RF Exposure

FCC ID: 2ARGX-WIFIM

RF Exposure Info

Download: PDF
FCCID_4249363

Bay Area Compliance Laboratories Corp. (Taiwan) No.: RLK1810002-00B 5 FCC §15.407(f), §1.1310, § 2.1091 - Maximum Permissible Exposure (MPE) 5.1 Applicable Standard According to§15.407(f) and §1.1310, U-NII devices are subject to the radio frequency radiation exposure requirements specified in §1.1307(b), and 2.1091 of this chapter, as appropriate. All equipment shall be considered to operate in a "general population/uncontrolled" environment. Applications for equipment authorization of devices operating under this section must contain a statement confirming compliance with these requirements for both fundamental emissions and unwanted emissions. Technical information showing the basis for this statement must be submitted to the Commission upon request. 5.2 RF Exposure Evaluation Result MPE evaluation for single transmission: Frequency Antenna Gain Target Power Evaluation Power MPE Mode Range Distance Density Limit (MHz) (dBi) (numeric) (dBm) (mW) (cm) (mW/cm2) (mW/cm2) 5G WIFI 5150-5250 6.5 4.467 18 63.096 20 0.0561 1 B1 5G WIFI 5250-5350 6.5 4.467 18 63.096 20 0.0561 1 B2 5G WIFI 5470-5725 6.5 4.467 18 63.096 20 0.0561 1 B3 5G WIFI 5725-5850 6.5 4.467 17 50.119 20 0.0445 1 B4 Note: the maximum antenna gain was used for evaluation. Result: MPE evaluation of single and simultaneous transmission meet 20cm the requirement of standard. Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Taiwan) Page 19 of 205


Document Created: 2019-04-24 02:23:20
Document Modified: 2019-04-24 02:23:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC