user manual


Users Manual

Download: PDF


Connect the USB charging cable to the Micro USB port in the bottom of the left
earcup and the USB end to a Device capable of USB charging. The light above the
socket will glow RED while charging and go out when fully charged.

Power On and Off Headset:
To Power On, press and hold the multifunction key I about three seconds. You will

see the blue indicator light flashes and will connect to the last paired device. If you
have never paired the headset then you will need to pair it to a device. To Power
Off, press and hold the multifunction key I about five seconds. You will see the

indicator lights stop flashing.

1.   Ensure that your music player or phone is switched on and you have enabled
     the Bluetooth® function.
2.   Power on the headset by pressing the multifunction key I for about five

     seconds. The Red and Blue indicator lights will flash and the headset is ready
     to pair to your device.
3.   Go to your Bluetooth® feature on your music player or phone, and set it to
     search for Bluetooth® devices.
4.   Select “KZ----” from the list of found devices on your music player or phone.
5.   If necessary, enter the passcode 0000 to pair and connect the headset to your



Function Keys:

                                                         I   NC

6. Active Noise Cancellation, press “NC”

1. Press and Hold “    “ to play previos track
2. Press and Hold “    “ to play next track
3. Press once    to pause and press again      to play


Krankz™ makes it easy so you can make and recieve calls hands-free with your
compatible mobile phone while listening to your favorite music.

1.    Battery: 3.7 Vdc Lithium-Ion Polymer Battery
2.    Talk & Play time: About 35 Hours, not using ANC function
3.    Standby Time: 30 Days
4.    Charging Time: 4 Hours
5.    Driver diameter: 50mm
6.    Driver impedance: 32ohms
7.    Frequency Response: 5-30kHz
8.    Bluetooth®
9.    Range: 10meters (33ft)

1.    Maxx Headphones                   1 Ea.
2.    EVA Case                          1 Ea.
3.    USB Charging Cable                1 Ea.
4.    Audio Connecting Cable            1 Ea.
5.    User Manual                       1 Ea.



NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

Document Created: 2019-04-24 15:03:58
Document Modified: 2019-04-24 15:03:58

© 2019
This site is not affiliated with or endorsed by the FCC