RF Exposure Report

FCC ID: 2ASDV-CN2

RF Exposure Info

Download: PDF
FCCID_4224039

Maximum Permissible Exposure Statement For the Hiber Inc. LPGAN Modem Model CN2 March 7, 2019 Prepared for: Hiber, Inc. 8400 Baltimore Ave., Suite 320, College Park, MD 20704 Prepared By: Reviewed By: H.B. Compliance Solutions 5005 S. Ash Avenue, Suite # A-10 Tempe, Arizona 85282 Hoosamuddin Bandukwala Cert # ATL-0062-E Certificates and reports shall not be reproduced except in full, without the written permission of H.B Compliance Solutions, LLC.

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S = PG/4πR² Where, S = power density (mW/cm2) P = output power at the antenna terminal (mW) G = gain of transmit antenna (numeric) R = distance from transmitting antenna (cm) Maximum peak output power at antenna input terminal = 31.12 (dBm) * Maximum peak output power at antenna input terminal = 1294.1 (mW) Antenna gain (typical) = 0 (dBi) Maximum antenna gain = 1.0 (numeric) Prediction distance = 30 (cm) Prediction frequency = 399.9 (MHz) MPE limit for uncontrolled exposure at prediction frequency = 0.267 (mW/cm^2) Power density at prediction frequency = 0.11442 (mW/cm^2) *Includes 1dB of manufacturer output power tolerance. To solve for the minimum mounting distance required; R = √ (PG/4πS) R = √ (346 x 1.4 / 4π x 0.11442) = 30 cm (Based on continuous transmission) END OF TEST REPORT HBCS MPE Report # EMC_18048 Page 2 of 2


Document Created: 2019-03-07 13:12:54
Document Modified: 2019-03-07 13:12:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC