Test Report

FCC ID: 2ARRB-E52X75CH

Test Report

Download: PDF
FCCID_4374941

FCC PART 15C TEST REPORT For Meizhou Guo Wei Electronics Co., Ltd AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China FCC ID: 2ARRB-E52X75CH Report Type: Product Type: Original Report Digital Cordless Telephone Report Number: RSZ181218001-00 Report Date: 2019-01-17 Rocky Kang Reviewed By: RF Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 MEASUREMENT UNCERTAINTY ....................................................................................................................................4 TEST FACILITY .............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 JUSTIFICATION .............................................................................................................................................................5 EUT EXERCISE SOFTWARE ..........................................................................................................................................5 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................5 EXTERNAL I/O CABLE..................................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................5 SUMMARY OF TEST RESULTS ...............................................................................................................................6 FCC §1.1310, §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) .............................................................7 APPLICABLE STANDARD ..............................................................................................................................................7 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................8 TEST EQUIPMENT LIST AND DETAILS ...........................................................................................................................8 TEST DATA ..................................................................................................................................................................8 FCC§15.203 – ANTENNA REQUIREMENT ...........................................................................................................11 APPLICABLE STANDARD ............................................................................................................................................11 ANTENNA CONNECTED CONSTRUCTION ....................................................................................................................11 FCC §15.207 – AC LINE CONDUCTED EMISSION .............................................................................................12 APPLICABLE STANDARD ............................................................................................................................................12 EUT SETUP ................................................................................................................................................................12 EMI TEST RECEIVER SETUP .......................................................................................................................................12 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................13 TEST PROCEDURE ......................................................................................................................................................13 CORRECTED FACTOR & MARGIN CALCULATION .......................................................................................................13 TEST RESULTS SUMMARY ..........................................................................................................................................13 TEST DATA ................................................................................................................................................................14 FCC §15.205 & §15.209 - RADIATED EMISSIONS TEST ....................................................................................19 APPLICABLE STANDARD ............................................................................................................................................19 EUT SETUP ................................................................................................................................................................19 EMI TEST RECEIVER SETUP .......................................................................................................................................20 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................20 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................20 TEST RESULTS SUMMARY ..........................................................................................................................................21 TEST DATA ................................................................................................................................................................21 FCC Part 15C Page 2 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 GENERAL INFORMATION Product Description for Equipment Under Test (EUT) The Meizhou Guo Wei Electronics Co., Ltd’s product, model number: Motorola O21-C (FCC ID: 2ARRB-E52X75CH) in this report is a Digital Cordless Telephone, which was measured approximately: 11.0 cm (L) * 7.9 cm (W) * 4.5 cm (H), rated with input voltage: DC 7.5V. Adapter 1 Information: Model: MN-A703-L145 Input: AC 100-240V, 50/60Hz, 0.2A Output: DC 7.5V, 0.3A Adapter 2 Information: Model: HJ-0750300A1-US Input: AC 100-240V, 50/60Hz, 0.15A Output: DC 7.5V, 300 mA * All measurement and test data in this report was gathered from production sample serial number: 181218001 (Assigned by BACL, Shenzhen). The EUT supplied by the applicant was received on 2018-12-18. Objective This report is prepared on behalf of Meizhou Guo Wei Electronics Co., Ltd in accordance with Part 2, Subpart J, and Part 15, Subparts A and C of the Federal Communications Commission’s rules. The objective is to determine the compliance of EUT with FCC rules, section 15.203, 15.205, 15.207 and 15.209. Related Submittal(s)/Grant(s) Submitted with PUE Handset unit submission with FCC ID: 2ARRB-E52X75HS and PUB base unit submission with FCC ID: 2ARRB-E52X75BS. Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. All emissions measurement was performed at Bay Area Compliance Laboratories Corp. (Shenzhen). The radiated testing was performed at an antenna-to-EUT distance of 3 meters. FCC Part 15C Page 3 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 Measurement Uncertainty Item Uncertainty AC Power Line Conducted Emissions ±1.95 dB 9 kHz~30MHz ±4.52 dB Radiated emission 30MHz~1 GHz ±5.81 dB Occupied Bandwidth ±0.5 kHz Temperature ±3.0 ℃ Humidity ±6 ℅ Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Shenzhen) to collect test data is located on the 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China. The test site has been approved by the FCC under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No.: 342867, the FCC Designation No.: CN1221. The test site has been registered with ISED Canada under ISED Canada Registration Number 3062B. FCC Part 15C Page 4 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 SYSTEM TEST CONFIGURATION Justification The system was configured for testing in a test mode The device is a wireless charger operation on frequency 150 kHz. EUT Exercise Software No software used in test. Support Equipment List and Details Manufacturer Description Model Serial Number Guo Wei Handset O211 N/A External I/O Cable Cable Description Length (m) From Port To Shielded detachable USB cable 1.0 EUT Adapter Block Diagram of Test Setup For Conducted Emissions: Handset LISN EUT 10cm Socket Adapter 1.0 meter Non-Conductive Table 80 cm above Ground Plane 1.5 meters FCC Part 15C Page 5 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 SUMMARY OF TEST RESULTS FCC Rules Description of Test Result FCC§1.1310 & Maximum Permissible Exposure(MPE) Compliance §2.1091 FCC§15.203 Antenna Requirement Compliance FCC§15.207 AC Line Conducted Emission Compliance §15.209 §15.205 Radiated Emission Test Compliance FCC Part 15C Page 6 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 FCC §1.1310, §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range Electric Field Magnetic Field Power Density Averaging Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According with KDB 680106 D01 RF Exposure Wireless Charging Apps v03 clause 3 c) According to KDB 680106 D01 RF Exposure Wireless Charging App v03 clause 5 b) FCC Part 15C Page 7 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 Block Diagram of Test Setup 15cm Note: 20 cm for Top test. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Narda Exposure Level Tester ELT-400 N-0215 2018-02-22 2019-02-21 ELT Probe Narda B Field Probe M-0658 2018-02-22 2019-02-21 100cm2 ETS-Lindgren Isotropic Probe HI-6005 00069461 2016-02-29 2019-02-28 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 24°C Relative Humidity: 57 % ATM Pressure: 100.4 kPa The testing was performed by Kiki Kong on 2018-12-27. Test mode: Transmitting FCC Part 15C Page 8 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 For Adapter 1: H-Filed Strength Frequency Position Position Position Position Position 50% Limit Range A B C D E Limit Test (kHz) (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) 150 0.112 0.119 0.111 0.123 0.075 0.815 1.63 Note: Test with 15cm distance from the center of the probe(s) to the edge of the device, 20 cm for top test. E-Filed Strength Frequency Position Position Position Position Position 50% Limit Range A B C D E Limit Test (kHz) (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) 150 2.882 2.45 2.917 4.162 2.312 307 614 Note: Test with 15cm distance from the center of the probe(s) to the edge of the device, 20 cm for top test. Result: Compliance For Adapter 2: H-Filed Strength Frequency Position Position Position Position Position 50% Limit Range A B C D E Limit Test (kHz) (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) 150 0.103 0.116 0.101 0.119 0.073 0.815 1.63 Note: Test with 15cm distance from the center of the probe(s) to the edge of the device, 20 cm for top test. E-Filed Strength Frequency Position Position Position Position Position 50% Limit Range A B C D E Limit Test (kHz) (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) 150 2.746 2.539 2.822 3.804 2.265 307 614 Note: Test with 15cm distance from the center of the probe(s) to the edge of the device, 20 cm for top test. Result: Compliance FCC Part 15C Page 9 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 Considerations of compliance 680106 D01 RF Exposure Wireless Charging App v03 clause 5 b: (1) Power transfer frequency is less than 1 MHz. Yes, the operation frequency is 150 kHz. (2) Output power from each primary coil is less than or equal to 15 watts. Yes, the maximum output power of primary coil is 2.5Watts, less than 15 watts. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. The transfer system includes only single primary coils to detect and allow coupling only between individual pairs of coils. (4) Client device is placed directly in contact with the transmitter. Yes, client device is placed directly in contact with the transmitter (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes, mobile exposure conditions only (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes, the test result for H and E-filed strength less than 50% of the MPE limit. FCC Part 15C Page 10 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 FCC§15.203 – ANTENNA REQUIREMENT Applicable Standard An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. Antenna Connected Construction The EUT has a coil antenna arrangement, which was permanently attached, fulfill the requirement of this section. Please refer to the EUT photos. Result: Compliance. FCC Part 15C Page 11 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 FCC §15.207 – AC LINE CONDUCTED EMISSION Applicable Standard FCC§15.207 EUT Setup The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.207 limits. The spacing between the peripherals was 10 cm. EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz. During the conducted emission test, the EMI test receiver was set with the following configurations: Frequency Range IF B/W 150 kHz – 30 MHz 9 kHz FCC Part 15C Page 12 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Rohde & Schwarz EMI Test Receiver ESCS30 100176 2018-07-11 2019-07-11 3560.6650.12- Rohde & Schwarz LISN ENV216 2018-12-21 2019-12-21 101613-Yb Rohde & Schwarz Transient Limiter ESH3Z2 DE25985 2018-11-12 2019-11-12 Rohde & Schwarz CE Test software EMC 32 V8.53.0 NCR NCR Conducted Emission UF A210B-1- Unknown 78652 2018-11-12 2019-11-12 Cable 0720-504504 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Procedure During the conducted emission test, the adapter was connected to the outlet of the LISN. Maximizing procedure was performed on the six (6) highest emissions of the EUT. All final data was recorded in the Quasi-peak and average detection mode. Corrected Factor & Margin Calculation The Corrected factor is calculated by adding LISN VDF (Voltage Division Factor), Cable Loss and Transient Limiter Attenuation. The basic equation is as follows: Correction Factor = LISN VDF + Cable Loss + Transient Limiter Attenuation The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7 dB means the emission is 7 dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Results Summary According to the recorded data in following table, the EUT complied with the FCC Part 15.207, Refer to CISPR16-4-2:2011 and CISPR 16-4-1:2009, the measured level complies with the limit if Lm + U(Lm) ≤ Llim + Ucispr In BACL, U(Lm) is less than Ucispr, if Lm is less than Llim, it implies that the EUT complies with the limit. FCC Part 15C Page 13 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 Test Data Environmental Conditions Temperature: 24°C Relative Humidity: 57 % ATM Pressure: 100.4 kPa The testing was performed by Haiguo Li on 2018-12-27. Test Mode: charging FCC Part 15C Page 14 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 For Adapter 1: AC 120 V/60 Hz, Line: 90 80 70 QP 60 Level in dBμ AV 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Corrected Correction Frequency Limit Margin Detector Amplitude Factor (MHz) (dBμV) (dB) (PK/Ave./QP) (dBμV) (dB) 0.150000 49.7 19.8 66.0 16.3 QP 0.205500 45.3 19.7 63.4 18.1 QP 0.217500 43.7 19.7 62.9 19.2 QP 0.423670 45.5 19.7 57.4 11.9 QP 3.457410 39.0 20.0 56.0 17.0 QP 3.962210 37.4 20.0 56.0 18.6 QP 0.150000 39.8 19.8 56.0 16.2 Ave. 0.205500 34.6 19.7 53.4 18.8 Ave. 0.217500 33.2 19.7 52.9 19.7 Ave. 0.423670 39.6 19.7 47.4 7.8 Ave. 3.457410 30.2 20.0 46.0 15.8 Ave. 3.962210 27.6 20.0 46.0 18.4 Ave. FCC Part 15C Page 15 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 AC 120V/ 60 Hz, Neutral: 90 80 70 QP 60 Level in dBμ AV 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Corrected Correction Frequency Limit Margin Detector Amplitude Factor (MHz) (dBμV) (dB) (PK/Ave./QP) (dBμV) (dB) 0.189500 44.8 19.7 64.1 19.3 QP 0.309350 44.3 19.8 60.0 15.7 QP 0.344750 36.6 19.7 59.1 22.5 QP 0.348690 36.0 19.7 59.0 23.0 QP 0.419610 40.5 19.7 57.5 17.0 QP 3.837210 36.3 19.9 56.0 19.7 QP 0.189500 32.9 19.7 54.1 21.2 Ave. 0.309350 38.4 19.8 50.0 11.6 Ave. 0.344750 31.1 19.7 49.1 18.0 Ave. 0.348690 30.1 19.7 49.0 18.9 Ave. 0.419610 31.2 19.7 47.5 16.3 Ave. 3.837210 27.4 19.9 46.0 18.6 Ave. Note: 1) Correction Factor =LISN VDF (Voltage Division Factor) + Cable Loss + Transient Limiter Attenuation 2) Corrected Amplitude = Reading + Correction Factor 3) Margin = Limit – Corrected Amplitude FCC Part 15C Page 16 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 For Adapter 2: AC 120 V/60 Hz, Line: 90 80 70 QP 60 Level in dBμ AV 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Corrected Correction Frequency Limit Margin Detector Amplitude Factor (MHz) (dBμV) (dB) (PK/Ave./QP) (dBμV) (dB) 0.158000 51.2 19.8 65.6 14.4 QP 0.181500 47.9 19.8 64.4 16.5 QP 0.309350 44.0 19.8 60.0 16.0 QP 0.340930 44.1 19.7 59.2 15.1 QP 0.360570 45.1 19.7 58.7 13.6 QP 0.388150 40.1 19.7 58.1 18.0 QP 0.158000 43.1 19.8 55.6 12.5 Ave. 0.181500 37.3 19.8 54.4 17.1 Ave. 0.309350 37.7 19.8 50.0 12.3 Ave. 0.340930 37.0 19.7 49.2 12.2 Ave. 0.360570 39.4 19.7 48.7 9.3 Ave. 0.388150 34.7 19.7 48.1 13.4 Ave. FCC Part 15C Page 17 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 AC 120V/ 60 Hz, Neutral: 90 80 70 QP 60 Level in dBμ AV 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Corrected Correction Frequency Limit Margin Detector Amplitude Factor (MHz) (dBμV) (dB) (PK/Ave./QP) (dBμV) (dB) 0.153500 52.3 19.8 65.8 13.5 QP 0.165500 51.4 19.7 65.2 13.8 QP 0.193500 47.4 19.7 63.9 16.5 QP 0.290500 45.0 19.8 60.5 15.5 QP 0.340930 45.3 19.7 59.2 13.9 QP 0.360570 45.3 19.7 58.7 13.4 QP 0.153500 40.5 19.8 55.8 15.3 Ave. 0.165500 37.1 19.7 55.2 18.1 Ave. 0.193500 35.6 19.7 53.9 18.3 Ave. 0.290500 39.6 19.8 50.5 10.9 Ave. 0.340930 37.1 19.7 49.2 12.1 Ave. 0.360570 38.1 19.7 48.7 10.6 Ave. Note: 1) Correction Factor =LISN VDF (Voltage Division Factor) + Cable Loss + Transient Limiter Attenuation 2) Corrected Amplitude = Reading + Correction Factor 3) Margin = Limit – Corrected Amplitude FCC Part 15C Page 18 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 FCC §15.205 & §15.209 - RADIATED EMISSIONS TEST Applicable Standard As per FCC Part 15.209 (a) Except as provided elsewhere in this subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Frequency (MHz) Field strength (microvolts/meter) Measurement distance (meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100** 3 88-216 150** 3 216-960 200** 3 Above 960 500 3 **Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz. However, operation within these frequency bands is permItted under other sections of this part, e.g., §§15.231 and 15.241. EUT Setup The radiated emission tests were performed in the 3-meter chamber test site, using the setup accordance with the ANSI C63.10-2013. The specification used was the FCC Part Subpart C limits. The spacing between the peripherals was 10 cm. FCC Part 15C Page 19 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 EMI Test Receiver Setup The system was investigated from 9 kHz to 1 GHz. During the radiated emission test, the EMI test Receiver was set with the following configurations: Frequency Range RBW Video B/W Measurement 9 kHz – 150 kHz 200 Hz 1 kHz QP/Average 150 kHz – 30 MHz 9 kHz 30 kHz QP/Average 30 MHz – 1000 MHz 120 kHz 300 kHz QP The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector. If the maximized peak measured value complies with the limit, then it is unnecessary to perform an QP/Average measurement Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit - Corr. Ampl. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Sonoma instrument Amplifier 310N 186238 2018-11-12 2019-11-12 Rohde & Schwarz EMI Test Receiver ESCI 101120 2018-01-11 2019-01-11 Sunol Sciences Broadband Antenna JB1 A040904-1 2017-12-22 2020-12-21 ETS Passive Loop Antenna 6512 29604 2018-03-07 2021-03-06 TDK Chamber Chamber A 2# 2016-12-05 2019-12-05 UTiFLEX UFA147A- MFR64639 RF Cable 2018-07-11 2021-07-10 MICRO-C0AX 2362-100100 231029-003 Ducommun RF Cable 104PEA 218124002 2018-11-12 2019-11-12 technologies * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). FCC Part 15C Page 20 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 Test Results Summary According to the data in the following table, the EUT complied with the FCC Part 15.209&15.205. Test Data Environmental Conditions Temperature: 26 oC Relative Humidity: 57 % ATM Pressure: 100.7 kPa The testing was performed by Andy Yu on 2018-12-22. Test mode: Transmitting For Adapter 1 1) 9 kHz~30MHz: FCC Part Frequency Corrected Turntable Rx Antenna Corrected Detector 15.205&15.209 Amplitude Factor Remark (PK/QP/AV) Height Limit Margin (MHz) (dBμV/m) Degree Polar (dB/m) (m) (dBμV/m) (dB) 0.009564 48.90 PK 199 1 H 87.8 127.99 79.09 Spurious 0.4485 59.48 PK 261 1 H 65.7 94.57 35.09 emission 0.15 82.46 PK 261 1 H 87.8 124.08 41.62 Fundamental FCC Part 15C Page 21 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 9 kHz-150 kHz * RBW 300 Hz Marker 1 [T1 ] VBW 1 kHz 48.90 dBµV Ref 130 dBµV * Att 40 dB SWT 1.6 s 9.564000000 kHz 130 9K-150K A 120 1 PK MAXH 110 TDF 100 PS 90 80 3DB 70 AC 60 1 50 40 30 Start 9 kHz 14.1 kHz/ Stop 150 kHz EUT Date: 22.DEC.2018 16:03:04 150 kHz-30 MHz * RBW 10 kHz Marker 1 [T1 ] VBW 30 kHz 59.48 dBµV Ref 102 dBµV * Att 10 dB SWT 300 ms 448.500000000 kHz 100 150K-30M A 90 1 PK MAXH 80 TDF 70 PS 1 60 50 Fundamental 3DB AC 40 30 20 10 Start 150 kHz 2.985 MHz/ Stop 30 MHz EUT Date: 22.DEC.2018 15:59:25 FCC Part 15C Page 22 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 2) 30 MHz ~ 1GHz 80 70 60 Electric Field Strength QP-3m 50 Level in dBμV/ 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Corrected Antenna Turntable Correction Frequency Antenna Limit Margin Amplitude height position Factor (MHz) Polarity (dBμV/m) (dB) (dBμV/m) (cm) (degree) (dB/m) 36.239625 30.41 107.0 V 36.0 -11.3 40.00 9.59 60.417375 26.72 100.0 V 38.0 -20.2 40.00 13.28 84.473125 23.87 151.0 V 20.0 -19.5 40.00 16.13 135.031875 39.37 178.0 H 60.0 -13.9 43.50 0.63 204.812625 38.96 174.0 H 132.0 -13.9 43.50 4.54 206.058750 39.49 169.0 H 122.0 -13.9 43.50 4.01 FCC Part 15C Page 23 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 For Adapter 2 1) 9 kHz~30 MHz: FCC Part Frequency Corrected Turntable Rx Antenna Corrected Detector 15.205&15.209 Amplitude Factor Remark (PK/QP/AV) Height Limit Margin (MHz) (dBμV/m) Degree Polar (dB/m) (m) (dBμV/m) (dB) 0.009846 49.44 PK 191 1 H 87.8 127.74 78.30 Spurious 0.4485 60.68 PK 237 1 H 65.7 94.57 33.89 emission 0.15 82.98 PK 261 1 H 87.8 124.08 41.10 Fundamental FCC Part 15C Page 24 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 9 kHz-150 kHz * RBW 300 Hz Marker 1 [T1 ] VBW 1 kHz 49.44 dBµV Ref 130 dBµV * Att 40 dB SWT 1.6 s 9.846000000 kHz 130 9K-150K A 120 1 PK MAXH 110 TDF 100 PS 90 80 3DB 70 AC 60 1 50 40 30 Start 9 kHz 14.1 kHz/ Stop 150 kHz EUT Date: 22.DEC.2018 16:04:53 150 kHz-30 MHz * RBW 10 kHz Marker 1 [T1 ] VBW 30 kHz 60.68 dBµV Ref 102 dBµV * Att 10 dB SWT 300 ms 448.500000000 kHz 100 150K-30M A 90 1 PK MAXH 80 TDF 70 PS 1 60 Fundamental 50 3DB AC 40 30 20 10 Start 150 kHz 2.985 MHz/ Stop 30 MHz EUT Date: 22.DEC.2018 16:06:55 FCC Part 15C Page 25 of 26

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ181218001-00 2) 30 MHz ~ 1GHz 80 70 60 Electric Field Strength QP-3m 50 Level in dBμV/ 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Corrected Antenna Turntable Correction Frequency Antenna Limit Margin Amplitude height position Factor (MHz) Polarity (dBμV/m) (dB) (dBμV/m) (cm) (degree) (dB/m) 57.941875 26.47 100.0 V 126.0 -20.1 40.00 13.53 65.614375 35.64 100.0 V 282.0 -20.4 40.00 4.36 145.606500 38.29 203.0 H 62.0 -14.2 43.50 5.21 152.601625 39.80 224.0 H 58.0 -14.3 43.50 3.70 210.718000 34.44 149.0 H 121.0 -13.9 43.50 9.06 827.265250 36.18 239.0 H 113.0 4.6 46.00 9.82 Note: Corrected Amplitude = Corrected Factor + Reading Corrected Factor=Antenna factor (RX) + cable loss - amplifier factor Margin = Limit- Corr. Amplitude Result: Compliance ***** END OF REPORT ***** FCC Part 15C Page 26 of 26


Document Created: 2019-07-23 18:20:32
Document Modified: 2019-07-23 18:20:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC