FCC Modular Approval Reques t Rev3.0

FCC ID: 2AS9401

Cover Letter(s)

Download: PDF
FCCID_4333453

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Modular Transmitter Application Company name: FCC ID: 2AS9401 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID:2AS9401 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry Yes, shield is provided as verfieid in the shielded. Physical components and tuning capacitor(s) may be submitted photo located external to the shield, but must be on the module assembly. The module must have buffered modulation/data inputs to ensure Yes that the device will comply with Part 15 requirements with any type of input signal. Yes The module must contain power supply regulation on the module. The module must contain a permanently attached antenna, or Yes contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). Yes, the module was tested in a stand-alone The module must demonstrate compliance in a stand-alone configuration please refer to test setup photo. configuration. Yes, the module has a permanently affixed The module must be labeled with its permanently affixed FCC ID label with its own FCC ID number .Please label, or use an electronic display (see KDB Publication 784748). refer to label and label location. The module must comply with all specific rules applicable to the Yes,the module comply with this transmitter, including all the conditions provided in the integration requirement .Please refer to user manual . instructions by the grantee. Yes,the module comply with this The module must comply with RF exposure requirements requirement .Please refer to MPE report. Integration Instructions for host product manufacturers FCC Modular Approval Request Rev 3.0

The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Requirements of KDB 996369 D03 User Manual Page Number Ref Sect reference 2.2 List of applicable FCC rules Page 20 2.3 Summarize the specific operational use conditions Page 20 2.4 Limited module procedures Page 20 2.5 Trace antenna designs Page 20 2.6 RF exposure considerations Page 20 2.7 Antennas Page 20 2.8 Label and compliance information Page 20 2.9 Information on test modes and additional testing Page 20 requirements 2.10 Additional testing, Part 15 Subpart B disclaimer Page 20 Name: Kenneth Wong Date: 21,June 2019 Title: VP of Design and Development Signature of applicant FCC Modular Approval Request Rev 3.0


Document Created: 2019-06-21 16:02:06
Document Modified: 2019-06-21 16:02:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC