User Manual

FCC ID: 2ASE2GS600L02

Users Manual

Download: PDF
FCCID_4168849

Bluetooth 4.0 OBDII Description: Works on all 1996 to 2010 cars and light trucks sold in the United States, some 1994 and 1995 models are also ok. Software included in CD for Smartphone(Android, Symbian), PC(Windows XP, Windows 7 and Windows 8). OBD-II Software for OBDIIBluetooth is a free program that allows you to use your PC and a hardware interface to get the information from your car's computer. The program is very user-friendly, and easy to learn. It is also very easy to install: simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides. Multi-Protocol Support: 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud)

7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) The program lets you perform the following operations: 1. Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). 2. Clear trouble codes and turn off the MIL ("Check Engine" light) 3. Display current sensor data, including: 4. Engine RPM 5. Calculated Load Value 6. Coolant Temperature 7.Fuel System Status 8.Vehicle Speed 9.Short Term Fuel Trim 10.Long Term Fuel Trim 11.Intake Manifold Pressure 12.Timing Advance 13. Intake Air Temperature 14. Air Flow Rate 15. Absolute Throttle Position 16. Oxygen sensor voltages/associated short term fuel trims

17. Fuel System status 18. Fuel Pressure AND Many others... Compatible software: Window version: ScanMaster-ELM, ScanTool.net, PCMSCAN; Android version: Torque, inCarDoc, DashCommand, Auto Doctor, OBD Fusion, EOBD; IOS version: inCarDoc, Auto Doctor, OBD Fusion, Car Scanner, DashCommand; Symbian version: OBDScope. Support System: Windows XP, Windows 7/8, Android, iOS, Symbian.

FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.


Document Created: 2018-12-14 14:13:18
Document Modified: 2018-12-14 14:13:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC