RF Exposure report

FCC ID: 2ARYH-SAYA-SA0100

RF Exposure Info

Download: PDF
FCCID_4321448

RF EXPOSURE EVALUATION

According to FCC 1.1310: The criteria listed in the following table shall be used
to evaluate the environment impact of human exposure to radio frequency(RF)
Radiation as specified in §1.1307(b)

FCC ID: 2ARYH -SAYA-SA0100

EUT Specification
EUT                       BLUEBOX UHF 1CH Mid Range Controller
Frequency            band    WLAN: 2.412GHz ~ 2.462GHz
(Operating)                  WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz
                             WLAN: 5.745GHz ~ 5825GHz
                             Others 910-920MHz
Device category             Portable (<20cm separation)
                            Mobile (>20cm separation)
                            Others ___
Exposure classification     Occupational/Controlled exposure (S = 5mW/cm2)
                                  General     Population/Uncontrolled   exposure
                          (S=1mW/cm2)
Antenna diversity           Single antenna
                            Multiple antennas
                            Tx diversity
                            Rx diversity
                            Tx/Rx diversity
Max. output power         13.670dBm (0.0233W)
Antenna gain (Max)        1.5 dBi
Evaluation applied          MPE Evaluation
                            SAR Evaluation

Limits for Maximum Permissible Exposure(MPE)

  Frequency     Electric Field   Magnetic Field        Power           Average
 Range(MHz)     Strength(V/m)    Strength(A/m)    Density(mW/cm2)       Time
              (A) Limits for Occupational/Control Exposures
  300-1500           --              --            F/300                  6
1500-100000          --              --               5                   6
         (B) Limits for General Population/Uncontrol Exposures
  300-1500           --              --            F/1500                  6
1500-100000          --              --               1                   30


   Friis transmission formula: Pd=(Pout*G)\(4*pi*R2)

 Where
 Pd= Power density in mW/cm2
 Pout=output power to antenna in Mw
 G= gain of antenna in linear scale
 Pi=3.1416
 R= distance between observation point and center of the radiator in cm
 Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna
 and total power input to the antenna, through the calculation, we will know the
 distance where the MPE limit is reached.


 Measurement Result

                                                              Power         Power
 Channel    Measured      Tune up     Max. Tune   Antenna
                                                             density at    density
Frequency    Power       tolerance    up Power     Gain
                                                               20cm         Limits
  (MHz)      (dBm)         (dBm)       (dBm)       (dBi)
                                                            (mW/ cm2 )    (mW/cm2 )
  910        13.256      13.256±1       14.26       1.5       0.0075       0.6067
  915        13.297      13.297±1       14.30       1.5       0.0076       0.6100
  920        13.670      13.670±1       14.67       1.5       0.0082       0.6133



Document Created: 2019-06-14 16:17:26
Document Modified: 2019-06-14 16:17:26

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC