user_manual

FCC ID: 2ASAF-PLUG

Users Manual

Download: PDF
FCCID_4151389

Test Model：Wi-Fi Plug II-14 2. Wireless Router Connection Wi-Fi PlugII 2.1 Download APP Quick Installation Guideline ① Scan the QR Code on the right side and download the APP. iOS Android 1. Installation Datalogger Model Interface Code Interface Icon Connected WLAN 2.2 Connect Wi-Fi Datalogger ① Find the corresponding Wi-Fi PlugII - 01/11（Method 1） SmartClient Disconnect WLAN interface code on the right table, Wi-Fi PlugII - 04（Method 2） ❶ Please enter user name Please choose a Wi-Fi and connect. CHOOSE A NETWORK... 2018LA ① Open the APP, tap the Wi-Fi Config button to enter this page. according to the model of the Please enter password W2015 PASSWORD datalogger. Keep password Eybond2015 12345678 ② Tap the Connect Wi-Fi Datalogger ❷ Eybond 2.4g ② Based on the corresponding icon, Wi-Fi PlugII - 02/10 Connect button on the Connected page Login W0016250020617 finish the installation according to Wi-Fi Datalogger Wifi-test (Android phone has no need of this Wi-Fi Config the interface code. Wifi111 step) . ③ Confirm the status of the LED light Register ③ Select the same number of Wi-Fi (After step2.3, when 4 LED light Wi-Fi PlugII - 07 ❸ DEMO> PlugII PN to connect. keep on, showing the normal Network Setting Network Diagnose (Initial Password: 12345678) working status). Wi-Fi PlugII - 03/05/06/08/12/13 ❹ ❶ Method 1 : Connected Network Settings ① Connect the 4PIN power cable of the Wi-Fi 2.3 Network Setting Please connect to the wireless router PlugII to the inverter. W0016250020617 Router Name: ② Fasten the Wi-Fi PlugII to the inverter with ① After the connection completes, tap the Please choose a Wi-Fi and connect. Password: the screw. Network Setting button. Confirm password: ② According to the prompts, type in the Method 2 : information to finish the network setting. Connect Wi-Fi Datalogger VRS TEN MCC RWP ① Connect the 2 PIN green interface of the ③ Reconnect the Wi-Fi or Cellular Data Wi-Fi PlugII to the RS-485 terminal of which can surf the Internet instead of the the inverter. Wi-Fi connected by step 2.2. Setting ② Connect the 5PIN power cable of the Wi-Fi Network Setting Network Diagnose PlugII to the inverter. ③ Fasten the Wi-Fi PlugII to the inverter with the screw. 3. Create Account And Plant ❷ SmartClient User Name Register ① Align the 4-hole aviation plug of the Password 3.1 Create Account Wi-Fi PlugII with the inverter and Please enter user name Confirm Password plug it in. Please enter password Keep password E-mail ① Open the APP, tap the Register button ② Tighten the nut of the Wi-Fi PlugII to PWR CCM NET SRV Phone Number Datalogger PN to enter this page. the inverter. Login Wi-Fi Config PN ② According to the prompts, type in the information to create an account. Register Demo> Register 新建电站 Create Plant 新建电站 Location of the plant Create Plants ❸ 3.2 Create Plant Please enter the location of the plant Plant Name* Please enter plant’s name Plant description ① Align the RJ-45 crystal head of the Wi-Fi ① Login the account and click Please input the description the plant PlugII with the inverter and insert it in tightly. the list button on the bottom ② Fasten the Wi-Fi PlugII to the inverter with of the home page. You don't have Plant picture a plant yet. VRS TEN MCC RWP the screw. ② Tap the “＋” button on the top- Plant picture right corner of the list page ③ According to the prompts, type Finish in the information to finish Location:Baoan,Shenzhen creating plant. OVERVIEW LIST MAP ME Confirm Cancel Note: One account can create multiple plants and one plant can add multiple dataloggers. If you only have one datalogger, you could ignore this step. ❹ 3.3 Add Multiple Dataloggers Add Datalogger Device Add Datalogger Plant Name Device 1 ① Tap the new plant you just created, Current power: 55.6kW ① Align the serial port of the Wi-Fi PlugII PN:123456789 Daily generation: 141.6kWh Current power : 125kW Daily income: ¥158.2 Total generation: 364.3kWh Daily generation : 125kWh Datalogger PN with the inverter and plug it in tightly. and enter its home page. ② Fasten the Wi-Fi PlugII to the inverter PWR CCM NET SRV ② Click the Device button on the with the screw. bottom of the home page. ③ Tap the “＋” button at the top-right corner to add the datalogger. Input the Datalogger PN ④ Scan the datalogger PN on the Wi-Fi PlugII, or input it manually. OVERVIEW LIST MAP ME Info Data Devices Alarm Map

20C


Document Created: 2019-01-18 09:27:18
Document Modified: 2019-01-18 09:27:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC