RF exposure

FCC ID: 2ARD3-LA120

RF Exposure Info

Download: PDF
FCCID_4416876

( fltl Report Number: 1908FS12 \‘ Rev.00 SAR Exclusion Evaluation Report Applicant : LEXON Product Type : MINO X Trade Name : LEXON Model Number : LA120 Test Specification : ANSL / IEEE Std.C95.1—1992 / IEEE Std. 1528—2013 47 CFR § 2.1098 / KDB 865664 DO1 v01r04 KDB 865664 D02 v01r02 / KDB 447498 DO1 v06 Received Date _ Jun. 11, 2019 Test Period _ Jul. 10, 2019 Issue Date : Aug. 12, 2019 Issue by Approved By : L w Tested By _‘ Ka S Fg\v\ (Jet Lu) (Kris Pan) A Test Lab Techno Corp. No. 140—1, Changan Street, Bade District, Taoyuan City 33465, Taiwan (R.O.C.) Tel : +886—3—2710188 / Fax : +886—3—2710190 Taiwan Accreditation Foundation accreditation number: 1330 Test Firm MRA designation number: TWO010 Note: 1 The test results are valid. only for samples provided by customers and under the test conditions described in this report. 2.This report shall not be reproduced except in full, without the wnitten approval af A Test Lab Technology Corporation. 3.The relevant information is provided by customers in this test report. According to the correciness, appropriateness or completeness of the information provided by the customer, if there is any doubt or error in the information which affects the validity of the test results, the laboratory daes not take the responsibility. Page 1 of 8

Report Number: 1908FS12 Rev.00 Revision History Rev. Issue Date Revisions Revised By 00 Aug. 12, 2019 Initial Issue Jennifer Liu Page 2 of 8

Report Number: 1908FS12 Rev.00 Contents 1. Description of Equipment under Test (EUT) ...............................................................5 2. Reference Testing Standards .......................................................................................4 3. SAR Test Exclusion .......................................................................................................6 3.1 Conducted Power ...............................................................................................7 3.2 Antenna Location ................................................................................................7 3.3 Evaluation Results ..............................................................................................8 Page 3 of 8

Report Number: 1908FS12 Rev.00 1. Reference Testing Standards Standard Description Version American National Standard safety levels with respect to human ANSI/IEEE C95.1 exposure to radio frequency electromagnetic fields, 300 kHz to 100 1992 GHz, New York. IEEE Recommended Practice for Determining the Peak IEEE 1528 Spatial-Average Specific Absorption Rate (SAR) in the Human Head 2013 From Wireless Communications Devices: Measurement Techniques. FCC 47 CFR Part 2.1093 Radiofrequency radiation exposure evaluation: portable devices. --- SAR measurement 100 MHz to 6 GHz - describes SAR FCC KDB 865664 D01 measurement procedures for devices operating between 100 MHz to v01r04 6 GHz RF Exposure Reporting - provides general reporting requirements as FCC KDB 865664 D02 well as certain specific information required to support MPE and SAR v01r02 compliance. General RF Exposure Guidance - provides guidance pertaining to FCC KDB 447498 D01 RF exposure requirements for mobile and portable device equipment v06 authorizations. Page 4 of 8

Report Number: 1908FS12 Rev.00 2. Description of Equipment under Test (EUT) LEXON Applicant 91 avenue Jean-Baptiste Clément - 92100 Boulogne - FRANCE LEXON Manufacturer 91 avenue Jean-Baptiste Clément - 92100 Boulogne - FRANCE Product Type MINO X Trade Name LEXON Model Number LA120 FCC ID 2ARD3-LA120 Frequency Range Operate Band Frequency Range (MHz) Bluetooth LE 2402 - 2480 Max. Gain Type Antenna information (dBi) Inverted F Antenna -0.58 The above equipment was tested by A Test Lab Techno Corp. For compliance with the requirements set forth in 47 CFR § 2.1093. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Page 5 of 8

Report Number: 1908FS12 Rev.00 3. SAR Test Exclusion As RF exposure evaluation of portable device, SAR test is not required when the evaluation results. According to KDB 447498 4.3.1, unless excluded by specific FCC test procedures, portable devices shall include SAR data for equipment approval. SAR test necessity will be based on the exclusion result. The test exclusion refers KDB 447498 as below: ≤50 mm: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR >50 mm and <200 mm: a) [Power allowed at numeric threshold for 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100 MHz to 1500 MHz b) [Power allowed at numeric threshold for 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz Page 6 of 8

Report Number: 1908FS12 Rev.00 3.1 Conducted Power The conducted power turn-up tolerance, please reference manufacturer specification. Frequency Average Conducted power Operate Band Packet Type (MHz) (dBm) DH1 5.06 2402.0 DH3 5.09 DH5 5.11 Bluetooth BR DH1 5.20 2441.0 DH3 5.22 GFSK DH5 5.25 DH1 4.93 2480.0 DH3 4.95 DH5 4.98 DH1 3.83 2402.0 DH3 3.85 DH5 3.88 Bluetooth EDR DH1 4.00 2441.0 DH3 4.03 π/4-DQPSK DH5 4.06 DH1 3.71 2480.0 DH3 3.74 DH5 3.76 3.2 Antenna Location Antenna to user distance Ant. Used (mm) Front Back Bluetooth Antenna 5 5 Note：We use a minimum distance of 5mm for bluetooth function. Page 7 of 8

Report Number: 1908FS12 Rev.00 3.3 Evaluation Results The evaluation of SAR test reduction according to KDB447498 SAR test is not required when the results showed “EXEMPT”. SAR test reduction Frequency Power Calculated threshold value Ant. Used Band (GHz) (dBm) (mW) Front Back 1.3 1.3 DSS Bluetooth LE 2.48 6 3.981 EXEMPT EXEMPT Exclusion Considerations: SAR is not required Note: 1. Calculated Value include string "mW",that is meam through compare output power with threshold, if the output power more than threshold value the SAR test should be perform. Otherwise,the SAR test could be exempt. (> 50mm) 2. Calculated Value only inculde number format, that is mean through compare output power with threshold, if the Calculated value more than 3, the SAR test should be perform. Otherwise, the SAR test could be exempt. (<50mm) 3. When an antenna qualifies for the standalone SAR test exclusion of KDB 447498 section 4.3.1 and also transmits simultaneously with other antennas, the standalone SAR value must be estimated according to KDB 447498 section "4.3.2. Simultaneous transmission SAR test exclusion considerations b) " 4. We used highest frequency and power,that result should be evaluated the worst case. 5. Power and distance are rounded to the nearest mW and mm before calculation. 6. The result is rounded to one decimal place for comparison. 7. We use a minimum distance of 5mm for bluetooth function. ---END--- Page 8 of 8


Document Created: 2019-08-28 12:58:12
Document Modified: 2019-08-28 12:58:12
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC