RF Exposure Info

FCC ID: 2AS69LLY00043845100

RF Exposure Info

Download: PDF
FCCID_4435805

LAB N° 1356 Report No. 28113143 001 11.9 TEST: RF Exposure Requirements PASS Parameters required prior to the Laboratory Ambient Temperature (°C) 15 to 35 °C test Relative Humidity (%) 30 to 60 % Parameters recorded during the Laboratory Ambient Temperature (°C) --- test Relative Humidity (%) --- Air pressure (hPa) 1020  Power Supply / Frequency Application Point Fully configured sample tested at +3,0V dc --- the power line frequency Equipment mode: Operation mode #1 FCC Standard 47 CFR 2.1093 Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines 47 CFR 2.1093 - Radiofrequency radiation exposure evaluation: portable devices EUT classification (fixed, mobile or Portable equipment portable devices) Limits See next table Freq. Range 2402÷2480MHz TRF FCC_15.247_000 Page 59 of 62 07/10/2016

LAB N° 1356 Report No. 28113143 001 TRF FCC_15.247_000 Page 60 of 62 07/10/2016

LAB N° 1356 Report No. 28113143 001 Operating Condition #1 Max Radiated Max Radiated Separation Exemption Limit Frequency Output Power Output Power distance (obtained by linear CH (P) (P) interpolation) (mW) (MHz) (dBm) (mW) (mm) Low 2402 -8,60 0,138 5 10,08 Middle 2440 -12,18 0,060 5 10,01 High 2480 -12,02 0,062 5 9,94 VERDICT SAR evaluation is not required because the output power value is less than exemption limit (separation distance 5mm) TRF FCC_15.247_000 Page 61 of 62 07/10/2016


Document Created: 2019-09-05 18:04:53
Document Modified: 2019-09-05 18:04:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC