User Manual

FCC ID: 2AS7VTWS11

Users Manual

Download: PDF
FCCID_4388204

Please do not overuse this earphone or put it under heavy pressure, Specifications: Note: The call support both side Bluetooth earphone,shut down,play and suspension can be controlled by any one of the multi-function keys connected Summary NOTE: True wireless stereo (TWS), real no wires design, individual left and right channel, HIFI sound, both the left and right earbud are Bluetooth enabled, earphone,and another headset will be synchronized control. The boot will be TWS(true wireless stereo)earphones could be used separately, or used as one pair. directly long press the multi-function button to turn on automatically back at 1 Dust-proof mesh This equipment has been tested and found to comply with the limits for a the next time. Class B digital device, pursuant to part 15 of the FCC Rules. These limits are V5.0 (both sides), ultra low consumption Bluetooth version: 2 Multi-function button designed to provide reasonable protection against harmful interference in a V5.0 Bluetooth usage: residential installation. This equipment generates uses and can radiate radio Bluetooth Mode: A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3. Bluetooth Frequency: 2.4GHZ 1. Making phone calls: 3 MIC frequency energy and, if not installed and used in accordance with the Be sure the earphone connected with your mobile phone, and then you can instructions, may cause harmful interference to radio communications. Bluetooth Range: 12 meters with no obstacles make phone calls. When making calls, both sides earphone working, and there However, there is no guarantee that interference will not occur in a particular is incoming call, it would broadcast calling numbers. You answer the call by 4 Charging port Earbud: 50mah rechargeable Li-ion battery slightly press the power button one time and refuse to answer by long press installation. If this equipment does cause harmful interference to radio or Battery capacity: Manual Charging dock:400mah (optional) the power button 2 seconds. Click the button 3 times to redial last number. 5 Charging Box Light television reception, which can be determined by turning the equipment off Single earbud mode:4-5 hours 2. Voice control and on, the user is encouraged to try to correct the interference by one or Talk/Play time: One Pair earbuds mode:3-4 hours When the earphones are in music mode, you can enter voice control by quick more of the following measures: press the power button 2 times. 6 Android Charging port Single earbud mode:100 hours Standby time: One Pair earbuds mode:60 hours Warnings: - Reorient or relocate the receiving antenna. 3. Listening to music: Be sure the earphone connected with your mobile phone, then you can listen to - Increase the separation between the equipment and receiver. 1. Please do not overuse this earphone or put it under heavy pressure, About pairing: music on your music list. Shortly press the power button to stop the music and -Connect the equipment into an outlet on a circuit different from that to replay by press again. Long press right earphone to play next song, long press left keep away from wet and heat. 1. Pairing with one earbud: Long press the Multi-Function button until the LED earphone to play previous song. which the receiver is connected. flashing in red and blue alternately, then turn on the Bluetooth on your device and select “ TWS ” on your list, (there would be reminding voice saying 2. Keep away from WIFI, router or other high frequency transmitting connected), then you could enjoy music or making phones calls. It supports 4. Power off. equipment to prevent interruption of signal receiving. -Consult the dealer or an experienced radio/TV technician for help reporting incoming calls. Long press the power button until led in red when not use, the Bluetooth Changes or modifications not expressly approved by the party responsible device enter off mode. lt would be power off automatically when the earphone 3. Please use this earphone under its working range (10meters), and the away from your Bluetooth device over 5 minutes. No need to worry power for compliance could void the user's authority to operate the equipment. 2.Pairing with both sides: effect would be better if there is no obstacle between the connected exhausted. This device complies with Part 15 of the FCC Rules. Operation is subject to A. Long press the multi-function buttons of both sides at the same time until the devices. led flashing in red and blue alternately, then double click EITHER side to enter 5. Charging: the following two conditions: pairing mode, (there would be reminding voice "ready to pair") then turn on the There is reminding sound when battery is low, and the led would flash in red at 4. Use this Bluetooth earphone to connect any device with Bluetooth (1) this device may not cause harmful interference, and Bluetooth on your device and choose “ TWS ” to connect. When the led flash the same time. When taking charge, the led would be in red, and turns in blue function (2) this device must accept any interference received, including interference slowly in blue (3-5s) , they pair successfully with voice. when fully charged. Note:the earphone would be forced to shut down when charging even if they that may cause undesired operation. are power ON before charging.


Document Created: 2019-06-28 12:06:31
Document Modified: 2019-06-28 12:06:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC