12775717-E1V2 MPE report

FCC ID: 2AS57OSSIACOTATX201

RF Exposure Info

Download: PDF
FCCID_4304485

CERTIFICATION TEST REPORT Report Number. : 12775717-E1V1 Applicant : Ossia Inc. 1100 112th Ave NE, Suite 301, Bellevue, WA, 98004 U.S.A Model : Venus V2 FCC ID : 2AS57OSSIACOTATX201 EUT Description : Wireless Power Source Test Standard(s) : FCC 47 CFR PART 1 SUBPART I FCC 47 CFR PART 2 SUBPART J Date Of Issue: May 30, 2019 Prepared by: UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 NVLAP Lab code: 200065-0

REPORT NO: 12775717-E1V2 DATE: MAY 30, 2019 FCC ID: 2AS57OSSIACOTATX201 MODEL: Venus V2 Revision History Issue Rev. Date Revisions Revised By V1 5/29/2019 Initial Issue -- V2 5/30/2019 Corrected FCC ID Dave Weaver Page 2 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12775717-E1V2 DATE: MAY 30, 2019 FCC ID: 2AS57OSSIACOTATX201 MODEL: Venus V2 TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................4 2. TEST METHODOLOGY ......................................................................................................5 3. REFERENCES ....................................................................................................................5 4. FACILITIES AND ACCREDITATION ..................................................................................5 5. DESCRIPTION OF EUT ......................................................................................................5 6. MAXIMUM PERMISSIBLE RF EXPOSURE ........................................................................6 6.1. FCC RULES .................................................................................................................6 6.2. EQUATIONS.................................................................................................................7 7. RF EXPOSURE RESULTS ..................................................................................................8 Page 3 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12775717-E1V2 DATE: MAY 30, 2019 FCC ID: 2AS57OSSIACOTATX201 MODEL: Venus V2 1. ATTESTATION OF TEST RESULTS COMPANY NAME: OSSIA INC. EUT DESCRIPTION: WIRELESS POWER SOURCE MODEL NUMBER: VENUS V2 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Complies UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of the U.S. government. Approved & Released For UL Verification Services Inc. By: Dave Weaver OPERATIONS LEADER UL Verification Services Inc. Page 4 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12775717-E1V2 DATE: MAY 30, 2019 FCC ID: 2AS57OSSIACOTATX201 MODEL: Venus V2 2. TEST METHODOLOGY All calculations were made in accordance with FCC KDB 447498 D01. 3. REFERENCES The power levels used for calculations were declared by the applicant as maximums. Antenna gain data is excerpted from the applicable test report. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 and 47266 Benicia Street, and 47658 Kato Road, Fremont, California, USA. Line conducted emissions are measured only at the 47173 address. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. 5. DESCRIPTION OF EUT The EUT is a wireless power source. In addition to the wireless power source there is also an 802.15.4 radio for communication with client devices. The maximum declared output power is 0dBm. The antenna gain is 2dBi The RF exposure for the wireless power source is addressed in UL report 12775717-S2V2. Page 5 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12775717-E1V2 DATE: MAY 30, 2019 FCC ID: 2AS57OSSIACOTATX201 MODEL: Venus V2 6. MAXIMUM PERMISSIBLE RF EXPOSURE 6.1. FCC RULES §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. T ABLE 1—LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 2 3.0-30 1842/f 4.89/f *900/f 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Notes: (1) Occupational/controlled exposure limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when a person is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. (2) General population/uncontrolled exposure limits apply in situations in which the general public may be exposed, or in which persons who are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure Page 6 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12775717-E1V2 DATE: MAY 30, 2019 FCC ID: 2AS57OSSIACOTATX201 MODEL: Venus V2 6.2. EQUATIONS POWER DENSITY Power density is given by: S = EIRP / (4 * Pi * D^2) Where S = Power density in mW/cm^2 EIRP = Equivalent Isotropic Radiated Power in mW D = Separation distance in cm Power density in units of mW/cm^2 is converted to units of W/m^2 by multiplying by 10. DISTANCE Distance is given by: D = SQRT (EIRP / (4 * Pi * S)) Where D = Separation distance in cm EIRP = Equivalent Isotropic Radiated Power in mW S = Power density in mW/cm^2 SOURCE-BASED DUTY CYCLE Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be applied. Source-based time-averaged EIRP = (DC / 100) * EIRP Where DC = Duty Cycle in %, as applicable EIRP = Equivalent Isotropic Radiated Power in W Page 7 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.

REPORT NO: 12775717-E1V2 DATE: MAY 30, 2019 FCC ID: 2AS57OSSIACOTATX201 MODEL: Venus V2 7. RF EXPOSURE RESULTS In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. Single Chain and non-colocated transmitters Output Antenna IC FCC Power IC Power Separation Duty FCC Power Peak Peak EIRP Power Density Density Band Mode Distance Cycle Density Power Gain (mW) Density (mW/cm^2) (W/m^2) (cm) (%) (mW/cm^2) (dBm) (dBi) (W/m^2) Limit Limit 2.4G normal 20 0.00 2.00 100.0 1.6 0.000 0.003 0.61 2.77 . END OF REPORT Page 8 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 319-4000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc.


Document Created: 2019-06-27 23:24:19
Document Modified: 2019-06-27 23:24:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC