18_D007 RFExp

FCC ID: 2AS3V-D007-1

RF Exposure Info

Download: PDF
FCCID_4309969

MPE REPORT FCC ID: 2AS3V-D007-1 Date of issue: May 14, 2019 Report Number: MTi190506E009 Sample Description: Azuga SafetyCamTM Model(s): D007 Applicant: Azuga Inc Address: 2570 N. First Street, #200 San Jose, CA 95131 Date of Test: Apr. 23, 2019 to May 14, 2019 Shenzhen Microtest Co., Ltd. http://www.mtitest.com This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 2 of 4 - Report No.: MTi190506E009 TEST RESULT CERTIFICATION Applicant’s name: Azuga Inc Address: 2570 N. First Street, #200 San Jose, CA 95131 Manufacture's Name: SHENZHEN AONI ELECTRONIC CO., LTD Address: No.5 Bldg, Honghui Industrial park, 2nd liuxian Road, Xinan street, Baoan District, Shenzhen Product name: Azuga SafetyCamTM Trademark: AZUGA Model and/or type reference . : D007 Serial Model ...............................: N/A RF Exposure Procedures ....... : KDB 447498 D01 v06 This device described above has been tested by Shenzhen Microtest Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Jone Lee May 14, 2019 Reviewed by: Blue Zheng May 14, 2019 Approved by: Smith Chen May 14, 2019 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 3 of 4 - Report No.: MTi190506E009 RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method Friis transmission formula: Pd= (Pout*G)\ (4*pi*R2) Where Pd= Power density in mW/cm2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1415926 R= distance between observation point and center of the radiator in cm(20cm) Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 4 of 4 - Report No.: MTi190506E009 Measurement Result WIFI: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, 802.11n HT40: 2422-2452MHz, Power density limited: 1mW/ cm2 Antenna Type: Wifi Antenna: PCB Mounted Embedded Antenna; WIFI antenna gain: 2dBi R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(2/10)=1.58 Power conducted Tune-up Evaluation result Max Antenna density power power at 20cm Channel Limits Freq. modulation tune-up power Gain (MHz) Power (dBm) (dBm) (dBm) (mW) Numeric density(mW/cm2 ) (mW/cm2) Ant A Ant A Ant A Ant A Ant A Ant A 2412 11.4 12±1 13 19.952623 1.58 0.00627 1 2437 802.11b 12.29 12±1 13 19.952623 1.58 0.00627 1 2462 12.05 12±1 13 19.952623 1.58 0.00627 1 2412 7.79 8±1 9 7.9432823 1.58 0.00250 1 2437 802.11g 9.63 8±1 9 7.9432823 1.58 0.00250 1 2462 9.46 8±1 9 7.9432823 1.58 0.00250 1 2412 6.58 7±1 8 6.3095734 1.58 0.00198 1 802.11n 2437 7.46 7±1 8 6.3095734 1.58 0.00198 1 H20 2462 7.89 7±1 8 6.3095734 1.58 0.00198 1 2422 5.38 6±1 7 5.0118723 1.58 0.00158 1 802.11n 2437 5.38 6±1 7 5.0118723 1.58 0.00158 1 H40 2452 5.60 6±1 7 5.0118723 1.58 0.00158 1 Conclusion: For the max result: 0.00627≤ 1.0 for 1g SAR, No SAR is required. ----END OF REPORT---- Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


Document Created: 2019-05-29 14:12:15
Document Modified: 2019-05-29 14:12:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC