Test Report_NII_5G DFS

FCC ID: 2ARHS-W562

Test Report

Download: PDF
FCCID_4114533

REPORT No.：SZ18100025W07 TEST REPORT APPLICANT : Hyco Genyong Technology Co., Ltd. PRODUCT NAME : Smart Watch MODEL NAME : W562 BRAND NAME : HYCO FCC ID : 2ARHS-W562 STANDARD(S) : 47 CFR Part 15 Subpart E TEST DATE : 2018-10-18 to 2018-10-20 ISSUE DATE : 2018-11-07 Tested by: Wang Meng (Test Engineer) Approved by: Peng Huarui ( Supervisor ) NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn

REPORT No.：SZ18100025W07 DIRECTORY 1. Technical Information ··················································································· 4 1.1. Applicant and Manufacturer Information ······················································· 4 1.2. Companion Equipment(Master) Description ·················································· 4 1.3. Equipment Under Test (EUT) Description ······················································ 4 1.4. The channel number and frequency of EUT ··················································· 6 1.5. Test Standards and Results ········································································ 7 1.6. Environmental Conditions ·········································································· 7 2. 47 CFR Part 15C Requirements ······································································ 8 2.1. Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) ··········· 8 Annex A The waveform of the radar ·································································· 19 Annex B Test Uncertainty ················································································ 22 Annex C Testing Laboratory Information ··························································· 23 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 2 of 24

REPORT No.：SZ18100025W07 Change History Issue Date Reason for change 1.0 2018-11-07 First edition MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 3 of 24

REPORT No.：SZ18100025W07 1. Technical Information Note: Provide by applicant. 1.1. Applicant and Manufacturer Information Applicant: Hyco Genyong Technology Co., Ltd. Applicant Address: Room 105, 1/F, Building B, No.999 of Huaxu Road, Qingpu District, Shanghai, CN Manufacturer: HYCO Information Technology Co., Ltd Manufacturer Address: Room 3A07, Tower B, North Zone, No.999, Huaxu Road, Qingpu District, Shanghai, CN 1.2. Companion Equipment(Master) Description Product Name: Router Manufacturer: Cisco FCC ID: LDK102091 Serial No: FGL1848X9S5 Antenna Gain: 2.1 dBi 1.3. Equipment Under Test (EUT) Description Product Name: Smart Watch Serial No: (N/A, marked #1 by test site) Hardware Version: W562_V1.2 Software Version: W562-FL_6.0_20180625_1408 Modulation Type: OFDM Modulation Mode: 802.11a, 802.11n(HT20), 802.11n(HT40) 5.180 GHz- 5.240 GHz; 5.260 GHz -5.320 GHz ; Operating Frequency Range: 5.745GHz- 5.825GHz Channel Number: Refer to 1.3 Antenna Type: FPC Antenna Antenna Gain: -0.23 dBi MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 4 of 24

Cll REPORT No.: $218100025W07 Battery Brand Name: HYCO Model No.: 964G55P Serial No.: (N/A, marked #1 by test site) Capacity: 3600mAh Rated Voltage: 3.8V Charge Limit: 4.35V AC Adapter 1 Brand Name: AOHAI Accessory Information: Model No.: A18A—050100U—US2 Serial No.: (N/A, marked #1 by test site) Rated Input: ~ 100—240V, 50/60H2z, 0.2A Rated Output: =65V, 1A AC Adapter 2 Brand Name: N/A Model No.: UT—146A—5100 Serial No.: (N/A, marked #1 by test site) Rated Input: ~ 100—240V, 50/60H2z, 0.15A Rated Output: =5V, 1A Note 1: The EUT has two adaptors, both of the two adaptors were tested, only the worst test result(Adapter1) were recorded in the test report. Note 2: For a more detailed description, please refer to Specification or User‘s Manual supplied by the applicant and/or manufacturer. SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36608555 Fax: 86—755—36808525 M o R LA B FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Bock7, BaoAn Distrct, ShenZhen , GuangDong Province, P. R. China Hitp?/wen.mortab.on E—mail: service@morlab.on Page 5 of 24

REPORT No.：SZ18100025W07 1.4. The channel number and frequency of EUT Frequency Range: 5180MHz-5240MHz Bandwidth Channel Frequency (MHz) Channel Frequency (MHz) 36 5180 40 5200 20MHz 44 5220 48 5240 40MHz 38 5190 46 5230 Frequency Range: 5260MHz-5320MHz Bandwidth Channel Frequency (MHz) Channel Frequency (MHz) 52 5260 56 5280 20MHz 60 5300 64 5320 40MHz 54 5270 62 5310 Frequency Range: 5745-5825MHz Bandwidth Channel Frequency (MHz) Channel Frequency (MHz) 149 5745 153 5765 20MHz 157 5785 161 5805 165 5825 40MHz 151 5775 159 5795 Note 1: The black bold channels were selected for test. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 6 of 24

REPORT No.：SZ18100025W07 1.5. Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 15 Subpart E (U-NII band) for the EUT FCC ID Certification: No Identity Document Title 1 47 CFR Part 15 (5-1-14 Edition) Radio Frequency Devices Test detailed items/section required by FCC rules and results are as below: No. Section Description Test Date Test Engineer Result 1 15.407(h) TPC and DFS Oct 19, 2018 Tu Ya’nan PASS Note2: The DFS section for U-NII band is applicable to this report, the other test items are documented in a separate report. Note3: These RF tests were performed according to the method of measurements prescribed in KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02. 1.6. Environmental Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15 - 35 Relative Humidity (%): 30 -60 Atmospheric Pressure (kPa): 86-106 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 7 of 24

REPORT No.：SZ18100025W07 2. 47 CFR Part 15C Requirements 2.1. Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) 2.1.1. Requirement According to FCC section 15.407(h), (1) Transmit power control (TPC). U-NII devices operating in the 5.25-5.35 GHz band and the 5.47-5.725 GHz band shall employ a TPC mechanism. The U-NII device is required to have the capability to operate at least 6 dB below the mean EIRP value of 30 dBm. A TPC mechanism is not required for systems with an e.i.r.p. of less than 500 mW.(2) Radar Detection Function of Dynamic Frequency Selection (DFS). U-NII devices operating with any part of its 26 dB emission bandwidth in the 5.25-5.35 GHz and 5.47-5.725 GHz bands shall employ a DFS radar detection mechanism to detect the presence of radar systems and to avoid co-channel operation with radar systems. Operators shall only use equipment with a DFS mechanism that is turned on when operating in these bands. The device must sense for radar signals at 100 percent of its emission bandwidth. The minimum DFS detection threshold for devices with a maximum e.i.r.p. of 200 mW to 1 W is −64 dBm. For devices that operate with less than 200 mW e.i.r.p. and a power spectral density of less than 10 dBm in a 1 MHz band, the minimum detection threshold is −62 dBm. The detection threshold is the received power averaged over 1 microsecond referenced to a 0 dBi antenna. For the initial channel setting, the manufacturers shall be permitted to provide for either random channel selection or manual channel selection. A U-NII network will employ a DFS function to detect signals from radar systems and to avoid co-channel operation with these systems. This applies to the 5250-5350 MHz and/or 5470-5725 MHz bands.1 Within the context of the operation of the DFS function, a U-NII device will operate in either Master Mode or Client Mode. U-NII devices operating in Client Mode can only operate in a network controlled by a U-NII device operating in Master Mode.2 Tables 1 and 2 shown below summarize the information contained in sections 5.1.1 and 5.1.2. Table 1: Applicability of DFS Requirements Prior to Use of a Channel Operational Mode Requirement Client Without Radar Client With Radar Master Detection Detection Non-Occupancy Period Yes Not required Yes DFS Detection Threshold Yes Not required Yes Channel Availability Check Time Yes Not required Not required U-NII Detection Bandwidth Yes Not required Yes MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 8 of 24

REPORT No.：SZ18100025W07 Table 2: Applicability of DFS requirements during normal operation Operational Mode Requirement Master Client Without Radar Detection DFS Detection Threshold Yes Not required Channel Closing Transmission Time Yes Yes Channel Move Time Yes Yes U-NII Detection Bandwidth Yes Not required Additional requirements for Master Device or Client Client Without Radar devices with multiple with Radar Detection Detection bandwidth modes U-NII Detection Bandwidth and All BW modes must be tested Not required Statistical Performance Check Channel Move Time and Channel Test using widest BW mode Test using the widest BW Closing Transmission Time available mode available for the link All other tests Any single BW mode Not required Note: Frequencies selected for statistical performance check (Section 7.8.4) should include several frequencies within the radar detection bandwidth and frequencies near the edge of the radar detection bandwidth. For 802.11 devices it is suggested to select frequencies in each of the bonded 20 MHz channels and the channel center frequency. The operational behavior and individual DFS requirements that are associated with these modes are as follows: Master Devices a) The Master Device will use DFS in order to detect Radar Waveforms with received signal strength above the DFS Detection Threshold in the 5250 − 5350 MHz and 5470 − 5725 MHz bands. DFS is not required in the 5150 − 5250 MHz or 5725 − 5825 MHz bands. b) Before initiating a network on a Channel, the Master Device will perform a Channel Availability Check for specified time duration (Channel Availability Check Time) to ensure that there is no radar system operating on the Channel, using DFS described under subsection a) above. c) The Master Device initiates a U-NII network by transmitting control signals that will enable other U-NII devices to Associate with the Master Device. d) During normal operation, the Master Device will monitor the Channel (In-Service Monitoring) to ensure that there is no radar system operating on the Channel, using DFS described under a). e) If the Master Device has detected a Radar Waveform during In-Service Monitoring as described under d), the Operating Channel of the U-NII network is no longer an Available Channel. The Master Device will instruct all associated Client Device(s) to stop transmitting on this Channel within the Channel Move Time. The transmissions during the Channel Move Time will be limited to the Channel Closing Transmission Time. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 9 of 24

REPORT No.：SZ18100025W07 f) Once the Master Device has detected a Radar Waveform it will not utilize the Channel for the duration of the Non-Occupancy Period. 3 g) If the Master Device delegates the In-Service Monitoring to a Client Device, then the combination will be tested to the requirements described under d) through f) above. Client Devices a) A Client Device will not transmit before having received appropriate control signals from a Master Device. b) A Client Device will stop all its transmissions whenever instructed by a Master Device to which it is associated and will meet the Channel Move Time and Channel Closing Transmission Time requirements. The Client Device will not resume any transmissions until it has again received control signals from a Master Device. c) If a Client Device is performing In-Service Monitoring and detects a Radar Waveform above the DFS Detection Threshold, it will inform the Master Device. This is equivalent to the Master Device detecting the Radar Waveform and d) through f) of section 5.1.1 apply. d) Irrespective of Client Device or Master Device detection the Channel Move Time and Channel Closing Transmission Time requirements remain the same. e) The client test frequency must be monitored to ensure no transmission of any type has occurred for 30 minutes. Note: If the client moves with the master, the device is considered compliant if nothing appears in the client non-occupancy period test. For devices that shut down (rather than moving channels), no beacons should appear. DFS Detection Thresholds Table 3 below provides the DFS Detection Thresholds for Master Devices as well as Client Devices incorporating In-Service Monitoring. Table 3: DFS Detection Thresholds for Master Devices and Client Devices with Radar Detection Maximum Transmit Power Value (See Notes 1, 2, and 3) EIRP ≥ 200 milliwatt -64 dBm EIRP < 200 milliwatt and -62 dBm power spectral density < 10 dBm/MHz EIRP < 200 milliwatt that do not meet the power spectral -64 dBm density requirement Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna. Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test transmission waveforms to account for variations in measurement equipment. This will ensure that the test signal is at or above the detection threshold level to trigger a DFS response. Note3: EIRP is based on the highest antenna gain. For MIMO devices refer to KDB Publication 662911 D01. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 10 of 24

ORLAB, ' REPORT No.: $Z18100025WO7 Response Requirements Table 4 provides the response requirements for Master and Client Devices incorporating DFS. Table 4: DFS Response Requirement Values Parameter Value Non—occupancy period Minimum 30 minutes Channel Availability Check Time 60 seconds Channel Move Time 10 seconds See Note 1. Channel Closing Transmission Time 200 milliseconds + an aggregate of 60 milliseconds over remaining 10 second period. See Notes 1 and 2. U—NII Detection Bandwidth Minimum 100% of the U—NII 99% transmission power bandwidth. See Note 3. Note 1: Channel Move Time and the Channel Closing Transmission Time should be performed with Radar Type 0. The measurement timing begins at the end of the Radar Type 0 burst. Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. Note 3: During the U—NII Detection Bandwidth detection test, radar type 0 should be used. For each frequency step the minimum percentage of detection is 90 percent. Measurements are performed with no data traffic. 2.1.2. Test Description According to Section 7.2 of KDB 905462 DO2 VO1RO1 1. Setup for Master with injection at the Master Radar Test Signal Generator Oumth L‘wl* Splitter! 2wey 2—Way uUT Combiner CS;L'::;F; O (Master) Spectrum Analyzer i (with 10 dB internal chent Attenuation) 0 O (Example Conducted Setup where UUT is a Master and Radar Test Waveforms are injected into the Master) SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36c00555 Fax: 86—755—36600525 MORL AB 512. Buteing AFeivang Science Par, No.8 LongChang Road, Block67, BacAn District, Shenzhen , GuangDong Province, P. R. China Hitp://www.morlab.on E—mail service@morkb.cn Page 11 of 24

REPORT No.: $Z18100025W07 2. Setup for Client with injection at the Master Radar Test ho Signal Generator Master Output Q a E ATT 104B 2—Way 2—Way Splitter‘ Splitter/ | ATT 30 0B ! Combiner Combiner O O Spectrum UUT Analyzer (Client) (with 10 dB internal Aftenuation} (Example Conducted Setup where UUT is a Client and Radar Test Waveforms are injected into the Master) 3. Setup for Client with injection at the Client Radar Test Signal Generator Ouput ATT 10 0B 2—Way Splitter/ Combiner k——Laxz=]— 2—Way Splitter/ uUuT 1O —(Client) Combiner |_z#] Spectrum Analyzer (with 10 dB internal Master Aftenuation) 0 O (Example Conducted Setup where UUT is a Client and Radar Test Waveforms are injected into the Client) SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86—755—36608555 Fax: 86—755—36600525 MORLAB FL1—3, Bulding A, FeiYang Science Park, No.8 LongChang Road, Block§7, BaoAn District, ShenZhen , GuangDong Province, P. R. China Hitpuiwaw.morlab.on E—mail: service@morlab.on Page 12 of 24

REPORT No.：SZ18100025W07 2.1.3. Test Result a. Test sequence and Channel loading between Master and Client Test Channel Frequency(MHz) Payload 62 5310 40.13% (Test sequence) (Payload) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 13 of 24

REPORT No.：SZ18100025W07 b. Radar Test Waveforms are injected into the Master: c. EUT is a Client Device Without Radar Detection : Operational Channel & Mode Test Requirement Limit Verdict Bandwidth Client Without Result Radar Detection Channel Move Time Yes 0.63s ＜10s PASS 802.11 n(HT40) Channel Closing 5230MHz Yes 0.002s ＜1s PASS Transmission Time Channel Move Time Yes 0.62s ＜10s PASS 802.11 n(HT40) Channel Closing 5310MHz Yes 0.003s ＜1s PASS Transmission Time MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 14 of 24

REPORT No.：SZ18100025W07 Test Plots Note: T0 denotes the start time of the Radar single transmitted, T1 denotes the end time of the Radar single transmit end. T2 denotes the data transmission time of 200ms from T1. T3 denotes the end of the Channel Move Time, the time of T3 from T1 is less than 12s. (5230MHz, 802.11n (HT40)) (5310MHz, 802.11n (HT40)) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 15 of 24

REPORT No.：SZ18100025W07 d. Time per bin Channel Frequency (MHz) Time Per Bin (ms) 46 5230 0.50 62 5310 0.50 Test Plot (5230MHz, 802.11n (HT40)) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 16 of 24

REPORT No.：SZ18100025W07 (5310MHz, 802.11n (HT40)) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 17 of 24

REPORT No.：SZ18100025W07 e. verification of Non-occupancy time The sweep time is 2.1ks(35min) which is able to meet the requirements of Non-occupancy time. Channel & Bandwidth Test Result Limit Verdict 802.11 n (HT40) 35min ≥30min PASS 5270MHz (Non-occupancy time, 5270MHz, 802.11n (HT40)) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 18 of 24

REPORT No.：SZ18100025W07 Annex A The waveform of the radar (Type 0) (Type 1) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 19 of 24

REPORT No.：SZ18100025W07 (Type 2) (Type 3) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 20 of 24

REPORT No.：SZ18100025W07 (Type 4) (Type 5) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 21 of 24

REPORT No.：SZ18100025W07 Annex B Test Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for test performed on the EUT as specified in CISPR 16-1-2: Test items Uncertainty Bandwidth ±5% Conducted Emission ±2.44dB This uncertainty represent an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 22 of 24

REPORT No.：SZ18100025W07 Annex C Testing Laboratory Information 1. Identification of the Responsible Testing Laboratory Company Name: Shenzhen Morlab Communications Technology Co., Ltd. Department: Morlab Laboratory Address: FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Responsible Test Lab Mr. Su Feng Manager: Telephone: +86 755 36698555 Facsimile: +86 755 36698525 2. Identification of the Responsible Testing Location Shenzhen Morlab Communications Technology Co., Ltd. Name: Morlab Laboratory FL.3, Building A, FeiYang Science Park, No.8 LongChang Address: Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China 3. Facilities and Accreditations All measurement facilities used to collect the measurement data are located at FL.3, Building A, FeiYang Science Park, Block 67, BaoAn District, Shenzhen, 518101 P. R. China. The test site is constructed in conformance with the requirements of ANSI C63.10-2013 and CISPR Publication 22; the FCC designation number is CN1192, the test firm registration number is 226174. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 23 of 24

REPORT No.：SZ18100025W07 4. Test Equipments Utilized 4.1 Conducted Test Equipments Equipment Name Serial No. Type Manufacturer Cal. Date Cal. Due Power Splitter NW521 1506A Weinschel 2018.04.17 2019.04.16 Attenuator 1 (N/A.) 10dB Resnet 2018.04.17 2019.04.16 Attenuator 2 (N/A.) 3dB Resnet 2018.04.17 2019.04.16 EXA Signal MY53470836 N9010A Agilent 2017.12.03 2018.12.02 Analzyer MXG Vector Signal Angilent N5182B MY53050961 2018.04.17 2019.04.16 Generator RF cable CB01 RF01 Morlab N/A N/A (30MHz-26GHz) Coaxial cable CB02 RF02 Morlab N/A N/A HUBER- SMA connector CN01 RF03 N/A N/A SUHNER 4.2Auxiliary Test Equipment Equipment Name Model No. Brand Name Manufacturer Cal.Date Cal. Due Computer T430i Think Pad Lenovo N/A N/A END OF REPORT MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 24 of 24


Document Created: 2019-09-22 12:31:09
Document Modified: 2019-09-22 12:31:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC