18_CS158-AF RFExp

FCC ID: 2ARBY-CS158-137-AF

RF Exposure Info

Download: PDF
FCCID_4256394

                                     MPE REPORT

                                        FCC ID: 2ARBY-CS158-137-AF


                                     Date of issue: Apr. 20, 2019



       Report Number:                         MTi190411E071


       Sample Description:                    Smart Air Fryer


       Model(s):                              CS158-AF, CS137-AF


       Applicant:                             Arovast Corporation


       Address:
                                              1202 N Miller St. Suite A, Anaheim, CA 92806, USA



       Date of Test:                          Mar. 29, 2019 to Apr. 20, 2019




                                         Shenzhen Microtest Co., Ltd.
                                                http://www.mtitest.com




This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen
Microtest Co., Ltd.

  Tel:(86-755)88850135            Fax: (86-755) 88850136                   Web: http://www.mtitest.com           E-mail: mti@51mti.com
  Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


                                                       - Page 2 of 4 -                        Report No.: MTi190411E071




                                  TEST RESULT CERTIFICATION
Applicant’s name:                       Arovast Corporation
Address:                                1202 N Miller St. Suite A, Anaheim, CA 92806, USA
Manufacture's Name:                     Zhejiang Tianxi Kitchen Appliance Co.,Ltd
Address:                                No.1 West 2nd Road, Huzhen Town, Jinyun, Lishui, Zhejiang,
                                        China
Product name:                           Smart Air Fryer
Trademark:                              COSORI
Model and/or type reference . : CS158-AF
Serial Model:                           CS137-AF
RF Exposure Procedures:                 KDB 447498 D01 v06


This device described above has been tested by Shenzhen Microtest Co., Ltd and the test results
show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is
applicable only to the tested sample identified in the report.




                  Tested by:


                                                               Demi Mu                             Apr. 20, 2019


                Reviewed by:


                                                               Blue Zheng                          Apr. 20, 2019

               Approved by:

                                                               Smith Chen                          Apr. 20, 2019




 Tel:(86-755)88850135         Fax: (86-755) 88850136                Web: http://www.mtitest.com         E-mail: mti@51mti.com
 Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


                                                       - Page 3 of 4 -                        Report No.: MTi190411E071

RF EXPOSURE EVALUATION
According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment
impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b)



Limits for Maximum Permissible Exposure (MPE)




MPE Calculation Method



Friis transmission formula: Pd= (Pout*G)\ (4*pi*R2)
Where

Pd= Power density in mW/cm2

Pout=output power to antenna in mW

G= Numeric gain of the antenna relative to isotropic antenna

Pi=3.1415926

R= distance between observation point and center of the radiator in cm(20cm)

Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the
antenna, through the calculation, we will know the distance where the MPE limit is reached.




 Tel:(86-755)88850135         Fax: (86-755) 88850136                Web: http://www.mtitest.com         E-mail: mti@51mti.com
 Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


                                                        - Page 4 of 4 -                         Report No.: MTi190411E071




     Measurement Result

WIFI:
Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz,

                           Power density limited: 1mW/ cm2

Antenna Type: FPCB Mounted Embedded Antenna;
WIFI antenna gain: 2.05 dBi

R=20cm

mW=10^(dBm/10)

antenna gain Numeric=10^(dBi/10)= 10^(2.05/10)=1.60




                                                                                                                         Power
                              conducted    Tune-up                                               Evaluation result at
                                                                 Max                Antenna                              density
                                power       power                                                      20cm
  Channel                                                                                                                 Limits
    Freq.     modulation
                                                           tune-up power              Gain             Power
   (MHz)                       (dBm)        (dBm)
                                                         (dBm)          (mW)        Numeric      density(mW/cm2 )       (mW/cm2)
                                Ant A       Ant A        Ant A          Ant A        Ant A              Ant A
   2412                         13.88       13±1          14       25.118864          1.60            0.00800              1
   2437        802.11b          12.28       13±1          14       25.118864          1.60            0.00800              1
   2462                         12.73       13±1          14       25.118864          1.60            0.00800              1
   2412                         9.37        10±1          11       12.589254          1.60            0.00401              1
   2437        802.11g          10.31       10±1          11       12.589254          1.60            0.00401              1
   2462                         10.97       10±1          11       12.589254          1.60            0.00401              1
   2412                         9.46        10±1          11       12.589254          1.60            0.00401              1
               802.11n
   2437                         10.11       10±1          11       12.589254          1.60            0.00401              1
                 H20
   2462                         10.68       10±1          11       12.589254          1.60            0.00401              1



Conclusion:

For the max result: 0.00800≤ 1.0 for 1g SAR, No SAR is required.




                                                   ----END OF REPORT----




 Tel:(86-755)88850135          Fax: (86-755) 88850136                  Web: http://www.mtitest.com         E-mail: mti@51mti.com
 Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China



Document Created: 2019-04-24 15:37:37
Document Modified: 2019-04-24 15:37:37

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC