RF exposure letter

FCC ID: 2ASBG-YH8230L

RF Exposure Info

Download: PDF
FCCID_4309616

                 FCC ID : 2ASBG-YH8230L

  1. RF EXPOSURE

  1.1.The Requirement
            System operating under the provisions of this section shall be operated in a manner
            that ensures that the public is not exposed to radio frequency energy levels in excess
            of the Commission’s guidelines. See Section 15.247(b)(4) and Section 1.1307(b)(1)


  1.2.Limit For Maximum Permissible Exposure (MPE)

       Limits for General Population/ Uncontrolled Exposure
                                                            Power Density     Averaging Time
   Frequency         Electric Field     Magnetic Field
                                                                (S)                2        2
     Range           Strength (E)        Strength (H)                            E ,H           or S
                                                                         2
     (MHz)              (V/m)               (A/m)            ( mW/cm )
                                                                                   (minutes)
    0.3-1.34              614                1.63               (100)*               30
     1.34-30             824/f              2.19/f             (180/f)*                30
     30-300               27.5               0.073                0.2                  30
    300-1500                                                    f/1500                 30
  1500-100,000                                                    1.0                  30

F = frequency in MHz,     * Plane-wave equivalent power density


  1.3.MPE Calculation Method
         Predication of MPE limit at a given distance
         Equation from page 18 of OET Bulletin 65, Edition 97-01
         S=PG/4πR²

         Where: S=power density
                 P=power input to antenna
                G=power gain of the antenna in the direction of interest relative to an isotropic
                radiator
                 R=distance to the center of radiation of the antenna

         From the peak EUT RF output power, the minimum mobile separation
         distance, d=0.2m, as well as the gain of the antenna is 2dBi, the RF power
         density can be obtained.


   1.4.TEST RESULTS
         Maximum measured transmitter power

         We recorded the worse case
   Test   Minimum      Output Target        Target    Antenna      Power         Power
Frequency Separation    Power    power      power      Gain       Density       Density      Test
           Distance    (dBm)     (dBm)      (mW)     (Numeric)    At 20 cm       Limit      Results
(MHz)
            (cm)                                                 (mW/cm2)      (mW/cm2)
  2480      20.00        6.03      6±1      5.012      1.585       0.0016        1.000       Pass

         Antenna Gain = 2dBi

         The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the
         uncontrolled RF Exposure.



   1.5.FCC Radiation Exposure Statement
         This equipment complies with FCC radiation exposure limits set forth for an
         uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio
         frequency exposure limits, Human proximity to the antenna shall not be less than
         20cm(8 inches) during normal operation. Proposed RF exposure safety information to
         include in User’s Manual.



Document Created: 2019-06-06 15:48:12
Document Modified: 2019-06-06 15:48:12

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC