18_IPC100 RFExp

FCC ID: 2ARER-IPC100

RF Exposure Info

Download: PDF
FCCID_4239191

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE164660 Page: 1 of 4 Maximum Permissible Exposure Evaluation FCC ID: 2ARER-IPC100 1. Client Information Applicant : Shenzhen Apeman Innovations Technology Co.,Ltd Addres : Building P11, Huanancheng, Longgang District, Shenzhen, China Manufacturer : Shenzhen Apeman Innovations Technology Co.,Ltd Address : Building P11, Huanancheng, Longgang District, Shenzhen, China TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE164660 Page: 2 of 4 2. General Description of EUT EUT Name : Nooie Cam 360 Models No. : IPC100 Model : N/A Difference 802.11b/g/n(HT20): 2412MHz~2462MHz Operation Frequency: 802.11n(HT40): 2422MHz~2452MHz Product : Max Output Power: WIFI: 16.76dBm Description Antenna Gain: 0.63dBi PIFA Antenna Power : DC Voltage supplied by AC/DC Adapter Supply AC/DC Adapter (TPA-46B050100UU): Power Rating : Input: AC 100~240V, 50/60Hz, 0.2A. Output: DC 5V, 1000mA. Connecting : Please refer to the User's Manual I/O Port(S) TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE164660 Page: 3 of 4 MPE Calculations for WIFI 1. Antenna Gain: PIFA Antenna: 0.63dBi. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Conducted Max tune up Power Turn-up ANT Gain Distance Density Power(max) power Mode Power (dBi) (cm) 2 (dBm) (dBm) (mW/ cm ) (dB) [G] [R] [P] [S] 802.11b 16.76 16±1 17 0.63 20 0.011528 802.11g 15.61 15±1 16 0.63 20 0.009157 802.11n 14.56 14±1 15 0.63 20 0.007273 (HT20) 802.11n 14.18 14±1 15 0.63 20 0.007273 (HT40) TB-RF-075-1.0

Report No.: TB-MPE164660 Page: 4 of 4 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For 802.11b/g/n:2412~2462 MHz MPE limit S: 1mW/ cm2 The MPE is calculated as 0.011528mW / cm2 < limit 1mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-075-1.0


Document Created: 2019-03-29 10:23:19
Document Modified: 2019-03-29 10:23:19
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC