RF Exposure report

FCC ID: 2ARTOPPMN3U

RF Exposure Info

Download: PDF
FCCID_4165647

Delta Electronics, Inc. TEST REPORT REPORT NUMBER 190100336TWN-001 ISSUE DATE Jan. 31, 2019 PAGES 18 DOCUMENT CONTROL NUMBER © 2019 INTERTEK

Intertek Report No.: 190100336TWN-001 Test Report Page: 1 of 11 Maximum Permissible Exposure (MPE) Evaluation Report Applicant: Delta Electronics, Inc. No.39, Sec. 2, Huandong Rd., Shanhua Dist., Tainan City 741, Taiwan Product: SUB 1G module Model No.: PPM N3U SB1-C Brand Name: Delta FCC ID: 2ARTOPPMN3U Test Method/ Standard: FCC 1.1310 Test By: Intertek Testing Services Taiwan Ltd., Hsinchu Laboratory No. 11, Lane 275, Ko-Nan 1 Street, Chia-Tung Li, Shiang-Shan District, Hsinchu City, Taiwan 0597 Prepared and Checked by: Approved by: Durant Wei Rico Deng Engineer Supervisor This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.

Intertek Report No.: 190100336TWN-001 Page: 2 of 11 TEST REPORT Revision History Report No. Issue Date Revision Summary 190100336TWN-001 Jan. 31, 2019 Original report

Intertek Report No.: 190100336TWN-001 TEST REPORT Page: 3 of 11 Table of Contents Summary of Tests ....................................................................................................................... 4 1. General Information ............................................................................................................... 5 1.1 Identification of the EUT .................................................................................................. 5 1.2 Antenna description ......................................................................................................... 5 1.3 Peripherals equipment ..................................................................................................... 5 2. Test specifications................................................................................................................... 6 2.1 Introduction ...................................................................................................................... 6 2.2 RF Exposure Limit ............................................................................................................. 7 2.3 RF Exposure calculations .................................................................................................. 9 2.4 Operation mode ............................................................................................................... 9 2.5 Test equipment ............................................................................................................... 10 2.6 Test Set-up ...................................................................................................................... 10 3. Test results ............................................................................................................................ 11

Intertek Report No.: 190100336TWN-001 TEST REPORT Page: 4 of 11 Summary of Tests MPE Evaluation meet FCC OET No. 65: 1997, IEEE C95.1-2005 Test Reference Results MPE Evaluation FCC Guidelines for Human Exposure IEEE C95.1 Complies

Intertek Report No.: 190100336TWN-001 TEST REPORT Page: 5 of 11 1. General Information 1.1 Identification of the EUT Product: SUB 1G module Model No.: PPM N3U SB1-C Operating Frequency: 902.7 MHz~ 927.3 MHz Channel Number: 3 channels Access scheme: DTS Rated Power: DC 12V from Power supply Power Cord: N/A Sample receiving date: Sep. 13, 2018 Sample condition: Workable Test Date(s): Jan. 31, 2019 1.2 Antenna description Antenna 1 Antenna Gain : 2.0 dBi Antenna Type : Dipole Antenna Connector Type : I-pex Antenna 2 Antenna Gain : 1.5 dBi Antenna Type : Dipole Antenna Connector Type : I-pex 1.3 Peripherals equipment No. Model no. Data Cable Power supply TP-1603C N/A

Intertek Report No.: 190100336TWN-001 TEST REPORT Page: 6 of 11 2. Test specifications 2.1 Introduction The EUT operates in the 902 MHz, 915 MHz, 928 MHz. Due to the EUT (include antenna) at its normal operation distance is at least 20 cm from the human body, the EUT was defined as a Mobile Device. The reason to do the MPE Evaluation is to avoid the RF hazard to human body. The maximum output power and gain of the antenna were used to calculate the limited Power density (S) at 20 cm distance away from the product. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 and Safety Code 6 are followed. According to 1.1307 (b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline.

Intertek Report No.: 190100336TWN-001 TEST REPORT Page: 7 of 11 2.2 RF Exposure Limit According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b) and KDB 447498 D01 General RF Exposure Guidance v06.

ntertek Total Quality. Assured. SAR Test Exclusion Thresholds for 100 MHz — 6 GHz and > 50 mm Approximate SAR test exclusion power thresholds at selected frequencies and test separation distances are illustrated in the following table. MHz 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 mm 100 150 300 450 835 900 1500 122 222 322 422 522 622 722 822 922 1022 1122 1222 1322 1422 1522 mW 1900 109 209 309 409 509 609 709 809 909 1009 1109 1209 1309 1409 1509 2450 96 196 296 396 496 596 696 796 896 996 1096 1196 1296 1396 1496 3600 79 179 279 379 479 579 679 779 879 979 1079 1179 1279 1379 1479 5200 66 166 266 366 466 566 666 766 866 966 1066 1166 1266 1366 1466 5400 65 165 265 365 465 565 665 765 865 965 1065 1165 1265 1365 1465 5800 62 162 262 362 462 562 662 762 862 962 1062 1162 1262 1362 1462 SAR Test Exclusion Thresholds for < 100 MHz and < 200 mm Approximate SAR test exclusion power thresholds at selected frequencies and test separation distances are illustrated in the following table. MHz <50 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 mm 100 237 474 481 487 494 501 507 514 521 527 534 541 547 554 561 567 50 308 617 625 634 643 651 660 669 677 686 695 703 712 721 729 738 10 474 948 961 975 988 1001 1015 1028 lo41 10sS 1068 1081 1095 1108 1121 1135 1 711 1422 1442 1462 1482 1502 1522 1542 1562 1582 1602 1622 1642 1662 1682 1702 mW 0.1 948 1896 1923 1949 1976 2003 2029 2056 2083 2109 2136 2163 2189 2216 2243 2269 0.05 1019 2039 2067 2096 2125 2153 2182 2211 2239 2268 2297 2325 2354 2383 2411 2440 0.01 1185 2370 2403 2437 2470 2503 2537 2570 2603 2637 2670 2703 2737 2770 2803 2837

Intertek Report No.: 190100336TWN-001 TEST REPORT Page: 9 of 11 2.3 RF Exposure calculations From §FCC 1.1310 table 1, the maximum permissible RF exposure for an uncontrolled environment is 1 mW/(cm2) (or 10 W/m2)* Power density (S) is calculated by the following formula: S = (P * G)/4R2 where, S = Power density (mW/cm2) P = Output power to antenna (mW) R = Distance between radiating structure and observation point (cm) G = Gain of antenna in numeric  = 3.1416 Example: Assume a mobile device operates at 2412MHz and its maximum output power is 50mW, and the maximum gain of antenna is 1 (numeric) /0dBi. then the power density (S) = (50 * 1)/4**202 = 0.00995 (mW/cm2) (or = 0.0995 W/m2) 2.4 Operation mode The signal is maximized through rotation and placement in the three orthogonal axes. X axis Y axis Z axis After verifying three axes, we found the maximum electromagnetic field was occurred at X axis. The final test data was executed under this configuration.

Intertek Report No.: 190100336TWN-001 TEST REPORT Page: 10 of 11 2.5 Test equipment Next Calibration Equipment Brand Model No. Serial No. Calibration Date Date Power Meter Anritsu ML2495A 0844001 2018/10/29 2019/10/28 Power Sensor Anritsu MA2411B 0738452 2018/10/29 2019/10/28 RF Cable SUHNER SUCOFLEX 102 CB0006 2018/05/03 2019/05/02 9kHz~26.5GHz 2.6 Test Set-up 20 dB Attenuator & DC block EUT Power sensor Power meter Remark: Cable loss = 1.5 dB

Intertek Report No.: 190100336TWN-001 TEST REPORT Page: 11 of 11 3. Test results Output Output power power Tune-up Max Max Limit of Antenna Power Frequency to to Power Tune-up Tune-up power Distance Mode Channel Gain0 density (MHz) antenna antenna Tolerance Power Power density (cm) (numeric) (mW/cm2) 0 0 (dB) (dBm) (mW) (mW/cm2) (dBm) (mW) Low 902.7 1.58 13.94 24.77 2.00 15.94 39.26 0.00781 1.0 20 DTS Mid 915 1.58 14.17 26.12 2.00 16.17 41.40 0.00824 1.0 20 High 927.3 1.58 14.38 27.42 2.00 16.38 43.45 0.00864 1.0 20 The Notice in Installation Manual has been stated as below: While installing and operating this transmitter, the radio frequency exposure limit of 1 mW/ (cm 2) may be exceeded at distances close to the transmitter. Therefore, the user must maintain a minimum distance of 20 cm from the device at all time.


Document Created: 2019-01-31 17:51:02
Document Modified: 2019-01-31 17:51:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC