User Manual

FCC ID: 2ASEF-PMA10

Users Manual

Download: PDF
FCCID_4163695

User_Manual 1. Product name Abbreviation : PMA Full name : Princeton MicArray 2. Product model PMALO 3. Accessory check PMAdevice (1) Power Adapter ( 1 ) 4. Product feature introduction The product isone type of AI device can be used in meeting room. The main application scenariosas below :during a meeting , the product capture voice fromparticipantsvia the mic array —, andrecord video via the fisheye lens at the same time. Device will transmit audio / video streaming to the cloud end and then process the data , it will do auditory localization and face recognition to identify the speakers in the meeting , and then Convert speech into text , output the meeting minutes finally. 5. Appearance illustrate Fisheye Lens Reset Key USB Secure Lock Slot Ethernet Port Wire Clip Power LED DC Power Jack Key

6. Hardware specification Hardware Specification Category Item Description Remark Appearance Dimension Cone，Height300mm,bottom165mm，top32mm Black AP Ambarella，S5L66， 4*A53@1GHz Sensor Sony，IMX226 Platform Wifi module AP6356 OS Linux Lens Fisheye lens Single fisheye lens，190° wide-angle Display Rope Light LED indicate for work /mute/standby，etc Key*4 volume adjustment、mute、voicecontrol Key/Port Reset key at the bottom of the device Ethernet port Ethernet RJ45 Gigabit Lan USB USB2.0 Audio Speaker 1*10W MIC 6+1*MEMS MIC Power supply Battery No battery Power 12V，2A，America standard power adapter Wirelessconnection WiFi 802.11b/g/n/ac ，2.4GHz/5GHz

7. Warning This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Anychanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2ASEF-PMA10


Document Created: 2019-01-31 19:06:50
Document Modified: 2019-01-31 19:06:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC