Degree) (dBuV) (dB/m) (dB) (dB/m) 2483.50 47.76 PK 74 24.67 1 118 53.48 27.45 (dB) 3.38 36.55 -5.72 2483.50 38.08 AV 54 12.37 1 118 43.80 27.45 3.38 36.55 -5.72 (dB)e- amplifi er Factor

Report No.: GTS20190801006-1-5 Page 28 of 31 4.6.2 For Conducted Bandedge Measurement 802.11b 2412 MHz 2462 MHz 802.11g 2412 MHz 2462 MHz

Report No.: GTS20190801006-1-5 Page 29 of 31 802.11n HT20 2412 MHz 2462 MHz 802.11n HT40 2422 MHz 2452 MHz

Report No.: GTS20190801006-1-5 Page 30 of 31 4.6. Antenna Requirement Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. And according to FCC 47 CFR Section 15.247 (c), if transmitting antennas of directional gain greater than 6dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6dBi. Antenna Information The antenna is External antenna, through the buckle stretched out, The directional gains of antenna used for transmitting is 1.00dBi. ANT

Report No.: GTS20190801006-1-5 Page 31 of 31 5. TEST SETUP PHOTOS OF THE EUT Please refer to separated files for Test Setup Photos of the EUT. 6. EXTERNAL AND INTERNAL PHOTOS OF THE EUT 6.1. External photos of the EUT Please refer to separated files for External Photos of the EUT. 6.2. Internal photos of the EUT Please refer to separated files for Internal Photos of the EUT. .......................End of Report........................


Document Created: 2019-09-26 22:40:21
Document Modified: 2019-09-26 22:40:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC