RF Exposure report

FCC ID: 2ARER-IPC007HD

RF Exposure Info

Download: PDF
FCCID_4047974

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE162125 Page: 1 of 4 Maximum Permissible Exposure Evaluation FCC ID: 2ARER-IPC007HD 1. Client Information Applicant : Shenzhen Apeman Innovations Technology Co.,Ltd Addres : Building P11, Huanancheng, Longgang District, Shenzhen, China Manufacturer : Shenzhen Apeman Innovations Technology Co.,Ltd Address : Building P11, Huanancheng, Longgang District, Shenzhen, China TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE162125 Page: 2 of 4 2. General Description of EUT EUT Name : Nooie Cam Indoor Models No. : IPC007-720P Model All these models are identical in the same PCB layout and electrical : Difference circuit, the only difference is model name and color for commercial. 802.11b/g/n(HT20): 2412MHz~2462MHz Operation Frequency: 802.11n(HT40): 2422MHz~2452MHz Product : Max Output Power: WIFI: 15.73 dBm Description Antenna Gain: 2.28dBi PIFA Antenna Power : DC Voltage supplied by AC/DC Adapter Supply AC/DC Adapter (HA-19050100UU): Power Rating : Input: AC 100~240V, 50/60Hz, 0.25A. Output: DC 5V, 1A. Connecting : Please refer to the User's Manual I/O Port(S) TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE162125 Page: 3 of 4 MPE Calculations for WIFI 1. Antenna Gain: PIFA Antenna: 2.28dBi. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Conducted Max tune up Power Turn-up ANT Gain Distance Density Power(max) power Mode Power (dBi) (cm) 2 (dBm) (dBm) (mW/ cm ) (dB) [G] [R] [P] [S] 802.11b 15.73 16±1 17 2.28 20 0.016864 802.11g 14.74 15±1 16 2.28 20 0.013395 802.11n 13.80 14±1 15 2.28 20 0.010640 (HT20) 802.11n 12.21 13±1 14 2.28 20 0.008452 (HT40) TB-RF-075-1.0

Report No.: TB-MPE162125 Page: 4 of 4 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For 802.11b/g/n:2412~2462 MHz For Bluetooth/BLE: 2402MHz~2480MHz MPE limit S: 1mW/ cm2 The MPE is calculated as 0.016864mW / cm2 < limit 1mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-075-1.0


Document Created: 2018-10-25 09:15:11
Document Modified: 2018-10-25 09:15:11
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC